| Age | Commit message (Collapse) | Author |
|---|
|
This commit standardizes the output format for LSNs to ensure consistent
representation across various tools and messages. Previously, LSNs were
inconsistently printed as `%X/%X` in some contexts, while others used
zero-padding. This often led to confusion when comparing.
To address this, the LSN format is now uniformly set to `%X/%08X`,
ensuring the lower 32-bit part is always zero-padded to eight
hexadecimal digits.
Author: Japin Li <[email protected]>
Reviewed-by: Masahiko Sawada <[email protected]>
Reviewed-by: Álvaro Herrera <[email protected]>
Discussion: https://postgr.es/m/ME0P300MB0445CA53CA0E4B8C1879AF84B641A@ME0P300MB0445.AUSP300.PROD.OUTLOOK.COM
|
|
A 'void *' argument suggests that the caller might pass an arbitrary
struct, which is appropriate for functions like libc's read/write, or
pq_sendbytes(). 'uint8 *' is more appropriate for byte arrays that
have no structure, like the cancellation keys or SCRAM tokens. Some
places used 'char *', but 'uint8 *' is better because 'char *' is
commonly used for null-terminated strings. Change code around SCRAM,
MD5 authentication, and cancellation key handling to follow these
conventions.
Discussion: https://www.postgresql.org/message-id/[email protected]
|
|
With GB18030 as source encoding, applications could crash the server via
SQL functions convert() or convert_from(). Applications themselves
could crash after passing unterminated GB18030 input to libpq functions
PQescapeLiteral(), PQescapeIdentifier(), PQescapeStringConn(), or
PQescapeString(). Extension code could crash by passing unterminated
GB18030 input to jsonapi.h functions. All those functions have been
intended to handle untrusted, unterminated input safely.
A crash required allocating the input such that the last byte of the
allocation was the last byte of a virtual memory page. Some malloc()
implementations take measures against that, making the SIGSEGV hard to
reach. Back-patch to v13 (all supported versions).
Author: Noah Misch <[email protected]>
Author: Andres Freund <[email protected]>
Reviewed-by: Masahiko Sawada <[email protected]>
Backpatch-through: 13
Security: CVE-2025-4207
|
|
Word boundaries are based on whether a character is alphanumeric or
not. For the PG_UNICODE_FAST collation, alphanumeric includes
non-ASCII digits; whereas for the PG_C_UTF8 collation, it only
includes digits 0-9. Pass down the right information from the
pg_locale_t into initcap_wbnext to differentiate the behavior.
Reported-by: Noah Misch <[email protected]>
Reviewed-by: Noah Misch <[email protected]>
Discussion: https://postgr.es/m/[email protected]
|
|
Make sure that function declarations use names that exactly match the
corresponding names from function definitions in a few places. These
inconsistencies were all introduced during Postgres 18 development.
This commit was written with help from clang-tidy, by mechanically
applying the same rules as similar clean-up commits (the earliest such
commit was commit 035ce1fe).
|
|
The XLOG_CONTROL_FILE macro (defined in access/xlog_internal.h)
represents the control file name. While some parts of the codebase already
use this macro, others previously hardcoded the file name as a string.
This commit replaces those hardcoded strings with the macro,
ensuring consistent usage throughout the code. This makes future
maintenance easier and improves searchability, for example when
grepping for control file usage.
Author: Anton A. Melnikov <[email protected]>
Reviewed-by: Daniel Gustafsson <[email protected]>
Reviewed-by: Kyotaro Horiguchi <[email protected]>
Reviewed-by: Masao Fujii <[email protected]>
Discussion: https://postgr.es/m/[email protected]
|
|
Reviewed-by: Jeff Davis <[email protected]>
Discussion: https://www.postgresql.org/message-id/flat/[email protected]
|
|
Commit 4e7f62bc386 added a new input file to a script but didn't
update the comment listing the input files.
|
|
The addition of SpecialCasing.txt by commit 286a365b9c2 was not added
to the make target dependencies, so the invoked script would fail
because the required file wasn't downloaded first. (The meson version
appears to work correctly.)
|
|
Setting the iteration count for SCRAM secret generation to INT_MAX
will cause an infinite loop in scram_SaltedPassword() due to integer
overflow, as the loop uses the "i <= iterations" comparison. To fix,
use "i < iterations" instead.
