| Age | Commit message (Collapse) | Author |
|---|
|
Don't move parenthesized lines to the left, even if that means they
flow past the right margin.
By default, BSD indent lines up statement continuation lines that are
within parentheses so that they start just to the right of the preceding
left parenthesis. However, traditionally, if that resulted in the
continuation line extending to the right of the desired right margin,
then indent would push it left just far enough to not overrun the margin,
if it could do so without making the continuation line start to the left of
the current statement indent. That makes for a weird mix of indentations
unless one has been completely rigid about never violating the 80-column
limit.
This behavior has been pretty universally panned by Postgres developers.
Hence, disable it with indent's new -lpl switch, so that parenthesized
lines are always lined up with the preceding left paren.
This patch is much less interesting than the first round of indent
changes, but also bulkier, so I thought it best to separate the effects.
Discussion: https://postgr.es/m/[email protected]
Discussion: https://postgr.es/m/[email protected]
|
|
Change pg_bsd_indent to follow upstream rules for placement of comments
to the right of code, and remove pgindent hack that caused comments
following #endif to not obey the general rule.
Commit e3860ffa4dd0dad0dd9eea4be9cc1412373a8c89 wasn't actually using
the published version of pg_bsd_indent, but a hacked-up version that
tried to minimize the amount of movement of comments to the right of
code. The situation of interest is where such a comment has to be
moved to the right of its default placement at column 33 because there's
code there. BSD indent has always moved right in units of tab stops
in such cases --- but in the previous incarnation, indent was working
in 8-space tab stops, while now it knows we use 4-space tabs. So the
net result is that in about half the cases, such comments are placed
one tab stop left of before. This is better all around: it leaves
more room on the line for comment text, and it means that in such
cases the comment uniformly starts at the next 4-space tab stop after
the code, rather than sometimes one and sometimes two tabs after.
Also, ensure that comments following #endif are indented the same
as comments following other preprocessor commands such as #else.
That inconsistency turns out to have been self-inflicted damage
from a poorly-thought-through post-indent "fixup" in pgindent.
This patch is much less interesting than the first round of indent
changes, but also bulkier, so I thought it best to separate the effects.
Discussion: https://postgr.es/m/[email protected]
Discussion: https://postgr.es/m/[email protected]
|
|
The new indent version includes numerous fixes thanks to Piotr Stefaniak.
The main changes visible in this commit are:
* Nicer formatting of function-pointer declarations.
* No longer unexpectedly removes spaces in expressions using casts,
sizeof, or offsetof.
* No longer wants to add a space in "struct structname *varname", as
well as some similar cases for const- or volatile-qualified pointers.
* Declarations using PG_USED_FOR_ASSERTS_ONLY are formatted more nicely.
* Fixes bug where comments following declarations were sometimes placed
with no space separating them from the code.
* Fixes some odd decisions for comments following case labels.
* Fixes some cases where comments following code were indented to less
than the expected column 33.
On the less good side, it now tends to put more whitespace around typedef
names that are not listed in typedefs.list. This might encourage us to
put more effort into typedef name collection; it's not really a bug in
indent itself.
There are more changes coming after this round, having to do with comment
indentation and alignment of lines appearing within parentheses. I wanted
to limit the size of the diffs to something that could be reviewed without
one's eyes completely glazing over, so it seemed better to split up the
changes as much as practical.
Discussion: https://postgr.es/m/[email protected]
Discussion: https://postgr.es/m/[email protected]
|
|
json_populate_record throws an error if asked to convert a JSON scalar
or array into a composite type. jsonb_populate_record was returning
a record full of NULL fields instead. It seems better to make it
throw an error for this case as well.
Nikita Glukhov
Discussion: https://postgr.es/m/[email protected]
|
|
The macro gave the wrong answers for a JsObject with is_json == 0:
it would return 1 if jsonb_cont == NULL, or if that wasn't NULL,
it would return 1 for any non-zero size.
