| Age | Commit message (Collapse) | Author |
|---|
|
The macros INJECTION_POINT() and INJECTION_POINT_CACHED() are extended
with an optional argument that can be passed down to the callback
attached when an injection point is run, giving to callbacks the
possibility to manipulate a stack state given by the caller. The
existing callbacks in modules injection_points and test_aio have their
declarations adjusted based on that.
da7226993fd4 (core AIO infrastructure) and 93bc3d75d8e1 (test_aio) and
been relying on a set of workarounds where a static variable called
pgaio_inj_cur_handle is used as runtime argument in the injection point
callbacks used by the AIO tests, in combination with a TRY/CATCH block
to reset the argument value. The infrastructure introduced in this
commit will be reused for the AIO tests, simplifying them.
Reviewed-by: Greg Burd <[email protected]>
Discussion: https://postgr.es/m/[email protected]
|
|
Refactor for upcoming optimizations.
Reviewed-by: David Rowley <[email protected]>
Discussion: https://postgr.es/m/[email protected]
|
|
The entries aren't freed until the entire hash table is destroyed, so
use the Bump allocator to improve allocation speed, avoid wasting
space on the chunk header, and avoid wasting space due to the
power-of-two allocations.
Discussion: https://postgr.es/m/CAApHDvqv1aNB4cM36FzRwivXrEvBO_LsG_eQ3nqDXTjECaatOQ@mail.gmail.com
Reviewed-by: David Rowley
|
|
Knowing when the side-effects of an expression is the intended result
of the execution, rather than the returnvalue, is important for being
able generate more efficient JITed code. This replaces EEOP_DONE with
two new steps: EEOP_DONE_RETURN and EEOP_DONE_NO_RETURN. Expressions
which return a value should use the former step; expressions used for
their side-effects which don't return value should use the latter.
Author: Andres Freund <[email protected]>
Co-authored-by: Daniel Gustafsson <[email protected]>
Reviewed-by: Andreas Karlsson <[email protected]>
Discussion: https://postgr.es/m/[email protected]
Discussion: https://postgr.es/m/[email protected]
|
|
Author: Zhang Mingli
Reviewed-by: Richard Guo
Discussion: https://postgr.es/m/198a8d1e-0792-4e7f-828e-902aa342f36e@Spark
|
|
Requires adding a guard against shift-by-32. Previously, that was
impossible because the number of partitions was always greater than 1,
but a new injection point can force the number of partitions to 1.
Discussion: https://postgr.es/m/[email protected]
|
|
This reverts commit e0ece2a981ee9068f50c4423e303836c2585eb02 due to
performance regressions.
Reported-by: David Rowley
|
|
Previously, the caller needed to allocate the memory and the
TupleHashTable would store a pointer to it. That wastes space for the
palloc overhead as well as the size of the pointer itself.
Now, the TupleHashTable relies on the caller to correctly specify the
additionalsize, and allocates that amount of space. The caller can
then request a pointer into that space.
Discussion: https://postgr.es/m/[email protected]
Reviewed-by: Heikki Linnakangas
|
|
Functions hash_agg_entry_size() and build_hash_tables() make use of
those values for memory size estimates.
Because this change only affects memory estimates, don't backpatch.
Discussion: https://postgr.es/m/7530bd8783b1a78d53a3c70383e38d8da0a5ffe5.camel%40j-davis.com
|
|
CHUNKHDRSZ was defined as 16 bytes, which was true when that code went in,
but since c6e0fe1f2, 8 is a more accurate value. Here we adjust it to use
sizeof(MemoryChunk), which is normally 8, or 16 for cassert builds.
c6e0fe1f2 first appeared in v16, so this is technically wrong in v16 up
to master, but let's apply this only to master as adjusting this does
influence the estimated number of batches in the aggregate costing code
and we don't want to cause plan instability in released versions.