Back-patch to v16 where the user-settable GUC scram_iterations has
been added.
Author: Kevin K Biju <[email protected]>
Reviewed-by: Richard Guo <[email protected]>
Reviewed-by: Michael Paquier <[email protected]>
Discussion: https://postgr.es/m/CAM45KeEMm8hnxdTOxA98qhfZ9CzGDdgy3mxgJmy0c+2WwjA6Zg@mail.gmail.com
|
|
This new option instructs pg_upgrade to move the data directories
from the old cluster to the new cluster and then to replace the
catalog files with those generated for the new cluster. This mode
can outperform --link, --clone, --copy, and --copy-file-range,
especially on clusters with many relations.
However, this mode creates many garbage files in the old cluster,
which can prolong the file synchronization step if
--sync-method=syncfs is used. To handle that, we recommend using
--sync-method=fsync with this mode, and pg_upgrade internally uses
"initdb --sync-only --no-sync-data-files" for file synchronization.
pg_upgrade will synchronize the catalog files as they are
transferred. We assume that the database files transferred from
the old cluster were synchronized prior to upgrade.
This mode also complicates reverting to the old cluster, so we
recommend restoring from backup upon failure during or after file
transfer. We did consider teaching pg_upgrade how to generate a
revert script for such failures, but we decided against it due to
the rarity of failing during file transfer, the complexity of
generating the script, and the potential for misusing the script.
The new mode is limited to clusters located in the same file
system. With some effort, we could probably support upgrades
between different file systems, but this mode is unlikely to offer
much benefit if we have to copy the files across file system
boundaries.
It is also limited to upgrades from version 10 or newer. There are
a few known obstacles for using swap mode to upgrade from older
versions. For example, the visibility map format changed in v9.6,
and the sequence tuple format changed in v10. In fact, swap mode
omits the --sequence-data option in its uses of pg_dump and instead
reuses the old cluster's sequence data files. While teaching swap
mode to deal with these kinds of changes is surely possible (and we
may have to deal with similar problems in the future, anyway), it
doesn't seem worth the effort to support upgrades from
long-unsupported versions.
Reviewed-by: Greg Sabino Mullane <[email protected]>
Reviewed-by: Robert Haas <[email protected]>
Discussion: https://postgr.es/m/Zyvop-LxLXBLrZil%40nathan
|
|
This new option instructs initdb to skip synchronizing any files
in database directories, the database directories themselves, and
the tablespace directories, i.e., everything in the base/
subdirectory and any other tablespace directories. Other files,
such as those in pg_wal/ and pg_xact/, will still be synchronized
unless --no-sync is also specified. --no-sync-data-files is
primarily intended for internal use by tools that separately ensure
the skipped files are synchronized to disk. A follow-up commit
will use this to help optimize pg_upgrade's file transfer step.
The --sync-method=fsync implementation of this option makes use of
a new exclude_dir parameter for walkdir(). When not NULL,
exclude_dir specifies a directory to skip processing. The
--sync-method=syncfs implementation of this option just skips
synchronizing the non-default tablespace directories. This means
that initdb will still synchronize some or all of the database
files, but there's not much we can do about that.
Discussion: https://postgr.es/m/Zyvop-LxLXBLrZil%40nathan
|
|
We have collected several instances of a workaround for GCC bug 53119,
which caused false-positive compiler warnings. This bug has long been
fixed, but was still seen on the buildfarm, most recently on lapwing
with gcc (Debian 4.7.2-5). (The GCC bug tracker mentions that a fix
was backported to 4.7.4 and 4.8.3.)
That compiler no longer runs warning-free since commit 6fdd5d95634, so
we don't need to keep these workarounds. And furthermore, the
consensus appears to be that we don't want to keep supporting that era
of platform anymore at all.
This reverts the following commits:
d937904cce6a3d82e4f9c2127de7b59105a134b3
506428d091760650971433f6bc083531c307b368
b449afb582bb9015bfbb85abc10ce122aef9ec70
6392f2a0968c20ecde4d27b6652703ad931fce92
bad0763a4d7be3005eae35d460c73ac4bc7ebaad
5e0c761d0a13c7b4f7c5de618ac38560d74d74d0
and makes a few similar fixes to newer code.
