| Age | Commit message (Collapse) | Author |
|---|
|
Backpatch-through: 11
|
|
Discussion: https://postgr.es/m/[email protected]
|
|
Because we added StaticAssertStmt() first before StaticAssertDecl(),
some uses as well as the instructions in c.h are now a bit backwards
from the "native" way static assertions are meant to be used in C.
This updates the guidance and moves some static assertions to better
places.
Specifically, since the addition of StaticAssertDecl(), we can put
static assertions at the file level. This moves a number of static
assertions out of function bodies, where they might have been stuck
out of necessity, to perhaps better places at the file level or in
header files.
Also, when the static assertion appears in a position where a
declaration is allowed, then using StaticAssertDecl() is more native
than StaticAssertStmt().
Reviewed-by: John Naylor <[email protected]>
Discussion: https://www.postgresql.org/message-id/flat/941a04e7-dd6f-c0e4-8cdf-a33b3338cbda%40enterprisedb.com
|
|
Commit 9abb2bfc left behind code to block signals inside signal
handlers on Windows, because our signal porting layer didn't have
sigaction(). Provide a minimal implementation that is capable of
blocking signals, to get rid of platform differences. See also related
commit c94ae9d8.
Discussion: https://postgr.es/m/CA%2BhUKGKKKfcgx6jzok9AYenp2TNti_tfs8FMoJpL8%2B0Gsy%3D%3D_A%40mail.gmail.com
|
|
Autoconf is showing its age, fewer and fewer contributors know how to wrangle
it. Recursive make has a lot of hard to resolve dependency issues and slow
incremental rebuilds. Our home-grown MSVC build system is hard to maintain for
developers not using Windows and runs tests serially. While these and other
issues could individually be addressed with incremental improvements, together
they seem best addressed by moving to a more modern build system.
After evaluating different build system choices, we chose to use meson, to a
good degree based on the adoption by other open source projects.
We decided that it's more realistic to commit a relatively early version of
the new build system and mature it in tree.
This commit adds an initial version of a meson based build system. It supports
building postgres on at least AIX, FreeBSD, Linux, macOS, NetBSD, OpenBSD,
Solaris and Windows (however only gcc is supported on aix, solaris). For
Windows/MSVC postgres can now be built with ninja (faster, particularly for
incremental builds) and msbuild (supporting the visual studio GUI, but
building slower).
Several aspects (e.g. Windows rc file generation, PGXS compatibility, LLVM
bitcode generation, documentation adjustments) are done in subsequent commits
requiring further review. Other aspects (e.g. not installing test-only
extensions) are not yet addressed.
When building on Windows with msbuild, builds are slower when using a visual
studio version older than 2019, because those versions do not support
MultiToolTask, required by meson for intra-target parallelism.
The plan is to remove the MSVC specific build system in src/tools/msvc soon
after reaching feature parity. However, we're not planning to remove the
autoconf/make build system in the near future. Likely we're going to keep at
least the parts required for PGXS to keep working around until all supported
versions build with meson.
Some initial help for postgres developers is at
https://wiki.postgresql.org/wiki/Meson
With contributions from Thomas Munro, John Naylor, Stone Tickle and others.
Author: Andres Freund <[email protected]>
Author: Nazir Bilal Yavuz <[email protected]>
Author: Peter Eisentraut <[email protected]>
Reviewed-By: Peter Eisentraut <[email protected]>
Discussion: https://postgr.es/m/[email protected]
|
|
Since Windows 10 1703, it is additionally necessary to pass a flag
called FILE_MAP_LARGE_PAGES to MapViewOfFile() to enable large pages at
map time. This flag is ignored on older versions of Windows, where
large pages should still be able to work properly without setting it.
Note that the flag would be set only for binaries that knew about it at
compile-time, which should be more or less all the Windows environments
these days.
Since 495ed0e, Windows 10 is the minimum version of Windows supported by
Postgres, making this change easy to reason about on HEAD. Per
discussion, no backpatch is done for the moment.
Reported-by: Okano Naoki
Author: Thomas Munro
Reviewed-by: Tom Lane, Michael Paquier, Julien Rouhaud
Discussion: https://postgr.es/m/[email protected]
|
|
guc.c has grown to be one of our largest .c files, making it
a bottleneck for compilation. It's also acquired a bunch of
knowledge that'd be better kept elsewhere, because of our not
very good habit of putting variable-specific check hooks here.
