| Age | Commit message (Collapse) | Author |
|---|
|
ParseFraction only expects to deal with fields that contain a decimal
point and digit(s). However it's possible in some edge cases for it
to be passed input that doesn't look like that. In particular the
input could look like a valid floating-point number, such as ".123e6".
strtod() will happily eat that, possibly producing a result that is
not within the expected range 0..1, which can result in integer
overflow in the callers. That doesn't have any security consequences,
but it's still not very desirable. Fix by checking that the input
has the expected form.
Similarly, DecodeNumberField only expects to deal with fields that
contain a decimal point and digit(s), but it's sometimes abused to
parse strings that might not look like that. This could result in
failure to reject bogus input, yielding silly results. Again, fix
by rejecting input that doesn't look as-expected. That decision
also means that we can affirmatively answer the very old comment
questioning whether we couldn't save some duplicative code by
using ParseFractionalSecond here.
While these changes should only reject input that nobody would
consider valid, it still doesn't seem like a change to make in
stable branches. Apply to HEAD only.
Reported-by: Evgeniy Gorbanev <[email protected]>
Author: Tom Lane <[email protected]>
Discussion: https://postgr.es/m/[email protected]
|
|
Continuation of work started in commit 15a79c73, after initial trial.
Author: Thomas Munro <[email protected]>
Discussion: https://postgr.es/m/b936d2fb-590d-49c3-a615-92c3a88c6c19%40eisentraut.org
|
|
If a time zone abbreviation used in datetime input is defined in
the currently active timezone, use that definition in preference
to looking in the timezone_abbreviations list. That allows us to
correctly handle abbreviations that have different meanings in
different timezones. Also, it eliminates an inconsistency between
datetime input and datetime output: the non-ISO datestyles for
timestamptz have always printed abbreviations taken from the IANA
data, not from timezone_abbreviations. Before this fix, it was
possible to demonstrate cases where casting a timestamp to text
and back fails or changes the value significantly because of that
inconsistency.
While this change removes the ability to override the IANA data about
an abbreviation known in the current zone, it's not clear that there's
any real use-case for doing so. But it is clear that this makes life
a lot easier for dealing with abbreviations that have conflicts across
different time zones.
Also update the pg_timezone_abbrevs view to report abbreviations
that are recognized via the IANA data, and *not* report any
timezone_abbreviations entries that are thereby overridden.
Under the hood, there are now two SRFs, one that pulls the IANA
data and one that pulls timezone_abbreviations entries. They're
combined by logic in the view. This approach was useful for
debugging (since the functions can be called on their own).
While I don't intend to document the functions explicitly,
they might be useful to call directly.
Also improve DecodeTimezoneAbbrev's caching logic so that it can
cache zone abbreviations found in the IANA data. Without that,
this patch would have caused a noticeable degradation of the
runtime of timestamptz_in.
Per report from Aleksander Alekseev and additional investigation.
Discussion: https://postgr.es/m/CAJ7c6TOATjJqvhnYsui0=CO5XFMF4dvTGH+skzB--jNhqSQu5g@mail.gmail.com
|
|
Backpatch-through: 13
|
|
Many of them just seem to have been copied around for no real reason.
Their presence causes (small) risks of hiding actual type mismatches
or silently discarding qualifiers
Discussion: https://www.postgresql.org/message-id/flat/[email protected]
|
|
This GUC is written as camel-case in most of the documentation and the
GUC table (but not postgresql.conf.sample), and two error messages
hardcoded it with lower case characters. Let's use a style more
consistent.
Most of the noise comes from the regression tests, updated to reflect
the GUC name in these error messages.
Author: Peter Smith
Reviewed-by: Peter Eisentraut, Álvaro Herrera
Discussion: https://postgr.es/m/CAHut+Pv-kSN8SkxSdoHano_wPubqcg5789ejhCDZAcLFceBR-w@mail.gmail.com
|
|
Commit 3e1a373e2 missed teaching DecodeTimeOnly the same "ptype"
manipulations it added to DecodeDateTime. While likely harmless
at the time, it became a problem after 5b3c59535 added an error check
that ptype must be zero once we exit the parsing loop (that is, there
shouldn't be any unused prefixes). The consequence was that we'd
reject time or timetz input like T12:34:56 (the "extended" format
per ISO 8601-1:2019), even though that still worked in timestamp
input.