Reviewed-by: Tom Lane
Discussion: https://postgr.es/m/CAApHDvpMpRQvsTqZo3FinXkgytwxwF8sCyZm83xDj-1s_hLe+w@mail.gmail.com
|
|
Backpatch-through: 13
|
|
It was reasonable to preserve the old API of BuildTupleHashTable()
in the back branches, but in HEAD we should actively discourage use
of that version. There are no remaining callers in core, so just
get rid of it. Then rename BuildTupleHashTableExt() back to
BuildTupleHashTable().
While at it, fix up the miserably-poorly-maintained header comment
for BuildTupleHashTable[Ext]. It looks like more than one patch in
this area has had the opinion that updating comments is beneath them.
Discussion: https://postgr.es/m/[email protected]
|
|
0f5738202 adjusted the execGrouping.c code so it made use of ExprStates to
generate hash values. That commit made a wrong assumption that the slot
type to pass to ExecBuildHash32FromAttrs() is always &TTSOpsMinimalTuple.
That's not the case as the slot type depends on the slot type passed to
LookupTupleHashEntry(), which for nodeRecursiveunion.c, could be any of
the current slot types.
Here we fix this by adding a new parameter to BuildTupleHashTableExt()
to allow the slot type to be passed in. In the case of nodeSubplan.c
and nodeAgg.c the slot type is always &TTSOpsVirtual, so for both of
those cases, it's beneficial to pass the known slot type as that allows
ExecBuildHash32FromAttrs() to skip adding the tuple deform step to the
resulting ExprState. Another possible fix would have been to have
ExecBuildHash32FromAttrs() set "fetch.kind" to NULL so that
ExecComputeSlotInfo() always determines the EEOP_INNER_FETCHSOME is
required, however, that option isn't favorable as slows down aggregation
and hashed subplan evaluation due to the extra (needless) deform step.
Thanks to Nathan Bossart for bisecting to find the offending commit
based on Paul's report.
Reported-by: Paul Ramsey <[email protected]>
Discussion: https://postgr.es/m/[email protected]
|
|
Many of them just seem to have been copied around for no real reason.
Their presence causes (small) risks of hiding actual type mismatches
or silently discarding qualifiers
Discussion: https://www.postgresql.org/message-id/flat/[email protected]
|
|
as determined by include-what-you-use (IWYU)
While IWYU also suggests to *add* a bunch of #include's (which is its
main purpose), this patch does not do that. In some cases, a more
specific #include replaces another less specific one.
Some manual adjustments of the automatic result:
- IWYU currently doesn't know about includes that provide global
variable declarations (like -Wmissing-variable-declarations), so
those includes are being kept manually.
- All includes for port(ability) headers are being kept for now, to
play it safe.
- No changes of catalog/pg_foo.h to catalog/pg_foo_d.h, to keep the
patch from exploding in size.
Note that this patch touches just *.c files, so nothing declared in
header files changes in hidden ways.
As a small example, in src/backend/access/transam/rmgr.c, some IWYU
pragma annotations are added to handle a special case there.
Discussion: https://www.postgresql.org/message-id/flat/af837490-6b2f-46df-ba05-37ea6a6653fc%40eisentraut.org
|
|
Reported-by: Michael Paquier
Discussion: https://postgr.es/m/[email protected]
Backpatch-through: 12
|
|
This commit removes unnecessary ExecExprFreeContext() calls in
ExecEnd* routines because the actual cleanup is managed by
FreeExecutorState(). With no callers remaining for
ExecExprFreeContext(), this commit also removes the function.
This commit also drops redundant ExecClearTuple() calls, because
ExecResetTupleTable() in ExecEndPlan() already takes care of
resetting and dropping all TupleTableSlots initialized with
ExecInitScanTupleSlot() and ExecInitExtraTupleSlot().
After these modifications, the ExecEnd*() routines for ValuesScan,
NamedTuplestoreScan, and WorkTableScan became redundant. So, this
commit removes them.
Reviewed-by: Robert Haas
Discussion: https://postgr.es/m/CA+HiwqFGkMSge6TgC9KQzde0ohpAycLQuV7ooitEEpbKB0O_mg@mail.gmail.com
|
|
Run pgindent, pgperltidy, and reformat-dat-files.