Hence, split it up along these lines:
* guc.c itself retains just the core GUC housekeeping mechanisms.
* New file guc_funcs.c contains the SET/SHOW interfaces and some
SQL-accessible functions for GUC manipulation.
* New file guc_tables.c contains the data arrays that define the
built-in GUC variables, along with some already-exported constant
tables.
* GUC check/assign/show hook functions are moved to the variable's
home module, whenever that's clearly identifiable. A few hard-
to-classify hooks ended up in commands/variable.c, which was
already a home for miscellaneous GUC hook functions.
To avoid cluttering a lot more header files with #include "guc.h",
I also invented a new header file utils/guc_hooks.h and put all
the GUC hook functions' declarations there, regardless of their
originating module. That allowed removal of #include "guc.h"
from some existing headers. The fallout from that (hopefully
all caught here) demonstrates clearly why such inclusions are
best minimized: there are a lot of files that, for example,
were getting array.h at two or more levels of remove, despite
not having any connection at all to GUCs in themselves.
There is some very minor code beautification here, such as
renaming a couple of inconsistently-named hook functions
and improving some comments. But mostly this just moves
code from point A to point B and deals with the ensuing
needs for #include adjustments and exporting a few functions
that previously weren't exported.
Patch by me, per a suggestion from Andres Freund; thanks also
to Michael Paquier for the idea to invent guc_funcs.c.
Discussion: https://postgr.es/m/[email protected]
|
|
All the code and comments cleaned up here is irrelevant since 495ed0e.
Note that this removes an assumption that CreateRestrictedToken() may
not exist, something that could have happened when running under Windows
NT as the code stated. Rather than assuming that it may not exist, this
causes pg_ctl to fail hard if the function cannot be loaded.
Reported-by: Justin Pryzby
Discussion: https://postgr.es/m/[email protected]
|
|
These are in SUSv2 and every targeted Unix system has them. It's not
hard to avoid including them on Windows system because they're mostly
used in platform-specific translation units.
Reviewed-by: Tom Lane <[email protected]>
Discussion: https://postgr.es/m/CA%2BhUKG%2BL_3brvh%3D8e0BW_VfX9h7MtwgN%3DnFHP5o7X2oZucY9dg%40mail.gmail.com
|
|
We've relied on it being present for msvc for ages...
Reviewed-By: Thomas Munro <[email protected]>
Discussion: https://postgr.es/m/[email protected]
|
|
Since commit a65e0864, we've required Unix systems to have
sigprocmask(). As noted in that commit's message, we were still
emulating the historical pre-standard sigsetmask() function in our
Windows support code. Emulate standard sigprocmask() instead, for
consistency.
The PG_SETMASK() abstraction is now redundant and all calls could in
theory be replaced by plain sigprocmask() calls, but that isn't done by
this commit.
Reviewed-by: Tom Lane <[email protected]>
Discussion: https://postgr.es/m/3153247.1657834482%40sss.pgh.pa.us
|
|
HP-UX hardware is no longer produced, build farm coverage recently
ended, and there are no known active maintainers targeting this OS.
Since there is a major rewrite of the build system in the pipeline for
PostgreSQL 16, and that requires development, testing and maintainance
for each OS and tool chain, it seems like a good time to drop support
for:
* HP-UX, the operating system.
* HP aCC, the HP-UX native compiler.
Reviewed-by: Tom Lane <[email protected]>
Reviewed-by: Andres Freund <[email protected]>
Reviewed-by: Peter Eisentraut <[email protected]>
Discussion: https://postgr.es/m/1415825.1656893299%40sss.pgh.pa.us
|
|
Our gcc-on-Solaris buildfarm members emit "incompatible pointer type"
warnings in places where it's not. This is a bit odd, since AFAICT
Solaris follows the POSIX spec in declaring shmdt's argument as
"const void *", and you'd think any pointer argument would satisfy that.
But whatever. Part of a general push to remove off-the-beaten-track
warnings where we can easily do so.
|
|
Backpatch-through: 10
|
|
1. Update our open() wrapper to check for NT's STATUS_DELETE_PENDING
and translate it to Unix-like errors. This is done with
RtlGetLastNtStatus(), which is dynamically loaded from ntdll. A new
file win32ntdll.c centralizes lookup of NT functions, in case we decide
to add more in the future.
2. Remove non-working code that was trying to do something similar for
stat(), and just reuse the open() wrapper code. As a side effect,
stat() also gains resilience against "sharing violation" errors.