Discussion: https://www.postgresql.org/message-id/flat/e170d61f-01ab-4cf9-ab68-91cd1fac62c5%40eisentraut.org
Discussion: https://www.postgresql.org/message-id/flat/CA%2BTgmoYEAm-KKZibAP3hSqbTFTjUd47XtVcf3xSFDpyecXX9uQ%40mail.gmail.com
|
|
Reported-by: Tom Lane <[email protected]>
Discussion: https://postgr.es/m/[email protected]
|
|
Commit 27bdec06841 uses a loop variable that is not strictly local to
the loop. Perlcritic disapproves, and there's really no reason as the
variable is not used outside the loop.
Per buildfarm animals koel and crake.
|
|
Improve performance and reduce table sizes for case mapping.
The main case mapping table stores only 16-bit offsets, which can be
used to look up the mapped code point in any of the case tables (fold,
lower, upper, or title case). Simple case pairs point to the same
offsets.
Generate a function in generate-unicode_case_table.pl that consists of
a nested branches to test for specific codepoint ranges that determine
the offset in the main table.
Other approaches were considered, such as representing these ranges as
another structure (rather than branches in a generated function), or a
different approach such as a radix tree, or perfect hashing. The
author implemented and tested these alternatives and settled on the
generated branches.
Author: Alexander Borisov <[email protected]>
Reviewed-by: Heikki Linnakangas <[email protected]>
Discussion: https://postgr.es/m/7cac7e66-9a3b-4e3f-a997-42aa0c401f80%40gmail.com
|
|
We want to support a "noreturn" decoration on more compilers besides
just GCC-compatible ones, but for that we need to move the decoration
in front of the function declaration instead of either behind it or
wherever, which is the current style afforded by GCC-style attributes.
Also rename the macro to "pg_noreturn" to be similar to the C11
standard "noreturn".
pg_noreturn is now supported on all compilers that support C11 (using
_Noreturn), as well as GCC-compatible ones (using __attribute__, as
before), as well as MSVC (using __declspec). (When PostgreSQL
requires C11, the latter two variants can be dropped.)
Now, all supported compilers effectively support pg_noreturn, so the
extra code for !HAVE_PG_ATTRIBUTE_NORETURN can be dropped.
This also fixes a possible problem if third-party code includes
stdnoreturn.h, because then the current definition of
#define pg_attribute_noreturn() __attribute__((noreturn))
would cause an error.
Note that the C standard does not support a noreturn attribute on
function pointer types. So we have to drop these here. There are
only two instances at this time, so it's not a big loss. In one case,
we can make up for it by adding the pg_noreturn to a wrapper function
and adding a pg_unreachable(), in the other case, the latter was
already done before.
Reviewed-by: Dagfinn Ilmari Mannsåker <[email protected]>
Reviewed-by: Andres Freund <[email protected]>
Discussion: https://www.postgresql.org/message-id/flat/pxr5b3z7jmkpenssra5zroxi7qzzp6eswuggokw64axmdixpnk@zbwxuq7gbbcw
|
|
Upcoming optimizations will add complexity to convert_case(). This
patch reorganizes slightly so that the complexity can be contained
within the logic to convert the case of a single character, rather
than mixing it in with logic to iterate through the string.
Reviewed-by: Alexander Borisov <[email protected]>
Discussion: https://postgr.es/m/[email protected]
|
|
For AIO, and also some other recent patches, we need the ability to call
relpath() in a critical section. Until now that was not feasible, as it
allocated memory.
The fact that relpath() allocated memory also made it awkward to use in log
messages because we had to take care to free the memory afterwards. Which we
e.g. didn't do for when zeroing out an invalid buffer.
We discussed other solutions, e.g. filling a pre-allocated buffer that's
passed to relpath(), but they all came with plenty downsides or were larger
projects. The easiest fix seems to be to make relpath() return the path by
value.
To be able to return the path by value we need to determine the maximum length
of a relation path. This patch adds a long #define that computes the exact
maximum, which is verified to be correct in a regression test.
As this change the signature of relpath(), extensions using it will need to
adapt their code. We discussed leaving a backward-compat shim in place, but
decided it's not worth it given the use of relpath() doesn't seem widespread.
Discussion: https://postgr.es/m/xeri5mla4b5syjd5a25nok5iez2kr3bm26j2qn4u7okzof2bmf@kwdh2vf7npra
|
|
Remove a number of (char *) casts that are unnecessary. Or in some
cases, rewrite the code to make the purpose of the cast clearer.