This set of diffs is a bit larger than typical. We've updated to
pg_bsd_indent 2.1.2, which properly indents variable declarations that
have multi-line initialization expressions (the continuation lines are
now indented one tab stop). We've also updated to perltidy version
20230309 and changed some of its settings, which reduces its desire to
add whitespace to lines to make assignments etc. line up. Going
forward, that should make for fewer random-seeming changes to existing
code.
Discussion: https://postgr.es/m/[email protected]
|
|
The problem that these messages protect against can only occur because
a corrupted hash spill file was written, i.e., a Postgres bug. There's
no reason to have them as translatable.
Backpatch to 15, where these messages were changed by commit c4649cce39a4.
Reviewed-by: Daniel Gustafsson <[email protected]>
Discussion: https://postgr.es/m/[email protected]
|
|
The changes done in this commit impact comments with no direct
user-visible changes, with fixes for incorrect function, variable or
structure names.
Author: Alexander Lakhin
Discussion: https://postgr.es/m/[email protected]
|
|
The name of this function suggests that it ought to reparent R/W
expanded objects to be children of the persistent aggcontext, instead
of copying them. In fact it does no such thing, and if you try to
make it do so you will see multiple regression failures. Rename it
to the less-misleading ExecAggCopyTransValue, and add commentary
about why that attractive-sounding optimization won't work. Also
adjust comments at call sites, some of which were describing logic
that has since been moved into ExecAggCopyTransValue.
Discussion: https://postgr.es/m/[email protected]
|
|
Author: Alexander Lakhin
Discussion: https://postgr.es/m/[email protected]
|
|
The finalfunc might return a read-write expanded object. If we
de-duplicate multiple call sites for the aggregate, any function(s)
receiving the aggregate result earlier could alter or destroy the
value that reaches the ones called later. This is a brown-paper-bag
bug in commit 42b746d4c, because we actually considered the need
for read-only-ness but failed to realize that it applied to the case
with a finalfunc as well as the case without.
Per report from Justin Pryzby. New error in HEAD,
no need for back-patch.
Discussion: https://postgr.es/m/[email protected]
|
|
nodeAppend.c used non-nullness of appendstate->as_valid_subplans as
a state flag to indicate whether it'd done ExecFindMatchingSubPlans
(or some sufficient approximation to that). This was pretty
questionable even in the beginning, since it wouldn't really work
right if there are no valid subplans. It got more questionable
after commit 27e1f1456 added logic that could reduce as_valid_subplans
to an empty set: at that point we were depending on unspecified
behavior of bms_del_members, namely that it'd not return an empty
set as NULL. It's about to start doing that, which breaks this
logic entirely. Hence, add a separate boolean flag to signal
whether as_valid_subplans has been computed.
Also fix a previously-cosmetic bug in nodeAgg.c, wherein it ignored
the return value of bms_del_member instead of updating its pointer.
Patch by me; thanks to Nathan Bossart and Richard Guo for review.
Discussion: https://postgr.es/m/[email protected]
|
|
This function has been semi-deprecated ever since we invented
bms_next_member(). Its habit of scribbling on the input bitmapset
isn't great, plus for sufficiently large bitmapsets it would take
O(N^2) time to complete a loop. Now we have the additional problem
that reducing the input to empty while leaving it still accessible
would violate a planned invariant. So let's just get rid of it,
after updating the few extant callers to use bms_next_member().
Patch by me; thanks to Nathan Bossart and Richard Guo for review.
Discussion: https://postgr.es/m/[email protected]
|
|
Avoid explicitly grouping by columns that we know are redundant
for sorting, for example we need group by only one of x and y in
SELECT ... WHERE x = y GROUP BY x, y
This comes up more often than you might think, as shown by the
changes in the regression tests. It's nearly free to detect too,
since we are just piggybacking on the existing logic that detects
redundant pathkeys. (In some of the existing plans that change,
it's visible that a sort step preceding the grouping step already
didn't bother to sort by the redundant column, making the old plan
a bit silly-looking.)