3. Since stat() is used very early in process startup, remove the
requirement that the Win32 signal event has been created before
pgwin32_open_handle() is reached. Instead, teach pg_usleep() to fall
back to a non-interruptible sleep if reached before the signal event is
available.
This could be back-patched, but for now it's in master only. The
problem has apparently been with us for a long time and generated only a
few complaints. Proposed patches trigger it more often, which led to
this investigation and fix.
Reviewed-by: Andres Freund <[email protected]>
Reviewed-by: Alexander Lakhin <[email protected]>
Reviewed-by: Juan José SantamarÃa Flecha <[email protected]>
Discussion: https://postgr.es/m/CA%2BhUKGJz_pZTF9mckn6XgSv69%2BjGwdgLkxZ6b3NWGLBCVjqUZA%40mail.gmail.com
|
|
Since 8162464a25e we do so in win32_port.h. But it likely didn't do much
before that either, because at that point windows.h was already included via
win32_port.h.
Reported-By: Tom Lane
Discussion: https://postgr.es/m/[email protected]
|
|
It doesn't work (it could, but hasn't been implemented).
Back-patch to 12, where shared_memory_type arrived.
Reported-by: Alexander Lakhin <[email protected]>
Reviewed-by: Alexander Lakhin <[email protected]>
Discussion: https://postgr.es/m/[email protected]
|
|
Add ETIMEDOUT to ALL_CONNECTION_FAILURE_ERRNOS' list of "errnos that
identify hard failure of a previously-established network connection".
While one could imagine that this is sometimes recoverable, the same
could be said of other entries such as ENETDOWN.
In support of this, handle ETIMEDOUT on par with other socket errors
in relevant infrastructure, such as TranslateSocketError().
(I made a couple of cosmetic adjustments in TranslateSocketError(),
too.) The code now assumes that ETIMEDOUT is defined everywhere,
which it should be given that POSIX has required it since SUSv2.
Perhaps this should be back-patched, but I'm hesitant to do so given
the lack of previous complaints, and the hazard that there's a small
ABI break on Windows from redefining the symbol. Even if we decide
to do that, it'd be prudent to let this bake awhile in HEAD first.
Jelte Fennema
Discussion: https://postgr.es/m/AM5PR83MB01782BFF2978505F6D6C559AF7AA9@AM5PR83MB0178.EURPRD83.prod.outlook.com
|
|
This runtime-computed GUC shows the number of huge pages required
for the server's main shared memory area, taking advantage of the
work done in 0c39c29 and 0bd305e. This is useful for users to estimate
the amount of huge pages required for a server as it becomes possible to
do an estimation without having to start the server and potentially
allocate a large chunk of shared memory.
The number of huge pages is calculated based on the existing GUC
huge_page_size if set, or by using the system's default by looking at
/proc/meminfo on Linux. There is nothing new here as this commit reuses
the existing calculation methods, and just exposes this information
directly to the user. The routine calculating the huge page size is
refactored to limit the number of files with platform-specific flags.
This new GUC's name was the most popular choice based on the discussion
done. This is only supported on Linux.
I have taken the time to test the change on Linux, Windows and MacOS,
though for the last two ones large pages are not supported. The first
one calculates correctly the number of pages depending on the existing
GUC huge_page_size or the system's default.
Thanks to Andres Freund, Robert Haas, Kyotaro Horiguchi, Tom Lane,
Justin Pryzby (and anybody forgotten here) for the discussion.
Author: Nathan Bossart
Discussion: https://postgr.es/m/[email protected]
|
|
It's hard to disable ASLR on current macOS releases, for testing with
-DEXEC_BACKEND. You could already set the environment variable
PG_SHMEM_ADDR to something not likely to collide with mappings created
earlier in process startup. Let's also provide a default value that
works on current releases and architectures, for developer convenience.
As noted in the pre-existing comment, this is a horrible hack, but
-DEXEC_BACKEND is only used by Unix-based PostgreSQL developers for
testing some otherwise Windows-only code paths, so it seems excusable.
Back-patch to all supported branches.
Reviewed-by: Tom Lane <[email protected]>
Discussion: https://postgr.es/m/20210806032944.m4tz7j2w47mant26%40alap3.anarazel.de
|
|
Also "make reformat-dat-files".