We could fix that, but the only use of this macro at present is in the
JsObjectIsEmpty() macro, so it seems simpler and clearer to get rid of
JsObjectSize() and put corrected logic into JsObjectIsEmpty().
Thinko in commit cf35346e8, so no need for back-patch.
Nikita Glukhov
Discussion: https://postgr.es/m/[email protected]
|
|
This was evidently intended to match the struct's typedef name,
but it didn't quite. Noted while testing find_typedefs.
|
|
Different names were used between function declaration and definition.
|
|
perltidy run not included.
|
|
per buildfarm
|
|
With this change array fields are populated from json(b) arrays, and
composite fields are populated from json(b) objects.
Along the way, some significant code refactoring is done to remove
redundancy in the way to populate_record[_set] and to_record[_set]
functions operate, and some significant efficiency gains are made by
caching tuple descriptors.
Nikita Glukhov, edited some by me.
Reviewed by Aleksander Alekseev and Tom Lane.
|
|
Dmitry Dolgov, reviewed and lightly edited by me.
|
|
This makes almost all core code follow the policy introduced in the
previous commit. Specific decisions:
- Text search support functions with char* and length arguments, such as
prsstart and lexize, may receive unaligned strings. I doubt
maintainers of non-core text search code will notice.
- Use plain VARDATA() on values detoasted or synthesized earlier in the
same function. Use VARDATA_ANY() on varlenas sourced outside the
function, even if they happen to always have four-byte headers. As an
exception, retain the universal practice of using VARDATA() on return
values of SendFunctionCall().
- Retain PG_GETARG_BYTEA_P() in pageinspect. (Page images are too large
for a one-byte header, so this misses no optimization.) Sites that do
not call get_page_from_raw() typically need the four-byte alignment.
- For now, do not change btree_gist. Its use of four-byte headers in
memory is partly entangled with storage of 4-byte headers inside
GBT_VARKEY, on disk.
- For now, do not change gtrgm_consistent() or gtrgm_distance(). They
incorporate the varlena header into a cache, and there are multiple
credible implementation strategies to consider.
|
|
In functions that issue a deconstruct_array() call, consistently use
plain VARSIZE()/VARDATA() on the array elements. Prior practice was
divided between those and VARSIZE_ANY_EXHDR()/VARDATA_ANY().
|
|
This improves readability a bit and may make future improvements easier.
In passing, make sure that the JB_ROOT_IS_XXX macros deliver boolean (0/1)
results; the previous coding was a bug hazard, though no actual bugs are
known.
Nikita Glukhov, extended a bit by me
Discussion: https://postgr.es/m/[email protected]
|
|
Project style is to put things in this order, for the good and sufficient
reason that you often need the typedefs in the function declarations.
There already was one function declaration that needed a typedef, which
was randomly placed away from all the other static function declarations
in consequence. And the submitted patch for better json_populate_record
functionality jumped through even more hoops in order to preserve this
bad idea.
This patch only moves lines from point A to point B, no other changes.
|
|
This makes it possible to delete multiple keys from a jsonb value by
passing in an array of text values, which makes the operaiton much
faster than individually deleting the keys (which would require copying
the jsonb structure over and over again.
Reviewed by Dmitry Dolgov and Michael Paquier
|
|
|
|
The function was renamed in 908e23473, but the comment never learned
about it.
|
|
Commit 0b62fd036 did a fairly sloppy job of refactoring setPath()
to support jsonb_insert() along with jsonb_set(). In its defense,
though, there was no regression test case exercising the case of
replacing an existing element in a jsonb array.
Per bug #14366 from Peng Sun. Back-patch to 9.6 where bug was introduced.
Report: <[email protected]>
|
|
I found that half a dozen (nearly 5%) of our AllocSetContextCreate calls
had typos in the context-sizing parameters. While none of these led to
especially significant problems, they did create minor inefficiencies,
and it's now clear that expecting people to copy-and-paste those calls
accurately is not a great idea. Let's reduce the risk of future errors
by introducing single macros that encapsulate the common use-cases.