To do this, build processed_groupClause and processed_distinctClause
lists that omit any provably-redundant sort items, and consult those
not the originals where relevant. This means that within the
planner, one should usually consult root->processed_groupClause or
root->processed_distinctClause if one wants to know which columns
are to be grouped on; but to check whether grouping or distinct-ing
is happening at all, check non-NIL-ness of parse->groupClause or
parse->distinctClause. This is comparable to longstanding rules
about handling the HAVING clause, so I don't think it'll be a huge
maintenance problem.
nodeAgg.c also needs minor mods, because it's now possible to generate
AGG_PLAIN and AGG_SORTED Agg nodes with zero grouping columns.
Patch by me; thanks to Richard Guo and David Rowley for review.
Discussion: https://postgr.es/m/[email protected]
|
|
When considering an empty grouping set, we fetched
phasedata->eqfunctions[-1]. Because the eqfunctions array is
palloc'd, that would always be an aset pointer in released versions,
and thus the code accidentally failed to malfunction (since it would
do nothing unless it found a null pointer). Nonetheless this seems
like trouble waiting to happen, so add a check for length == 0.
It's depressing that our valgrind testing did not catch this.
Maybe we should reconsider the choice to not mark that word NOACCESS?
Richard Guo
Discussion: https://postgr.es/m/CAMbWs4-vZuuPOZsKOYnSAaPYGKhmacxhki+vpOKk0O7rymccXQ@mail.gmail.com
|
|
Backpatch-through: 11
|
|
Some code carefully cast all data buffer arguments for data write and
read function calls to void *, even though the respective arguments
are already void *. Remove this unnecessary clutter.
Discussion: https://www.postgresql.org/message-id/flat/11dda853-bb5b-59ba-a746-e168b1ce4bdb%40enterprisedb.com
|
|
Instead of dozens of mostly-duplicate pg_foo_aclcheck() functions,
write one common function object_aclcheck() that can handle almost all
of them. We already have all the information we need, such as which
system catalog corresponds to which catalog table and which column is
the ACL column.
There are a few pg_foo_aclcheck() that don't work via the generic
function and have special APIs, so those stay as is.
I also changed most pg_foo_aclmask() functions to static functions,
since they are not used outside of aclchk.c.
Reviewed-by: Corey Huinker <[email protected]>
Reviewed-by: Antonin Houska <[email protected]>
Discussion: https://www.postgresql.org/message-id/flat/[email protected]
|
|
Here we add a new 'copy' parameter to tuplesort_getdatum so that we can
instruct the function not to datumCopy() byref Datums before returning.
Similar to 91e9e89dc, this can provide significant performance
improvements in nodeSort when sorting by a single byref column and the
sort's targetlist contains only that column.
This allows us to re-enable Datum sorts for byref types which was disabled
in 3a5817695 due to a reported memory leak.
Additionally, here we slightly optimize DISTINCT aggregates so that we no
longer perform any datumCopy() when we find the current value not to be
distinct from the previous value. Previously the code would always take a
copy of the most recent Datum and pfree the previous value, even when the
values were the same. Testing shows a small but noticeable performance
increase when aggregate transitions are skipped due to the current
transition value being the same as the prior one.
Author: David Rowley
Discussion: https://postgr.es/m/CAApHDvqS6wC5U==k9Hd26E4EQXH3QR67-T4=Q1rQ36NGvjfVSg@mail.gmail.com
Discussion: https://postgr.es/m/CAApHDvqHonfe9G1cVaKeHbDx70R_zCrM3qP2AGXpGrieSKGnhA@mail.gmail.com
|
|
MemoryContextContains is no longer reliable in the wake of c6e0fe1f2,
so we need to get rid of these uses.