Reviewed-by: Dagfinn Ilmari Mannsåker <[email protected]>
Discussion: https://www.postgresql.org/message-id/flat/fd1fcedb-3492-4fc8-9e3e-74b97f2db6c7%40eisentraut.org
|
|
There are cases where we cannot / do not want to error out for invalidly
encoded input. In such cases it can be useful to replace e.g. an incomplete
multi-byte characters with bytes that will trigger an error when getting
validated as part of a larger string.
Unfortunately, until now, for some encoding no such sequence existed. For
those encodings this commit removes one previously accepted input combination
- we consider that to be ok, as the chosen bytes are outside of the valid
ranges for the encodings, we just previously failed to detect that.
As we cannot add a new field to pg_wchar_table without breaking ABI, this is
implemented "in-line" in the newly added function.
Author: Noah Misch <[email protected]>
Reviewed-by: Andres Freund <[email protected]>
Backpatch-through: 13
Security: CVE-2025-1094
|
|
Expand case mapping tables to include entries for case folding, which
are parsed from CaseFolding.txt.
Discussion: https://postgr.es/m/a1886ddfcd8f60cb3e905c93009b646b4cfb74c5.camel%40j-davis.com
|
|
Most operations beyond pure json parsing need to set need_escapes to
true to get access to field names and string scalars. Document this
fact more explicitly.
Slightly tweaked patch from:
Author: Corey Huinker <[email protected]>
Discussion: https://postgr.es/m/CADkLM=c49Vkfg2+A8ubSuEtaGEjuaKZXCA6SrXA8kdwHjx3uxQ@mail.gmail.com
|
|
Generate tables from Unicode SpecialCasing.txt to support more
sophisticated case mapping behavior:
* support case mappings to multiple codepoints, such as "ß"
uppercasing to "SS"
* support conditional case mappings, such as the "final sigma"
* support titlecase variants, such as "dž" uppercasing to "DŽ" but
titlecasing to "Dž"
Discussion: https://postgr.es/m/[email protected]
Discussion: https://postgr.es/m/[email protected]
Reviewed-by: Peter Eisentraut, Daniel Verite
|
|
Fix a compiler warning found by Cfbot. This was caused by commit
bb86e85e442.
|
|
Previously StringInfo APIs allocated buffers with fixed initial
allocation size of 1024 bytes. This may be too large and inappropriate
for some callers that can do with smaller memory buffers. To fix this,
introduce new APIs that allow callers to specify initial buffer size.
extern StringInfo makeStringInfoExt(int initsize);
extern void initStringInfoExt(StringInfo str, int initsize);
Existing APIs (makeStringInfo() and initStringInfo()) are changed to
call makeStringInfoExt and initStringInfoExt respectively (via inline
helper functions makeStringInfoInternal and initStringInfoInternal),
with the default buffer size of 1024.
Reviewed-by: Nathan Bossart, David Rowley, Michael Paquier, Gurjeet Singh
Discussion: https://postgr.es/m/20241225.123704.1194662271286702010.ishii%40postgresql.org
|
|
Backpatch-through: 13
|
|
This fixes "unresolved external symbol" errors with extensions that
use functions from libcommon. This was reported with pgvector.
Reported-by: Andrew Kane
Author: Vladlen Popolitov
Backpatch-through: 16, where Meson was introduced
Discussion: https://www.postgresql.org/message-id/CAOdR5yF0krWrxycA04rgUKCgKugRvGWzzGLAhDZ9bzNv8g0Lag@mail.gmail.com
|
|
This routine documented that "iterations" would use a default value if
set to 0 by the caller. However, the iteration should always be set by
the caller to a value strictly more than 0, as documented by an
assertion.
Oversight in b577743000cd, that has made the iteration count of SCRAM
configurable.
Author: Matheus Alcantara
Discussion: https://postgr.es/m/[email protected]
Backpatch-through: 16
|
|
Commit 0785d1b8b adds support for libpq as a JSON client, but
allocations for string tokens can still be leaked during parsing
failures. This is tricky to fix for the object_field semantic callbacks:
the field name must remain valid until the end of the object, but if a
parsing error is encountered partway through, object_field_end() won't
be invoked and the client won't get a chance to free the field name.