Since this is clearly under-tested code, add test cases covering all
the ISO 8601 time formats. (Note: although 8601 allows just "Thh",
we have never accepted that, and this patch doesn't change that.
I'm content to leave that as-is because it seems too likely to be
a mistake rather than intended input. If anyone wants to allow
that, it should be a separate patch anyway, and not back-patched.)
Per bug #18470 from David Perez. Back-patch to v16 where we
broke it.
Discussion: https://postgr.es/m/[email protected]
|
|
as determined by include-what-you-use (IWYU)
While IWYU also suggests to *add* a bunch of #include's (which is its
main purpose), this patch does not do that. In some cases, a more
specific #include replaces another less specific one.
Some manual adjustments of the automatic result:
- IWYU currently doesn't know about includes that provide global
variable declarations (like -Wmissing-variable-declarations), so
those includes are being kept manually.
- All includes for port(ability) headers are being kept for now, to
play it safe.
- No changes of catalog/pg_foo.h to catalog/pg_foo_d.h, to keep the
patch from exploding in size.
Note that this patch touches just *.c files, so nothing declared in
header files changes in hidden ways.
As a small example, in src/backend/access/transam/rmgr.c, some IWYU
pragma annotations are added to handle a special case there.
Discussion: https://www.postgresql.org/message-id/flat/af837490-6b2f-46df-ba05-37ea6a6653fc%40eisentraut.org
|
|
Formerly, these were only supported in to_char(), but there seems
little reason for that restriction. We should at least have enough
support to permit round-tripping the output of to_char().
In that spirit, TZ accepts either zone abbreviations or numeric
(HH or HH:MM) offsets, which are the cases that to_char() can output.
In an ideal world we'd make it take full zone names too, but
that seems like it'd introduce an unreasonable amount of ambiguity,
since the rules for POSIX-spec zone names are so lax.
OF is a subset of this, accepting only HH or HH:MM.
One small benefit of this improvement is that we can simplify
jsonpath's executeDateTimeMethod function, which no longer needs
to consider the HH and HH:MM cases separately. Moreover, letting
it accept zone abbreviations means it will accept "Z" to mean UTC,
which is emitted by JSON.stringify() for example.
Patch by me, reviewed by Aleksander Alekseev and Daniel Gustafsson
Discussion: https://postgr.es/m/[email protected]
|
|
Reported-by: Michael Paquier
Discussion: https://postgr.es/m/[email protected]
Backpatch-through: 12
|
|
This adds support for infinity to the interval data type, using the
same input/output representation as the other date/time data types
that support infinity. This allows various arithmetic operations on
infinite dates, timestamps and intervals.
The new values are represented by setting all fields of the interval
to INT32/64_MIN for -infinity, and INT32/64_MAX for +infinity. This
ensures that they compare as less/greater than all other interval
values, without the need for any special-case comparison code.
Note that, since those 2 values were formerly accepted as legal finite
intervals, pg_upgrade and dump/restore from an old database will turn
them from finite to infinite intervals. That seems OK, since those
exact values should be extremely rare in practice, and they are
outside the documented range supported by the interval type, which
gives us a certain amount of leeway.
Bump catalog version.
Joseph Koshakow, Jian He, and Ashutosh Bapat, reviewed by me.
Discussion: https://postgr.es/m/CAAvxfHea4%2BsPybKK7agDYOMo9N-Z3J6ZXf3BOM79pFsFNcRjwA%40mail.gmail.com
|
|
Interval values now generate an error when the user has multiple
consecutive units or a unit without a value. Previously, it was
possible to specify multiple units consecutively which is contrary to
what the documentation allows, so it was possible to finish with
confusing interval values.
This is a follow-up of the work done in 165d581f146b.