The only change worthy of note is that pgindent messed up the formatting
of launcher.c's struct LogicalRepWorkerId, which led me to notice that
that struct wasn't used at all anymore, so I just took it out.
|
|
Some code thought this was unsigned, but it's signed int.
|
|
An inconsistent set of debug-level messages was not using
errmsg_internal(), thus uselessly exposing the messages to translation
work. Fix those.
|
|
In the error messages referring to the user right "Lock pages in
memory", this is a term from the Windows OS, so it should be
translated in accordance with the OS localization. Refactor the error
messages so this is easier and clearer. Also fix the capitalization
to match the existing capitalization in the OS.
|
|
Backpatch-through: 9.5
|
|
After de8feb1f3a23465b5737e8a8c160e8ca62f61339, some warnings remained
that were only visible when using GCC on Windows. Fix those as well.
Note that the ecpg test source files don't use the full pg_config.h,
so we can't use pg_funcptr_t there but have to do it the long way.
|
|
Up to now, only ECONNRESET (and EPIPE, in most but not quite all places)
received special treatment in our error handling logic. This patch
changes things so that related error codes such as ECONNABORTED are
also recognized as indicating that the connection's dead and unlikely
to come back.
We continue to think, however, that only ECONNRESET and EPIPE should be
reported as probable server crashes; the other cases indicate network
connectivity problems but prove little about the server's state. Thus,
there's no change in the error message texts that are output for such
cases. The key practical effect is that errcode_for_socket_access()
will report ERRCODE_CONNECTION_FAILURE rather than
ERRCODE_INTERNAL_ERROR for a network failure. It's expected that this
will fix buildfarm member lorikeet's failures since commit 32a9c0bdf,
as that seems to be due to not treating ECONNABORTED equivalently to
ECONNRESET.
The set of errnos treated this way now includes ECONNABORTED, EHOSTDOWN,
EHOSTUNREACH, ENETDOWN, ENETRESET, and ENETUNREACH. Several of these
were second-class citizens in terms of their handling in places like
get_errno_symbol(), so upgrade the infrastructure where necessary.
As committed, this patch assumes that all these symbols are defined
everywhere. POSIX specifies all of them except EHOSTDOWN, but that
seems to exist on all platforms of interest; we'll see what the
buildfarm says about that.
Probably this should be back-patched, but let's see what the buildfarm
thinks of it first.
Fujii Masao and Tom Lane
Discussion: https://postgr.es/m/[email protected]
|
|
This allows the huge page size to be set explicitly. The default is 0,
meaning it will use the system default, as before.
Author: Odin Ugedal <[email protected]>
Discussion: https://postgr.es/m/20200608154639.20254-1-odin%40ugedal.com
|
|
|
|
Backpatch-through: update all files in master, backpatch legal files through 9.4
|
|
Since its inception, our Windows signal emulation code has worked by
running a main signal thread that just watches for incoming signal
requests, and then spawns a new thread to handle each such request.
That design is meant for servers in which requests can take substantial
effort to process, and it's worth parallelizing the handling of
requests. But those assumptions are just bogus for our signal code.
It's not much more than pg_queue_signal(), which is cheap and can't
parallelize at all, plus we don't really expect lots of signals to
arrive at the same backend at once. More importantly, this approach
creates failure modes that we could do without: either inability to
spawn a new thread or inability to create a new pipe handle will risk
loss of signals. Hence, dispense with the separate per-signal threads
and just service each request in-line in the main signal thread. This
should be a bit faster (for the normal case of one signal at a time)
as well as more robust.
Patch by me; thanks to Andrew Dunstan for testing and Amit Kapila
for review.
Discussion: https://postgr.es/m/[email protected]
|
|
pg_signal_dispatch_thread() responded to the client (signal sender)
and disconnected the pipe before actually setting the shared variables
that make the signal visible to the backend process's main thread.
In the worst case, it seems, effective delivery of the signal could be
postponed for as long as the machine has any other work to do.
To fix, just move the pg_queue_signal() call so that we do it before
responding to the client. This essentially makes pgkill() synchronous,
which is a stronger guarantee than we have on Unix. That may be
overkill, but on the other hand we have not seen comparable timing bugs
on any Unix platform.
While at it, add some comments to this sadly underdocumented code.
Problem diagnosis and fix by Amit Kapila; I just added the comments.
Back-patch to all supported versions, as it appears that this can cause
visible NOTIFY timing oddities on all of them, and there might be
other misbehavior due to slow delivery of other signals.