This patch adds a flag to switch the ownership of parsed tokens to the
lexer. When this is enabled, the client must make a copy of any tokens
it wants to persist past the callback lifetime, but the lexer will
handle necessary cleanup on failure.
Backend uses of the JSON parser don't need to use this flag, since the
parser's allocations will occur in a short lived memory context.
A -o option has been added to test_json_parser_incremental to exercise
the new setJsonLexContextOwnsTokens() API, and the test_json_parser TAP
tests make use of it. (The test program now cleans up allocated memory,
so that tests can be usefully run under leak sanitizers.)
Author: Jacob Champion
Discussion: https://postgr.es/m/CAOYmi+kb38EciwyBQOf9peApKGwraHqA7pgzBkvoUnw5BRfS1g@mail.gmail.com
|
|
Most came in during the 17 cycle, so backpatch there. Some
(particularly reorderbuffer.h) are very old, but backpatching doesn't
seem useful.
Like commits c9d297751959, c4f113e8fef9.
|
|
as determined by IWYU
Similar to commit dbbca2cf299, but for bin and some related files.
Discussion: https://www.postgresql.org/message-id/flat/0df1d5b1-8ca8-4f84-93be-121081bde049%40eisentraut.org
|
|
Presently, each iteration of the loop in sift_down() will perform
3 comparisons if both children are larger than the parent node (2
for comparing each child to the parent node, and a third to compare
the children to each other). By first comparing the children to
each other and then comparing the larger child to the parent node,
we can accomplish the same thing with just 2 comparisons (while
also not affecting the number of comparisons in any other case).
Author: ChangAo Chen
Reviewed-by: Robert Haas
Discussion: https://postgr.es/m/tencent_0142D8DA90940B9930BCC08348BBD6D0BB07%40qq.com
|
|
The test programs in src/common/unicode/ (case_test, category_test,
norm_test), don't build with meson if the nls option is enabled,
because a libintl dependency is missing. Fix that. (The makefiles
are ok.)
Reviewed-by: Aleksander Alekseev <[email protected]>
Discussion: https://www.postgresql.org/message-id/flat/52db1d2b-4b96-473e-b323-a4b16a950fba%40eisentraut.org
|
|
As threatened in the previous patch, define MaxAllocSize in
src/include/common/fe_memutils.h rather than having several
copies of it in different src/common/*.c files. This also
provides an opportunity to document it better.
While this would probably be safe to back-patch, I'll refrain
(for now anyway).
|
|
Coverity complained that pg_saslprep() could suffer integer overflow,
leading to under-allocation of the output buffer, if the input string
exceeds SIZE_MAX/4. This hazard seems largely hypothetical, but it's
easy enough to defend against, so let's do so.
This patch creates a third place in src/common/ where we are locally
defining MaxAllocSize so that we can test against that in the same way
in backend and frontend compiles. That seems like about two places
too many, so the next patch will move that into common/fe_memutils.h.
I'm hesitant to do that in back branches however.
Back-patch to v14. The code looks similar in older branches, but
before commit 67a472d71 there was a separate test on the input string
length that prevented this hazard.
Per Coverity report.
|
|
Commit 5d2e1cc117b introduced some strsep() uses, but it did the
memory management wrong in some cases. We need to keep a separate
pointer to the allocate memory so that we can free it later, because
strsep() advances the pointer we pass to it, and it at the end it
will be NULL, so any free() calls won't do anything.
(This fixes two of the four places changed in commit 5d2e1cc117b. The
other two don't have this problem.)
Reported-by: Alexander Lakhin <[email protected]>
Discussion: https://www.postgresql.org/message-id/flat/[email protected]
|
|
Valgrind reports that checks on lex->inc_state are undefined for the
"dummy lexer" used for incremental parsing, since it's only partially
initialized on the stack. This was introduced in 0785d1b8b2.
Zero-initialize the whole struct.
Author: Jacob Champion <[email protected]>
Reported-by: Alexander Lakhin <[email protected]>
Discussion: https://www.postgresql.org/message-id/CAOYmi+n9QWr4gsAADZc6qFQjFViXQYVk=gBy_EvxuqsgPJcb_g@mail.gmail.com
|
|
When running the 'update-unicode' build target, generate files that
conform to pgindent whitespace rules.
|
|
size_t is the size of an object in memory, not the size of a file on disk.