It appears that there's no really good reason to force the result of
an aggregate's finalfn or serialfn to be allocated in the per-tuple
context. The only other plausible case is that the result points to
or into the aggregate's transition value, and that's fine because it
will last as long as we need it to. (This conclusion depends on the
assumption that finalfns are not allowed to scribble on the transition
value, but we've long required that.) So we can just drop the
MemoryContextContains plus datumCopy business, although we do need
to take care to not return a read-write pointer when the transition
value is an expanded datum.
Likewise, we don't really need to force the result of a window
function to be in the output context. In this case, the plausible
alternative is that it's pointing into the temporary tuple slot used
by WinGetFuncArgInPartition or WinGetFuncArgInFrame (since those
functions could return such a pointer, which might become the window
function's result). That will hold still for long enough, unless
there is another window function using the same WindowObject.
I'm content to always perform a datumCopy when there's more than one
such function.
On net, these changes should provide small speed improvements as well
as removing problematic code.
Tom Lane and David Rowley
Discussion: https://postgr.es/m/[email protected]
|
|
In a similar effort to f01592f91, here we mostly rename shadowed local
variables to remove the warnings produced when compiling with
-Wshadow=compatible-local.
This fixes 63 warnings and leaves just 5.
Author: Justin Pryzby, David Rowley
Reviewed-by: Justin Pryzby
Discussion https://postgr.es/m/20220817145434.GC26426%40telsasoft.com
|
|
Make sure that function declarations use names that exactly match the
corresponding names from function definitions in storage, catalog,
access method, executor, and logical replication code, as well as in
miscellaneous utility/library code.
Like other recent commits that cleaned up function parameter names, this
commit was written with help from clang-tidy. Later commits will do the
same for other parts of the codebase.
Author: Peter Geoghegan <[email protected]>
Reviewed-By: David Rowley <[email protected]>
Discussion: https://postgr.es/m/CAH2-WznJt9CMM9KJTMjJh_zbL5hD9oX44qdJ4aqZtjFi-zA3Tg@mail.gmail.com
|
|
In a similar effort to f01592f91, here we're targetting fixing the
warnings that -Wshadow=compatible-local produces that we can fix by moving
a variable to an inner scope to stop that variable from being shadowed by
another variable declared somewhere later in the function.
All of the warnings being fixed here are changing the scope of variables
which are being used as an iterator for a "for" loop. In each instance,
the fix happens to be changing the for loop to use the C99 type
initialization. Much of this code likely pre-dates our use of C99.
Reducing the scope of the outer scoped variable seems like the safest way
to fix these. Renaming seems more likely to risk patches using the wrong
variable. Reducing the scope is more likely to result in a compilation
failure after applying some future patch rather than introducing bugs with
it.
By my count, this takes the warning count from 129 down to 114.
Author: Justin Pryzby
Discussion: https://postgr.es/m/CAApHDvrwLGBP%2BYw9vriayyf%3DXR4uPWP5jr6cQhP9au_kaDUhbA%40mail.gmail.com
|
|
ORDER BY / DISTINCT aggreagtes have, since implemented in Postgres, been
executed by always performing a sort in nodeAgg.c to sort the tuples in
the current group into the correct order before calling the transition
function on the sorted tuples. This was not great as often there might be
an index that could have provided pre-sorted input and allowed the
transition functions to be called as the rows come in, rather than having
to store them in a tuplestore in order to sort them once all the tuples
for the group have arrived.
Here we change the planner so it requests a path with a sort order which
supports the most amount of ORDER BY / DISTINCT aggregate functions and
add new code to the executor to allow it to support the processing of
ORDER BY / DISTINCT aggregates where the tuples are already sorted in the
correct order.
Since there can be many ORDER BY / DISTINCT aggregates in any given query
level, it's very possible that we can't find an order that suits all of
these aggregates. The sort order that the planner chooses is simply the
one that suits the most aggregate functions. We take the most strictly
sorted variation of each order and see how many aggregate functions can
use that, then we try again with the order of the remaining aggregates to
see if another order would suit more aggregate functions. For example:
SELECT agg(a ORDER BY a),agg2(a ORDER BY a,b) ...
would request the sort order to be {a, b} because {a} is a subset of the
sort order of {a,b}, but;
SELECT agg(a ORDER BY a),agg2(a ORDER BY c) ...
would just pick a plan ordered by {a} (we give precedence to aggregates
which are earlier in the targetlist).
