| Age | Commit message (Collapse) | Author |
|---|
|
What we want in these places is "xmlChar *volatile ptr",
not "volatile xmlChar *ptr". The former means that the
pointer variable itself needs to be treated as volatile,
while the latter says that what it points to is volatile.
Since the point here is to ensure that the pointer variables
don't go crazy after a longjmp, it's the former semantics
that we need. The misplacement of "volatile" also led
to needing to cast away volatile in some places.
Also fix a number of places where variables that are assigned to
within a PG_TRY and then used after it were not initialized or
not marked as volatile. (A few buildfarm members were issuing
"may be used uninitialized" warnings about some of these variables,
which is what drew my attention to this area.) In most cases
these variables were being set as the last step within the PG_TRY
block, which might mean that we could get away without the "volatile"
marking. But doing that seems unsafe and is definitely not per our
coding conventions.
These problems seem to have come in with 732061150, so no need
for back-patch.
|
|
The contrib module xml2/ has always been fuzzy with the cleanup of the
memory allocated by the calls internal to libxml2, even if there are
APIs in place giving a lot of control over the error behavior, all
located in the backend's xml.c.
The code paths fixed in the commit address multiple defects, while
sanitizing the code:
- In xpath.c, several allocations are done by libxml2 for
xpath_workspace, whose memory cleanup could go out of sight as it relied
on a single TRY/CATCH block done in pgxml_xpath(). workspace->res is
allocated by libxml2, and may finish by not being freed at all upon a
failure outside of a TRY area. This code is refactored so as the
TRY/CATCH block of pgxml_xpath() is moved one level higher to its
callers, which are responsible for cleaning up the contents of a
workspace on failure. cleanup_workspace() now requires a volatile
workspace, forcing as a rule that a TRY/CATCH block should be used.
- Several calls, like xmlStrdup(), xmlXPathNewContext(),
xmlXPathCtxtCompile(), etc. can return NULL on failures (for most of
them allocation failures. These forgot to check for failures, or missed
that pg_xml_error_occurred() should be called, to check if an error is
already on the stack.
- Some memory allocated by libxml2 calls was freed in an incorrect way,
"resstr" in xslt_process() being one example.
The class of errors fixed here are for problems that are unlikely going
to happen in practice, so no backpatch is done. The changes have
finished by being rather invasive, so it is perhaps not a bad thing to
be conservative and to keep these changes only on HEAD anyway.
Author: Michael Paquier <[email protected]>
Reported-by: Karavaev Alexey <[email protected]>
Reviewed-by: Jim Jones <[email protected]>
Reviewed-by: Tom Lane <[email protected]>
Discussion: https://postgr.es/m/[email protected]
|
|
as determined by IWYU
Similar to commit dbbca2cf299, but for contrib, pl, and src/test/.
Reviewed-by: Alvaro Herrera <[email protected]>
Discussion: https://www.postgresql.org/message-id/flat/0df1d5b1-8ca8-4f84-93be-121081bde049%40eisentraut.org
|
|
When our XML-handling modules were first written, the SQL standard
lacked any error codes that were particularly intended for XML
error conditions. Unsurprisingly, this led to some rather random
choices of errcodes in those modules. Now the standard has a whole
SQLSTATE class, "Class 10 - XQuery Error", with a reasonably large
selection of relevant-looking errcodes.
In this patch I've chosen one fairly generic code defined by the
standard, 10608 = invalid_argument_for_xquery, and used it where
it seemed appropriate. I've also made an effort to replace
ERRCODE_INTERNAL_ERROR everywhere it was not clearly reporting
a coding problem; in particular, many of the existing uses look
like they can fairly be reported as ERRCODE_OUT_OF_MEMORY.
It might be interesting to try to map libxml2's error codes into
the standard's new collection, but I've not undertaken that here.
Discussion: https://postgr.es/m/[email protected]
|
|
This reverts commit 2197d06224a1, following a discussion over a Coverity
report where issues like the "Billion laugh attack" could cause the
backend to waste CPU and memory even if a client applied checks on the
size of the data given in input, and libxml2 does not offer guarantees
that input limits are respected under XML_PARSE_HUGE.