Discussion: https://postgr.es/m/[email protected]
|
|
When maintaining or merging patches, one of the most common sources
for conflicts are the list of objects in makefiles. Especially when
the split across lines has been changed on both sides, which is
somewhat common due to attempting to stay below 80 columns, those
conflicts are unnecessarily laborious to resolve.
By splitting, and alphabetically sorting, OBJS style lines into one
object per line, conflicts should be less frequent, and easier to
resolve when they still occur.
Author: Andres Freund
Discussion: https://postgr.es/m/[email protected]
|
|
We believe that the issues that this was working around have been
fixed in MinGW more than 5 years ago, so this isn't necessary anymore.
Discussion: https://www.postgresql.org/message-id/flat/20190719050830.GK1859%40paquier.xyz
|
|
This approach provides a much tighter binding between a data directory
and the associated SysV shared memory block (and SysV or named-POSIX
semaphores, if we're using those). Key collisions are still possible,
but only between data directories stored on different filesystems,
so the situation should be negligible in practice. More importantly,
restarting the postmaster with a different port number no longer
risks failing to identify a relevant shared memory block, even when
postmaster.pid has been removed. A standalone backend is likewise
much more certain to detect conflicting leftover backends.
(In the longer term, we might now think about deprecating the port as
a cluster-wide value, so that one postmaster could support sockets
with varying port numbers. But that's for another day.)
The hazards fixed here apply only on Unix systems; our Windows code
paths already use identifiers derived from the data directory path
name rather than the port.
src/test/recovery/t/017_shm.pl, which intends to test key-collision
cases, has been substantially rewritten since it can no longer use
two postmasters with identical port numbers to trigger the case.
Instead, use Perl's IPC::SharedMem module to create a conflicting
shmem segment directly. The test script will be skipped if that
module is not available. (This means that some older buildfarm
members won't run it, but I don't think that that results in any
meaningful coverage loss.)
Patch by me; thanks to Noah Misch and Peter Eisentraut for discussion
and review.
Discussion: https://postgr.es/m/[email protected]
|
|
This fixes various typos in docs and comments, and removes some orphaned
definitions.
Author: Alexander Lakhin
Discussion: https://postgr.es/m/[email protected]
|
|
This addresses some issues with unnecessary code comments, fixes various
typos in docs and comments, and removes some orphaned structures and
definitions.
Author: Alexander Lakhin
Discussion: https://postgr.es/m/[email protected]
|
|
This is numbered take 7, and addresses a set of issues with code
comments, variable names and unreferenced variables.
Author: Alexander Lakhin
Discussion: https://postgr.es/m/[email protected]
|
|
|
|
Switch to 2.1 version of pg_bsd_indent. This formats
multiline function declarations "correctly", that is with
additional lines of parameter declarations indented to match
where the first line's left parenthesis is.
Discussion: https://postgr.es/m/CAEepm=0P3FeTXRcU5B2W3jv3PgRVZ-kGUXLGfd42FFhUROO3ug@mail.gmail.com
|
|
There's a very old race condition in our code to see whether a pre-existing
shared memory segment is still in use by a conflicting postmaster: it's
possible for the other postmaster to remove the segment in between our
shmctl() and shmat() calls. It's a narrow window, and there's no risk
unless both postmasters are using the same port number, but that's possible
during parallelized "make check" tests. (Note that while the TAP tests
take some pains to choose a randomized port number, pg_regress doesn't.)
If it does happen, we treated that as an unexpected case and errored out.
To fix, allow EINVAL to be treated as segment-not-present, and the same
for EIDRM on Linux. AFAICS, the considerations here are basically
identical to the checks for acceptable shmctl() failures, so I documented
and coded it that way.
While at it, adjust PGSharedMemoryAttach's API to remove its undocumented
dependency on UsedShmemSegAddr in favor of passing the attach address
explicitly. This makes it easier to be sure we're using a null shmaddr
when probing for segment conflicts (thus avoiding questions about what
EINVAL means). I don't think there was a bug there, but it required
fragile assumptions about the state of UsedShmemSegAddr during
PGSharedMemoryIsInUse.
Commit c09850992 may have made this failure more probable by applying
the conflicting-segment tests more often. Hence, back-patch to all
supported branches, as that was.