Thanks to Tom Lane for noting the error.
Discussion: http://postgr.es/m/[email protected]
|
|
Coverity pointed out that inc_lex_level() would leak memory
(not to mention corrupt the pstack data structure) if some
but not all of its three REALLOC's failed. To fix, store
successfully-updated pointers back into the pstack struct
immediately.
Oversight in 0785d1b8b, so no need for back-patch.
|
|
Based on a patch by Michael Paquier.
For libpq, use PQExpBuffer instead of StringInfo. This requires us to
track allocation failures so that we can return JSON_OUT_OF_MEMORY as
needed rather than exit()ing.
Author: Jacob Champion <[email protected]>
Co-authored-by: Michael Paquier <[email protected]>
Co-authored-by: Daniel Gustafsson <[email protected]>
Reviewed-by: Peter Eisentraut <[email protected]>
Discussion: https://www.postgresql.org/message-id/flat/[email protected]
|
|
In case of torn UTF8 in the input data we might end up going
past the end of the string since we don't account for length.
While validation won't be performed on a sequence with a NULL
byte it's better to avoid going past the end to beging with.
Fix by taking the length into consideration.
Author: Jacob Champion <[email protected]>
Reviewed-by: Daniel Gustafsson <[email protected]>
Discussion: https://postgr.es/m/CAOYmi+mTnmM172g=_+Yvc47hzzeAsYPy2C4UBY3HK9p-AXNV0g@mail.gmail.com
|
|
Similarly to 2065ddf5e34c, this introduces a define for "pg_tblspc".
This makes the style more consistent with the existing PG_STAT_TMP_DIR,
for example.
There is a difference with the other cases with the introduction of
PG_TBLSPC_DIR_SLASH, required in two places for recovery and backups.
Author: Bertrand Drouvot
Reviewed-by: Ashutosh Bapat, Álvaro Herrera, Yugo Nagata, Michael
Paquier
Discussion: https://postgr.es/m/[email protected]
|
|
OpenSSL 1.0.2 has been EOL from the upstream OpenSSL project for
some time, and is no longer the default OpenSSL version with any
vendor which package PostgreSQL. By retiring support for OpenSSL
1.0.2 we can remove a lot of no longer required complexity for
managing state within libcrypto which is now handled by OpenSSL.
Reviewed-by: Jacob Champion <[email protected]>
Reviewed-by: Peter Eisentraut <[email protected]>
Reviewed-by: Michael Paquier <[email protected]>
Discussion: https://postgr.es/m/[email protected]
Discussion: https://postgr.es/m/CA+hUKGKh7QrYzu=8yWEUJvXtMVm_CNWH1L_TLWCbZMwbi1XP2Q@mail.gmail.com
|
|
|
|
libpq must not use palloc/pfree. It's not allowed to exit on allocation
failure, and mixing the frontend pfree with malloc is architecturally
unsound.
Remove fe_memutils from the shlib build entirely, to keep devs from
accidentally depending on it in the future.
Author: Jacob Champion <[email protected]>
Discussion: https://www.postgresql.org/message-id/CAOYmi+=pg=W5L1h=3MEP_EB24jaBu2FyATrLXqQHGe7cpuvwyg@mail.gmail.com
|
|
The now preferred way to call realpath() is by passing NULL as the
second argument and get a malloc'ed result. We still supported the
old way of providing our own buffer as a second argument, for some
platforms that didn't support the new way yet. Those were only
Solaris less than version 11 and some older AIX versions (7.1 and
newer appear to support the new variant). We don't support those
platforms versions anymore, so we can remove this extra code.
Reviewed-by: Heikki Linnakangas <[email protected]>
Discussion: https://www.postgresql.org/message-id/flat/9e638b49-5c3f-470f-a392-2cbedb2f7855%40eisentraut.org
|
|
Replace a static scratch buffer with a local variable, because a
static buffer makes the function not thread-safe. This function is
used in client-code in libpq, so it needs to be thread-safe. It was
until commit b67b57a966, which replaced the implementation with the
one from pgcrypto.
Backpatch to v14, where we switched to the new implementation.
Reviewed-by: Robert Haas, Michael Paquier
Discussion: https://www.postgresql.org/message-id/[email protected]
|
|
Reviewed-by: Andres Freund
Discussion: https://www.postgresql.org/message-id/[email protected]
|