SELECT agg(a ORDER BY a),agg2(a ORDER BY b),agg3(a ORDER BY b) ...
would choose to order by {b} since two aggregates suit that vs just one
that requires input ordered by {a}.
Author: David Rowley
Reviewed-by: Ronan Dunklau, James Coleman, Ranier Vilela, Richard Guo, Tom Lane
Discussion: https://postgr.es/m/CAApHDvpHzfo92%3DR4W0%2BxVua3BUYCKMckWAmo-2t_KiXN-wYH%3Dw%40mail.gmail.com
|
|
The general convention in the executor is to refer to child plans
and planstates via the outerPlan[State] and innerPlan[State]
macros, but a few places didn't do it like that. For consistency
and readability, convert all the stragglers to use the macros.
(See also commit 40f42d2a3, which did some similar cleanup a few
years ago, but missed these cases.)
Richard Guo
Discussion: https://postgr.es/m/CAMbWs4-vYhh1xsa_veah4PUed2Xq=Ed_YH3=Mqt5A3Y=EgfCEg@mail.gmail.com
|
|
Like commit c9d297751959.
|
|
These are useless and distracting. We wouldn't have written the code
with them to begin with, so there's no reason to keep them.
Author: Justin Pryzby <[email protected]>
Discussion: https://postgr.es/m/[email protected]
Discussion: https://postgr.es/m/attachment/133167/0016-Extraneous-blank-lines.patch
|
|
This replaces the bool flag for randomAccess. An upcoming patch requires
adding another option, so instead of breaking the API for that, then
breaking it again one day if we add more options, let's just break it
once. Any boolean options we add in the future will just make use of an
unused bit in the flags.
Any extensions making use of tuplesorts will need to update their code
to pass TUPLESORT_RANDOMACCESS instead of true for randomAccess.
TUPLESORT_NONE can be used for a set of empty options.
Author: David Rowley
Reviewed-by: Justin Pryzby
Discussion: https://postgr.es/m/CAApHDvoH4ASzsAOyHcxkuY01Qf%2B%2B8JJ0paw%2B03dk%2BW25tQEcNQ%40mail.gmail.com
|
|
Backpatch-through: 10
|
|
In the same spirit as 6301c3ada, fix some more places where we were
using list_delete_first() in a loop and thereby risking O(N^2)
behavior. It's not clear that the lists manipulated in these spots
can get long enough to be really problematic ... but it's not clear
that they can't, either, and the fixes are simple enough.
As before, back-patch to v13.
Discussion: https://postgr.es/m/[email protected]
|
|
All the tape functions, like LogicalTapeRead and LogicalTapeWrite, now
take a LogicalTape as argument, instead of LogicalTapeSet+tape number.
You can create any number of LogicalTapes in a single LogicalTapeSet, and
you don't need to decide the number upfront, when you create the tape set.
This makes the tape management in hash agg spilling in nodeAgg.c simpler.
Discussion: https://www.postgresql.org/message-id/420a0ec7-602c-d406-1e75-1ef7ddc58d83%40iki.fi
Reviewed-by: Peter Geoghegan, Zhihong Yu, John Naylor
|
|
The point of introducing the hash_mem_multiplier GUC was to let users
reproduce the old behavior of hash aggregation, i.e. that it could use
more than work_mem at need. However, the implementation failed to get
the job done on Win64, where work_mem is clamped to 2GB to protect
various places that calculate memory sizes using "long int". As
written, the same clamp was applied to hash_mem. This resulted in
severe performance regressions for queries requiring a bit more than
2GB for hash aggregation, as they now spill to disk and there's no
way to stop that.