Author: Joseph Koshakow
Reviewed-by: Jacob Champion, Gurjeet Singh, Reid Thompson
Discussion: https://postgr.es/m/CAAvxfHd-yNO+XYnUxL=GaNZ1n+eE0V-oE0+-cC1jdjdU0KS3iw@mail.gmail.com
|
|
This commit Restrict the unit "ago" to only appear at the end of the
interval. According to the documentation, a direction can only be
defined at the end of an interval, but it was possible to define it in
the middle of the string or define it multiple times.
In spirit, this is similar to the error handling improvements done in
5b3c5953553b or bcc704b524904.
Author: Joseph Koshakow
Reviewed-by: Jacob Champion, Gurjeet Singh, Reid Thompson
Discussion: https://postgr.es/m/CAAvxfHd-yNO+XYnUxL=GaNZ1n+eE0V-oE0+-cC1jdjdU0KS3iw@mail.gmail.com
|
|
This commit removes some dead code related to the unit type RESERV,
whose last use has been removed from the unit lookup table used for
intervals ("deltatktbl" in datetime.c) in 666cbae16da4. Before that,
RESERV was used as an equivalent of "invalid", but that's now
unreachable.
Author: Joseph Koshakow
Reviewed-by: Jacob Champion, Gurjeet Singh, Reid Thompson
Discussion: https://postgr.es/m/CAAvxfHd-yNO+XYnUxL=GaNZ1n+eE0V-oE0+-cC1jdjdU0KS3iw@mail.gmail.com
|
|
Run pgindent, pgperltidy, and reformat-dat-files.
This set of diffs is a bit larger than typical. We've updated to
pg_bsd_indent 2.1.2, which properly indents variable declarations that
have multi-line initialization expressions (the continuation lines are
now indented one tab stop). We've also updated to perltidy version
20230309 and changed some of its settings, which reduces its desire to
add whitespace to lines to make assignments etc. line up. Going
forward, that should make for fewer random-seeming changes to existing
code.
Discussion: https://postgr.es/m/[email protected]
|
|
We already had five copies of essentially the same logic, and an
upcoming patch introduces yet another use-case. That's past my
threshold of pain, so introduce a common subroutine. There's not
that much net code savings, but the chance of typos should go down.
Inspired by a patch from Przemysław Sztoch, but different in detail.
Discussion: https://postgr.es/m/[email protected]
|
|
DecodeDateTime and DecodeTimeOnly had support for date input in the
style "Y2023M03D16", which the comments claimed to be an "ISO" format.
However, so far as I can find there is no such format in ISO 8601;
they write units before numbers in intervals, but not in datetimes.
Furthermore, the lesser-known ISO 8601-2 spec actually defines an
incompatible format "2023Y03M16D". None of our documentation mentions
such a format either. So let's just drop it.
That leaves us with only two cases for a prefix unit specifier in
datetimes: Julian dates written as Jnnnn, and the "T" separator
defined by ISO 8601. Add checks to catch misuse of these specifiers,
that is consecutive specifiers or a dangling specifier at the end of
the string. We do not however disallow a specifier that is separated
from the field that it disambiguates (by noise words or unrelated
fields). That being the case, remove some overly-aggressive error
checks from the ISOTIME cases.
Joseph Koshakow, editorialized a bit by me; thanks also to
Peter Eisentraut for some standards-reading.
Discussion: https://postgr.es/m/CAAvxfHf2Q1gKLiHGnuPOiyf0ASvKUM4BnMfsXuwgtYEb_Gx0Zw@mail.gmail.com
|
|
Datetime input formerly accepted combinations such as
'1995-08-06 infinity', but this seems like a clear error.
Reject any combination of regular y/m/d/h/m/s fields with
these special tokens.