Discussion: https://postgr.es/m/[email protected]
|
|
postmaster startup scrutinizes any shared memory segment recorded in
postmaster.pid, exiting if that segment matches the current data
directory and has an attached process. When the postmaster.pid file was
missing, a starting postmaster used weaker checks. Change to use the
same checks in both scenarios. This increases the chance of a startup
failure, in lieu of data corruption, if the DBA does "kill -9 `head -n1
postmaster.pid` && rm postmaster.pid && pg_ctl -w start". A postmaster
will no longer stop if shmat() of an old segment fails with EACCES. A
postmaster will no longer recycle segments pertaining to other data
directories. That's good for production, but it's bad for integration
tests that crash a postmaster and immediately delete its data directory.
Such a test now leaks a segment indefinitely. No "make check-world"
test does that. win32_shmem.c already avoided all these problems. In
9.6 and later, enhance PostgresNode to facilitate testing. Back-patch
to 9.4 (all supported versions).
Reviewed (in earlier versions) by Daniel Gustafsson and Kyotaro HORIGUCHI.
Discussion: https://postgr.es/m/[email protected]
|
|
We've long had reports of intermittent "could not reattach to shared
memory" errors on Windows. Buildfarm member dory fails that way when
PGSharedMemoryReAttach() execution overlaps with creation of a thread
for the process's "default thread pool". Fix that by providing a second
region to receive asynchronous allocations that would otherwise intrude
into UsedShmemSegAddr. In pgwin32_ReserveSharedMemoryRegion(), stop
trying to free reservations landing at incorrect addresses; the caller's
next step has been to terminate the affected process. Back-patch to 9.4
(all supported versions).
Reviewed by Tom Lane. He also did much of the prerequisite research;
see commit bcbf2346d69f6006f126044864dd9383d50d87b4.
Discussion: https://postgr.es/m/[email protected]
|
|
This reverts commits 2f932f71d9f2963bbd201129d7b971c8f5f077fd,
16ee6eaf80a40007a138b60bb5661660058d0422 and
6f0e190056fe441f7cf788ff19b62b13c94f68f3. The buildfarm has revealed
several bugs. Back-patch like the original commits.
Discussion: https://postgr.es/m/[email protected]
|
|
Commit 2f932f71d9f2963bbd201129d7b971c8f5f077fd added code that elicits
a warning on buildfarm member flaviventris. Back-patch to 9.4, like
that commit.
Reported by Andres Freund.
Discussion: https://postgr.es/m/[email protected]
|
|
Before the pgwin32_signal_initialize() call, the backend version of
pg_usleep() has no effect. No in-tree code falls afoul of that today,
but temporary commit 23078689a9921968ac0873b017be6e7f772f10bc did so.
Discussion: https://postgr.es/m/[email protected]
|
|
postmaster startup scrutinizes any shared memory segment recorded in
postmaster.pid, exiting if that segment matches the current data
directory and has an attached process. When the postmaster.pid file was
missing, a starting postmaster used weaker checks. Change to use the
same checks in both scenarios. This increases the chance of a startup
failure, in lieu of data corruption, if the DBA does "kill -9 `head -n1
postmaster.pid` && rm postmaster.pid && pg_ctl -w start". A postmaster
will no longer recycle segments pertaining to other data directories.
That's good for production, but it's bad for integration tests that
crash a postmaster and immediately delete its data directory. Such a
test now leaks a segment indefinitely. No "make check-world" test does
that. win32_shmem.c already avoided all these problems. In 9.6 and
later, enhance PostgresNode to facilitate testing. Back-patch to 9.4
(all supported versions).
Reviewed by Daniel Gustafsson and Kyotaro HORIGUCHI.
Discussion: https://postgr.es/m/[email protected]
|
|
Since 9.3 we have used anonymous shared mmap for our main shared memory
region, except in EXEC_BACKEND builds. Provide a GUC so that users
can opt for System V shared memory once again, like in 9.2 and earlier.
A later patch proposes to add huge/large page support for AIX, which
requires System V shared memory and provided the motivation to revive
this possibility. It may also be useful on some BSDs.
Author: Andres Freund (revived and documented by Thomas Munro)
Discussion: https://postgr.es/m/HE1PR0202MB28126DB4E0B6621CC6A1A91286D90%40HE1PR0202MB2812.eurprd02.prod.outlook.com
Discussion: https://postgr.es/m/2AE143D2-87D3-4AD1-AC78-CE2258230C05%40FreeBSD.org
|
|
Backpatch-through: certain files through 9.4
|
|
Author: Daniel Gustafsson <[email protected]>
|