Discussion: https://postgr.es/m/[email protected]
|
|
This commit adds XML_PARSE_HUGE to the libxml2 functions used in core
for the parsing of XML objects, raising up the original limit of 10MB
supported by libxml2.
In most code paths of upstream, XML_MAX_TEXT_LENGTH (10^7) is the
historical limit that gets upgraded to XML_MAX_HUGE_LENGTH (10^9) once
XML_PARSE_HUGE is given to the parser calls. These are still limited by
any palloc() calls for text, up to 1GB.
This offers the possibility to handle within the backend XML objects
larger than 10MB in general, with also a higher depth limit. This
change affects the contrib module xml2, the xml data type and SQL/XML.
Author: Dmitry Koval
Reviewed-by: Tom Lane, Michael Paquier
Discussion: https://postgr.es/m/[email protected]
|
|
Some functions are used in the tree and are currently marked as
deprecated by upstream. This commit refreshes the code to use the
recommended functions, leading to the following changes:
- xmlSubstituteEntitiesDefault() is gone, and needs to be replaced with
XML_PARSE_NOENT for the paths doing the parsing.
- xmlParseMemory() -> xmlReadMemory().
These functions, as well as more functions setting global states, have
been officially marked as deprecated by upstream in August 2022. Their
replacements exist since the 2001-ish area, as far as I have checked,
so that should be safe.
Author: Dmitry Koval
Discussion: https://postgr.es/m/[email protected]
|
|
Don't move parenthesized lines to the left, even if that means they
flow past the right margin.
By default, BSD indent lines up statement continuation lines that are
within parentheses so that they start just to the right of the preceding
left parenthesis. However, traditionally, if that resulted in the
continuation line extending to the right of the desired right margin,
then indent would push it left just far enough to not overrun the margin,
if it could do so without making the continuation line start to the left of
the current statement indent. That makes for a weird mix of indentations
unless one has been completely rigid about never violating the 80-column
limit.
This behavior has been pretty universally panned by Postgres developers.
Hence, disable it with indent's new -lpl switch, so that parenthesized
lines are always lined up with the preceding left paren.
This patch is much less interesting than the first round of indent
changes, but also bulkier, so I thought it best to separate the effects.
Discussion: https://postgr.es/m/[email protected]
Discussion: https://postgr.es/m/[email protected]
|
|
Change pg_bsd_indent to follow upstream rules for placement of comments
to the right of code, and remove pgindent hack that caused comments
following #endif to not obey the general rule.
Commit e3860ffa4dd0dad0dd9eea4be9cc1412373a8c89 wasn't actually using
the published version of pg_bsd_indent, but a hacked-up version that
tried to minimize the amount of movement of comments to the right of
code. The situation of interest is where such a comment has to be
moved to the right of its default placement at column 33 because there's
code there. BSD indent has always moved right in units of tab stops
in such cases --- but in the previous incarnation, indent was working
in 8-space tab stops, while now it knows we use 4-space tabs. So the
net result is that in about half the cases, such comments are placed
one tab stop left of before. This is better all around: it leaves
more room on the line for comment text, and it means that in such
cases the comment uniformly starts at the next 4-space tab stop after
the code, rather than sometimes one and sometimes two tabs after.
Also, ensure that comments following #endif are indented the same
as comments following other preprocessor commands such as #else.
That inconsistency turns out to have been self-inflicted damage
from a poorly-thought-through post-indent "fixup" in pgindent.
This patch is much less interesting than the first round of indent
changes, but also bulkier, so I thought it best to separate the effects.
Discussion: https://postgr.es/m/[email protected]
Discussion: https://postgr.es/m/[email protected]
|
|
This makes almost all core code follow the policy introduced in the
previous commit. Specific decisions:
- Text search support functions with char* and length arguments, such as
prsstart and lexize, may receive unaligned strings. I doubt
maintainers of non-core text search code will notice.
- Use plain VARDATA() on values detoasted or synthesized earlier in the
same function. Use VARDATA_ANY() on varlenas sourced outside the
function, even if they happen to always have four-byte headers. As an
exception, retain the universal practice of using VARDATA() on return
values of SendFunctionCall().
- Retain PG_GETARG_BYTEA_P() in pageinspect. (Page images are too large
for a one-byte header, so this misses no optimization.) Sites that do
not call get_page_from_raw() typically need the four-byte alignment.