Joseph Koshakow, reviewed by Keisuke Kuroda and myself
Discussion: https://postgr.es/m/CAAvxfHdm8wwXwG_FFRaJ1nTHiMWb7YXS2YKCzCt8Q0a2ZoMcHg@mail.gmail.com
|
|
Historically we've accepted interval input like 'P.1e10D'. This
is probably an accident of having used strtod() to do the parsing,
rather than something anyone intended, but it's been that way for
a long time. Commit e39f99046 broke this by trying to parse the
integer and fractional parts separately, without accounting for
the possibility of an exponent. In principle that coding allowed
for precise conversions of field values wider than 15 decimal
digits, but that does not seem like a goal worth sweating bullets
for. So, rather than trying to manage an exponent on top of the
existing complexity, let's just revert to the previous coding that
used strtod() by itself. We can still improve on the old code to
the extent of allowing the value to range up to 1.0e15 rather than
only INT_MAX. (Allowing more than that risks creating problems
due to precision loss: the converted fractional part might have
absolute value more than 1. Perhaps that could be dealt with in
some way, but it really does not seem worth additional effort.)
Per bug #17795 from Alexander Lakhin. Back-patch to v15 where
the faulty code came in.
Discussion: https://postgr.es/m/[email protected]
|
|
Commit e39f99046 moved some code up closer to the start of
DecodeInterval(), without noticing that it had been implicitly
relying on previous checks to reject the case of empty input.
Given empty input, we'd now dereference a pointer that hadn't been
set, possibly leading to a core dump. (But if we fail to provoke
a SIGSEGV, nothing bad happens, and the expected syntax error is
thrown a bit later.)
Per bug #17788 from Alexander Lakhin. Back-patch to v15 where
the fault was introduced.
Discussion: https://postgr.es/m/[email protected]
|
|
Backpatch-through: 11
|
|
The float and numeric types accept this variant spelling of
"infinity", so it seems like the datetime types should too.
Vik Fearing, some cosmetic mods by me
Discussion: https://postgr.es/m/[email protected]
|
|
This shaves some code by replacing the combinations of
CreateTemplateTupleDesc()/TupleDescInitEntry() hardcoding a mapping of
the attributes listed in pg_proc.dat by get_call_result_type() to build
the TupleDesc needed for the rows generated.
get_call_result_type() is more expensive than the former style, but this
removes some duplication with the lists of OUT parameters (pg_proc.dat
and the attributes hardcoded in these code paths). This is applied to
functions that are not considered as critical (aka that could be called
repeatedly for monitoring purposes).
Author: Bharath Rupireddy
Reviewed-by: Robert Haas, Álvaro Herrera, Tom Lane, Michael Paquier
Discussion: https://postgr.es/m/CALj2ACV23HW5HP5hFjd89FNS-z5X8r2jNXdMXcpN2BgTtKd87w@mail.gmail.com
|
|
This patch converts the input functions for date, time, timetz,
timestamp, timestamptz, and interval to the new soft-error style.
There's some related stuff in formatting.c that remains to be
cleaned up, but that seems like a separable project.
Discussion: https://postgr.es/m/[email protected]
|
|
Pay down some ancient technical debt (dating to commit 022fd9966):
fix a couple of places in datetime parsing that were throwing
ereport's immediately instead of returning a DTERR code that could be
interpreted by DateTimeParseError. The reason for that was that there
was no mechanism for passing any auxiliary data (such as a zone name)
to DateTimeParseError, and these errors seemed to really need it.
Up to now it didn't matter that much just where the error got thrown,
but now we'd like to have a hard policy that datetime parse errors
get thrown from just the one place.
Hence, invent a "DateTimeErrorExtra" struct that can be used to
carry any extra values needed for specific DTERR codes. Perhaps
in the future somebody will be motivated to use this to improve
the specificity of other DateTimeParseError messages, but for now
just deal with the timezone-error cases.
This is on the way to making the datetime input functions report
parse errors softly; but it's really an independent change, so
commit separately.
Discussion: https://postgr.es/m/[email protected]
|
|
More could be done in this line, but I just grabbed some low-hanging
fruit. Principal objective was to remove the need for several ugly
unconstify() usages in formatting.c.
|
|
Per discussion, the existing routine name able to initialize a SRF
function with materialize mode is unpopular, so rename it. Equally, the
flags of this function are renamed, as of:
- SRF_SINGLE_USE_EXPECTED -> MAT_SRF_USE_EXPECTED_DESC
- SRF_SINGLE_BLESS -> MAT_SRF_BLESS
The previous function and flags introduced in 9e98583 are kept around
for compatibility purposes, so as any extension code already compiled
with v15 continues to work as-is. The declarations introduced here for
compatibility will be removed from HEAD in a follow-up commit.