Getting rid of the work_mem restriction seems like a good idea, but
it's a big job and could not conceivably be back-patched. However,
there's only a fairly small number of places that are concerned with
the hash_mem value, and it turns out to be possible to remove the
restriction there without too much code churn or any ABI breaks.
So, let's do that for now to fix the regression, and leave the
larger task for another day.
This patch does introduce a bit more infrastructure that should help
with the larger task, namely pg_bitutils.h support for working with
size_t values.
Per gripe from Laurent Hasson. Back-patch to v13 where the
behavior change came in.
Discussion: https://postgr.es/m/[email protected]
Discussion: https://postgr.es/m/MN2PR15MB25601E80A9B6D1BA6F592B1985E39@MN2PR15MB2560.namprd15.prod.outlook.com
|
|
Here we alter the code that calls build_pertrans_for_aggref() so that the
function no longer needs to special-case whether it's dealing with an
aggtransfn or an aggcombinefn. This allows us to reuse the
build_aggregate_transfn_expr() function and just get rid of the
build_aggregate_combinefn_expr() completely.
All of the special case code that was in build_pertrans_for_aggref() has
been moved up to the calling functions.
This saves about a dozen lines of code in nodeAgg.c and a few dozen more
in parse_agg.c
Also, rename a few variables in nodeAgg.c to try to make it more clear
that we're working with either a aggtransfn or an aggcombinefn. Some of
the old names would have you believe that we were always working with an
aggtransfn.
Discussion: https://postgr.es/m/CAApHDvptMQ9FmF0D67zC_w88yVnoNVR2+kkOQGUrCmdxWxLULQ@mail.gmail.com
|
|
Also "make reformat-dat-files".
The only change worthy of note is that pgindent messed up the formatting
of launcher.c's struct LogicalRepWorkerId, which led me to notice that
that struct wasn't used at all anymore, so I just took it out.
|
|
The portions fixing the documentation are backpatched where needed.
Author: Justin Pryzby
Discussion: https://postgr.es/m/[email protected]
backpatch-through: 9.6
|
|
Commit 230230223 taught nodeAgg.c that, when spilling tuples from
memory in an oversized hash aggregation, it only needed to spill
input columns referenced in the node's tlist and quals. Unfortunately,
that's wrong: we also have to save the grouping columns. The error
is masked in common cases because the grouping columns also appear
in the tlist, but that's not necessarily true. The main category
of plans where it's not true seem to come from semijoins ("WHERE
outercol IN (SELECT innercol FROM innertable)") where the innercol
needs an implicit promotion to make it comparable to the outercol.
The grouping column will be "innercol::promotedtype", but that
expression appears nowhere in the Agg node's own tlist and quals;
only the bare "innercol" is found in the tlist.
I spent quite a bit of time looking for a suitable regression test
case for this, without much success. If the number of distinct
values of the innercol is large enough to make spilling happen,
the planner tends to prefer a non-HashAgg plan, at least for
problem sizes that are reasonable to use in the regression tests.
So, no new regression test. However, this patch does demonstrably
fix the originally-reported test case.
Per report from s.p.e (at) gmx-topmail.de. Backpatch to v13
where the troublesome code came in.
Discussion: https://postgr.es/m/trinity-1c565d44-159f-488b-a518-caf13883134f-1611835701633@3c-app-gmx-bap78
|
|
Backpatch-through: 9.5
|
|
Before processing tuples, agg_refill_hash_table() was setting all
pergroup pointers to NULL to signal to advance_aggregates() that it
should not attempt to advance groups that had spilled.
The problem was that it also set the pergroups for sorted grouping
sets to NULL, which caused rescanning to fail.
Instead, change agg_refill_hash_table() to only set the pergroups for
hashed grouping sets to NULL; and when compiling the expression, pass
doSort=false.
Reported-by: Alexander Lakhin
Discussion: https://postgr.es/m/16784-7ff169bf2c3d1588%40postgresql.org
Backpatch-through: 13
|