- For now, do not change btree_gist. Its use of four-byte headers in
memory is partly entangled with storage of 4-byte headers inside
GBT_VARKEY, on disk.
- For now, do not change gtrgm_consistent() or gtrgm_distance(). They
incorporate the varlena header into a cache, and there are multiple
credible implementation strategies to consider.
|
|
Mark Simonetti reported that libxslt sometimes crashes for him, and that
swapping xslt_process's object-freeing calls around to do them in reverse
order of creation seemed to fix it. I've not reproduced the crash, but
valgrind clearly shows a reference to already-freed memory, which is
consistent with the idea that shutdown of the xsltTransformContext is
trying to reference the already-freed stylesheet or input document.
With this patch, valgrind is no longer unhappy.
I have an inquiry in to see if this is a libxslt bug or if we're just
abusing the library; but even if it's a library bug, we'd want to adjust
our code so it doesn't fail with unpatched libraries.
Back-patch to all supported branches, because we've been doing this in
the wrong(?) order for a long time.
|
|
Because of gcc -Wmissing-prototypes, all functions in dynamically
loadable modules must have a separate prototype declaration. This is
meant to detect global functions that are not declared in header files,
but in cases where the function is called via dfmgr, this is redundant.
Besides filling up space with boilerplate, this is a frequent source of
compiler warnings in extension modules.
We can fix that by creating the function prototype as part of the
PG_FUNCTION_INFO_V1 macro, which such modules have to use anyway. That
makes the code of modules cleaner, because there is one less place where
the entry points have to be listed, and creates an additional check that
functions have the right prototype.
Remove now redundant prototypes from contrib and other modules.
|
|
libxslt offers the ability to read and write both files and URLs through
stylesheet commands, thus allowing unprivileged database users to both read
and write data with the privileges of the database server. Disable that
through proper use of libxslt's security options.
Also, remove xslt_process()'s ability to fetch documents and stylesheets
from external files/URLs. While this was a documented "feature", it was
long regarded as a terrible idea. The fix for CVE-2012-3489 broke that
capability, and rather than expend effort on trying to fix it, we're just
going to summarily remove it.
While the ability to write as well as read makes this security hole
considerably worse than CVE-2012-3489, the problem is mitigated by the fact
that xslt_process() is not available unless contrib/xml2 is installed,
and the longstanding warnings about security risks from that should have
discouraged prudent DBAs from installing it in security-exposed databases.
Reported and fixed by Peter Eisentraut.
Security: CVE-2012-3488
|
|
commit-fest.
|
|
It failed to check for error return from xsltApplyStylesheet(), as reported
by Peter Gagarinov. (So far as I can tell, libxslt provides no convenient
way to get a useful error message in failure cases. There might be some
inconvenient way, but considering that this code is deprecated it's hard to
get enthusiastic about putting lots of work into it. So I just made it say
"failed to apply stylesheet", in line with the existing error checks.)
While looking at the code I also noticed that the string returned by
xsltSaveResultToString was never freed, resulting in a session-lifespan
memory leak.
Back-patch to all supported versions.
|
|
libxml reports some errors (like invalid xmlns attributes) via the error
handler hook, but still returns a success indicator to the library caller.
This causes us to miss some errors that are important to report. Since the
"generic" error handler hook doesn't know whether the message it's getting
is for an error, warning, or notice, stop using that and instead start
using the "structured" error handler hook, which gets enough information
to be useful.
While at it, arrange to save and restore the error handler hook setting in
each libxml-using function, rather than assuming we can set and forget the
hook. This should improve the odds of working nicely with third-party
libraries that also use libxml.
In passing, volatile-ize some local variables that get modified within
PG_TRY blocks. I noticed this while testing with an older gcc version
than I'd previously tried to compile xml.c with.
Florian Pflug and Tom Lane, with extensive review/testing by Noah Misch
|
|
|
|
|
|
pairs that can be handled by xslt_process().
There is much else to do here, but this patch seems useful in its own right
for as long as this code survives.
Pavel Stehule, reviewed by Mike Fowler
|
|
|
|
in versions >= 8.3). The core code is more robust and efficient than what
was there before, and this also reduces risks involved in swapping different
libxml error handler settings.