The new names have been suggested by Andres Freund and Melanie
Plageman.
Discussion: https://postgr.es/m/[email protected]
Backpatch-through: 15
|
|
The only real argument for using malloc directly was that we needed
the ability to not throw error on OOM; but mcxt.c grew that feature
awhile ago.
Keeping the data in a memory context improves accountability and
debuggability --- for example, without this it's almost impossible
to detect memory leaks in the GUC code with anything less costly
than valgrind. Moreover, the next patch in this series will add a
hash table for GUC lookup, and it'd be pretty silly to be using
palloc-dependent hash facilities alongside malloc'd storage of the
underlying data.
This is a bit invasive though, in particular causing an API break
for GUC check hooks that want to modify the GUC's value or use an
"extra" data structure. They must now use guc_malloc() and
guc_free() instead of malloc() and free(). Failure to change
affected code will result in assertion failures or worse; but
thanks to recent effort in the mcxt infrastructure, it shouldn't
be too hard to diagnose such oversights (at least in assert-enabled
builds).
One note is that this changes ParseLongOption() to return short-lived
palloc'd not malloc'd data. There wasn't any caller for which the
previous definition was better.
Discussion: https://postgr.es/m/[email protected]
|
|
Instead of Abs() for int64, use the C standard functions labs() or
llabs() as appropriate. Define a small wrapper around them that
matches our definition of int64. (labs() is C90, llabs() is C99.)
Reviewed-by: Zhang Mingli <[email protected]>
Reviewed-by: Tom Lane <[email protected]>
Discussion: https://www.postgresql.org/message-id/flat/4beb42b5-216b-bce8-d452-d924d5794c63%40enterprisedb.com
|
|
Use C standard abs() or fabs() instead.
Reviewed-by: Zhang Mingli <[email protected]>
Reviewed-by: Tom Lane <[email protected]>
Discussion: https://www.postgresql.org/message-id/flat/4beb42b5-216b-bce8-d452-d924d5794c63%40enterprisedb.com
|
|
In a similar effort to f01592f91, here we mostly rename shadowed local
variables to remove the warnings produced when compiling with
-Wshadow=compatible-local.
This fixes 63 warnings and leaves just 5.
Author: Justin Pryzby, David Rowley
Reviewed-by: Justin Pryzby
Discussion https://postgr.es/m/20220817145434.GC26426%40telsasoft.com
|
|
Make sure that function declarations use names that exactly match the
corresponding names from function definitions in optimizer, parser,
utility, libpq, and "commands" code, as well as in remaining library
code. Do the same for all code related to frontend programs (with the
exception of pg_dump/pg_dumpall related code).
Like other recent commits that cleaned up function parameter names, this
commit was written with help from clang-tidy. Later commits will handle
ecpg and pg_dump/pg_dumpall.
Author: Peter Geoghegan <[email protected]>
Reviewed-By: David Rowley <[email protected]>
Discussion: https://postgr.es/m/CAH2-WznJt9CMM9KJTMjJh_zbL5hD9oX44qdJ4aqZtjFi-zA3Tg@mail.gmail.com
|
|
This replaces all MemSet() calls with struct initialization where that
is easily and obviously possible. (For example, some cases have to
worry about padding bits, so I left those.)
(The same could be done with appropriate memset() calls, but this
patch is part of an effort to phase out MemSet(), so it doesn't touch
memset() calls.)
Reviewed-by: Ranier Vilela <[email protected]>
Reviewed-by: Alvaro Herrera <[email protected]>
Discussion: https://www.postgresql.org/message-id/[email protected]
|
|
datetime.c's parsing logic has assumed that strtod() will accept
a string that looks like ".", which it does in glibc, but not on
some less-common platforms such as AIX. The result of this was
that datetime fields like "123." would be accepted on some platforms
but not others; which is a sufficiently odd case that it's not that
surprising we've heard no field complaints. But commit e39f99046
extended that assumption to new places, and happened to add a test
case that exposed the platform dependency. Remove this dependency
by special-casing situations without any digits after the decimal
point.
(Again, this is in part a pre-existing bug but I don't feel a
compulsion to back-patch.)
Also, rearrange e39f99046's changes in formatting.c to avoid a
Coverity complaint that we were copying an uninitialized field.
Discussion: https://postgr.es/m/[email protected]
|
|
DecodeInterval (interval input) was careless about integer-overflow
hazards, allowing bogus results to be obtained for sufficiently
large input values. Also, since it initially converted the input
to a "struct tm", it was impossible to produce the full range of
representable interval values.
Meanwhile, EncodeInterval (interval output) and a few other
functions could suffer failures if asked to process sufficiently
large interval values, because they also relied on being able to
represent an interval in "struct tm" which is not designed to
handle that.
Fix all this stuff by introducing new struct types that are more
fit for purpose.
While this is clearly a bug fix, it's also an API break for any
code that's calling these functions directly. So back-patching
doesn't seem wise, especially in view of the lack of field
complaints.
Joe Koshakow, editorialized a bit by me
Discussion: https://postgr.es/m/CAAvxfHff0JLYHwyBrtMx_=6wr=k2Xp+D+-X3vEhHjJYMj+mQcg@mail.gmail.com
|
|
Set-returning functions that use the Materialize mode, creating a
tuplestore to include all the tuples returned in a set rather than doing
so in multiple calls, use roughly the same set of steps to prepare
ReturnSetInfo for this job:
- Check if ReturnSetInfo supports returning a tuplestore and if the
materialize mode is enabled.
- Create a tuplestore for all the tuples part of the returned set in the
per-query memory context, stored in ReturnSetInfo->setResult.
- Build a tuple descriptor mostly from get_call_result_type(), then
stored in ReturnSetInfo->setDesc. Note that there are some cases where
the SRF's tuple descriptor has to be the one specified by the function
caller.
This refactoring is done so as there are (well, should be) no behavior
changes in any of the in-core functions refactored, and the centralized
function that checks and sets up the function's ReturnSetInfo can be
controlled with a set of bits32 options. Two of them prove to be
necessary now:
- SRF_SINGLE_USE_EXPECTED to use expectedDesc as tuple descriptor, as
expected by the function's caller.
- SRF_SINGLE_BLESS to validate the tuple descriptor for the SRF.
The same initialization pattern is simplified in 28 places per my
count as of src/backend/, shaving up to ~900 lines of code. These
mostly come from the removal of the per-query initializations and the
sanity checks now grouped in a single location. There are more
locations that could be simplified in contrib/, that are left for a
follow-up cleanup.
fcc2817, 07daca5 and d61a361 have prepared the areas of the code related
to this change, to ease this refactoring.
Author: Melanie Plageman, Michael Paquier
Reviewed-by: Álvaro Herrera, Justin Pryzby
Discussion: https://postgr.es/m/CAAKRu_azyd1Z3W_r7Ou4sorTjRCs+PxeHw1CWJeXKofkE6TuZg@mail.gmail.com
|
|
Backpatch-through: 10
|
|
Previously spilled units greater than months were truncated to months.
Also document the spill behavior.
Reported-by: Bryn Llewelly
Discussion: https://postgr.es/m/[email protected]
Backpatch-through: master
|
|
Turns out you can specify negative values using plurals:
https://english.stackexchange.com/questions/9735/is-1-followed-by-a-singular-or-plural-noun
so the previous code was correct enough, and consistent with other usage
in our code. Also add comment in the two places where this could be
confused.
Reported-by: Noah Misch
Diagnosed-by: [email protected]
|
|
This outputs "-1 year", not "-1 years".
Reported-by: [email protected]
Bug: 16939
Discussion: https://postgr.es/m/[email protected]
|
|
Backpatch-through: 9.5
|
|
SQL operations such as CURRENT_DATE, CURRENT_TIME, LOCALTIME, and
conversion of "now" in a datetime input string have to obtain the
transaction start timestamp ("now()") as a broken-down struct pg_tm.