Before 8.3, there is still some risk of problems if add-on modules such as
Perl invoke libxml without setting their own error handler. Given the lack
of reports I'm not sure there's a risk in practice, so I didn't take the
step of actually duplicating the core code into older contrib/xml2 branches.
Instead I just tweaked the existing code to ensure it didn't leave a dangling
pointer to short-lived memory when throwing an error.
|
|
This involves modifying the module to have a stable ABI, that is, the
xslt_process() function still exists even without libxslt. It throws a
runtime error if called, but doesn't prevent executing the CREATE FUNCTION
call. This is a good thing anyway to simplify cross-version upgrades.
|
|
These are unnecessary and probably dangerous. I don't see any immediate
risk situations in the core XML support or contrib/xml2 itself, but there
could be issues with external uses of libxml2, and in any case it's an
accident waiting to happen.
|
|
just make it a bit less ugly in places.
|
|
last pair of parameter name/value strings, even when there are MAXPARAMS
of them. Aboriginal bug in contrib/xml2, noted while studying bug #4912
(though I'm not sure whether there's something else involved in that
report).
This might be thought a security issue, since it's a potential backend
crash; but considering that untrustworthy users shouldn't be allowed
to get their hands on xslt_process() anyway, it's probably not worth
getting excited about.
|
|
provided by Andrew.
|
|
not include postgres.h nor anything else it doesn't directly need. Add
#includes to calling files as needed to compensate. Per my proposal of
yesterday.
This should be noted as a source code change in the 8.4 release notes,
since it's likely to require changes in add-on modules.
|
|
This particular batch was just for *.c and *.h file.
The changes were made with the following 2 commands:
find . \( \( -name 'libstemmer' -o -name 'expected' -o -name 'ppport.h' \) -prune \) -o \( -name '*.[ch]' \) \( -exec grep -q '\$PostgreSQL' {} \; -o -print \) | while read file ; do head -n 1 < $file | grep -q '^/\*' && echo $file; done | xargs -l sed -i -e '1s/^\// /' -e '1i/*\n * $PostgreSQL:$ \n *'
find . \( \( -name 'libstemmer' -o -name 'expected' -o -name 'ppport.h' \) -prune \) -o \( -name '*.[ch]' \) \( -exec grep -q '\$PostgreSQL' {} \; -o -print \) | xargs -l sed -i -e '1i/*\n * $PostgreSQL:$ \n */'
|
|
auto-configure properly for libxslt present or not.
|
|
These changes assume that the varchar and xml data types are represented
the same as text. (I did not, however, accept the portions of the proposed
patch that wanted to assume bytea is the same as text --- tgl.)
Brendan Jurd
|
|
strings. This patch introduces four support functions cstring_to_text,
cstring_to_text_with_len, text_to_cstring, and text_to_cstring_buffer, and
two macros CStringGetTextDatum and TextDatumGetCString. A number of
existing macros that provided variants on these themes were removed.
Most of the places that need to make such conversions now require just one
function or macro call, in place of the multiple notational layers that used
to be needed. There are no longer any direct calls of textout or textin,
and we got most of the places that were using handmade conversions via
memcpy (there may be a few still lurking, though).
This commit doesn't make any serious effort to eliminate transient memory
leaks caused by detoasting toasted text objects before they reach
text_to_cstring. We changed PG_GETARG_TEXT_P to PG_GETARG_TEXT_PP in a few
places where it was easy, but much more could be done.
Brendan Jurd and Tom Lane
|
|
|
|
Get rid of VARATT_SIZE and VARATT_DATA, which were simply redundant with
VARSIZE and VARDATA, and as a consequence almost no code was using the
longer names. Rename the length fields of struct varlena and various
derived structures to catch anyplace that was accessing them directly;
and clean up various places so caught. In itself this patch doesn't
change any behavior at all, but it is necessary infrastructure if we hope
to play any games with the representation of varlena headers.
Greg Stark and Tom Lane
|
|
|
|
in every shared library.
|
|
more compliant with the error message style guide. In particular,
errdetail should begin with a capital letter and end with a period,
whereas errmsg should not. I also fixed a few related issues in
passing, such as fixing the repeated misspelling of "lexeme" in
contrib/tsearch2 (per Tom's suggestion).
|
|
|
|
|
|
|
|
|