This is a remarkably expensive conversion, and since now() does not
change intra-transaction, it doesn't really need to be done more than
once per transaction. Introducing a simple cache provides visible
speedups in queries that compute these values many times, for example
insertion of many rows that use a default value of CURRENT_DATE.
Peter Smith, with a bit of kibitzing by me
Discussion: https://postgr.es/m/CAHut+Pu89TWjq530V2gY5O6SWi=OEJMQ_VHMt8bdZB_9JFna5A@mail.gmail.com
|
|
Commit 54cd4f045 added some kluges to work around an old glibc bug,
namely that %.*s could misbehave if glibc thought any characters in
the supplied string were incorrectly encoded. Now that we use our
own snprintf.c implementation, we need not worry about that bug (even
if it still exists in the wild). Revert a couple of particularly
ugly hacks, and remove or improve assorted comments.
Note that there can still be encoding-related hazards here: blindly
clipping at a fixed length risks producing wrongly-encoded output
if the clip splits a multibyte character. However, code that's
doing correct multibyte-aware clipping doesn't really need a comment
about that, while code that isn't needs an explanation why not,
rather than a red-herring comment about an obsolete bug.
Discussion: https://postgr.es/m/[email protected]
|
|
It's intentional that we don't allow values greater than 24 hours,
while we do allow "24:00:00" as well as "23:59:60" as inputs.
However, the range check was miscoded in such a way that it would
accept "23:59:60.nnn" with a nonzero fraction. For time or timetz,
the stored result would then be greater than "24:00:00" which would
fail dump/reload, not to mention possibly confusing other operations.
Fix by explicitly calculating the result and making sure it does not
exceed 24 hours. (This calculation is redundant with what will happen
later in tm2time or tm2timetz. Maybe someday somebody will find that
annoying enough to justify refactoring to avoid the duplication; but
that seems too invasive for a back-patched bug fix, and the cost is
probably unmeasurable anyway.)
Note that this change also rejects such input as the time portion
of a timestamp(tz) value.
Back-patch to v10. The bug is far older, but to change this pre-v10
we'd need to ensure that the logic behaves sanely with float timestamps,
which is possibly nontrivial due to roundoff considerations.
Doesn't really seem worth troubling with.
Per report from Christoph Berg.
Discussion: https://postgr.es/m/[email protected]
|
|
Thomas Munro fixed a longstanding annoyance in pg_bsd_indent, that
it would misformat lines containing IsA() macros on the assumption
that the IsA() call should be treated like a cast. This improves
some other cases involving field/variable names that match typedefs,
too. The only places that get worse are a couple of uses of the
OpenSSL macro STACK_OF(); we'll gladly take that trade-off.
Discussion: https://postgr.es/m/[email protected]
|
|
Includes some manual cleanup of places that pgindent messed up,
most of which weren't per project style anyway.
Notably, it seems some people didn't absorb the style rules of
commit c9d297751, because there were a bunch of new occurrences
of function calls with a newline just after the left paren, all
with faulty expectations about how the rest of the call would get
indented.
|
|
This extends the fixes made in commit 085b6b667 to other SRFs with the
same bug, namely pg_logdir_ls(), pgrowlocks(), pg_timezone_names(),
pg_ls_dir(), and pg_tablespace_databases().
Also adjust various comments and documentation to warn against
expecting to clean up resources during a ValuePerCall SRF's final
call.
Back-patch to all supported branches, since these functions were
all born broken.
Justin Pryzby, with cosmetic tweaks by me
Discussion: https://postgr.es/m/[email protected]
|
|
Using a lookup table of digit pairs reduces the number of divisions
needed, and calculating the length upfront saves some work; these
ideas are taken from the code previously committed for floats.
David Fetter, reviewed by Kyotaro Horiguchi, Tels, and me.
Discussion: https://postgr.es/m/20190924052620.GP31596%40fetter.org
|
|
Backpatch-through: update all files in master, backpatch legal files through 9.4
|
|
Discussion: https://postgr.es/m/[email protected]
|