Three such macros are enough to cover all but two special-purpose contexts;
those two calls can be left as-is, I think.
While this patch doesn't in itself improve matters for third-party
extensions, it doesn't break anything for them either, and they can
gradually adopt the simplified notation over time.
In passing, change TopMemoryContext to use the default allocation
parameters. Formerly it could only be extended 8K at a time. That was
probably reasonable when this code was written; but nowadays we create
many more contexts than we did then, so that it's not unusual to have a
couple hundred K in TopMemoryContext, even without considering various
dubious code that sticks other things there. There seems no good reason
not to let it use growing blocks like most other contexts.
Back-patch to 9.6, mostly because that's still close enough to HEAD that
it's easy to do so, and keeping the branches in sync can be expected to
avoid some future back-patching pain. The bugs fixed by these changes
don't seem to be significant enough to justify fixing them further back.
Discussion: <[email protected]>
|
|
|
|
|
|
It inserts a new value into an jsonb array at arbitrary position or
a new key to jsonb object.
Author: Dmitry Dolgov
Reviewers: Petr Jelinek, Vitaly Burovoy, Andrew Dunstan
|
|
User-facing (even tested by regression tests) error conditions were thrown
with elog(), hence had wrong SQLSTATE and were untranslatable. And the
error message texts weren't up to project style, either.
|
|
jsonb_set() could produce wrong answers or incorrect error reports, or in
the worst case even crash, when trying to convert a path-array element into
an integer for use as an array subscript. Per report from Vitaly Burovoy.
Back-patch to 9.5 where the faulty code was introduced (in commit
c6947010ceb42143).
Michael Paquier
|
|
A thinko concerning nesting depth caused json_to_record() to produce bogus
output if a field of its input object contained a sub-object with a field
name matching one of the requested output column names. Per bug #13996
from Johann Visagie.
I added a regression test case based on his example, plus parallel tests
for json_to_recordset, jsonb_to_record, jsonb_to_recordset. The latter
three do not exhibit the same bug (which suggests that we may be missing
some opportunities to share code...) but testing seems like a good idea
in any case.
Back-patch to 9.4 where these functions were introduced.
|
|
Backpatch certain files through 9.1
|
|
|
|
Many functions stored JsonbIteratorToken values in variables of other
integer types. Also, standardize order relative to other declarations.
Expect compilers to generate the same code before and after this change.
|
|
Sufficiently-deep recursion heretofore elicited a SIGSEGV. If an
application constructs PostgreSQL json or jsonb values from arbitrary
user input, application users could have exploited this to terminate all
active database connections. That applies to 9.3, where the json parser
adopted recursive descent, and later versions. Only row_to_json() and
array_to_json() were at risk in 9.2, both in a non-security capacity.
Back-patch to 9.2, where the json type was introduced.
Oskari Saarenmaa, reviewed by Michael Paquier.
Security: CVE-2015-5289
|
|
Null path elements and, where the object is an array, invalid integer
elements now cause an error.
Incorrect behaviour noted by Thom Brown, patch from Dmitry Dolgov.
Backpatch to 9.5 where jsonb_set was introduced
|
|
To prevent perverse results, we now only return the other operand if
it's not scalar, and if both operands are of the same kind (array or
object).
Original bug complaint and patch from Oskari Saarenmaa, extended by me
to cover the cases of different kinds of jsonb.
Backpatch to 9.5 where jsonb_concat was introduced.
|
|
The previous code resulted in memory access beyond the path bounds. The
cure is to move it into a code branch that checks the value of lex_level
is within the correct bounds.
Bug reported and diagnosed by Piotr Stefaniak.
|
|
Defect noticed by Coverity.
|
|
Previously, there was an inconsistency across json/jsonb operators that
operate on datums containing JSON arrays -- only some operators
supported negative array count-from-the-end subscripting. Specifically,
only a new-to-9.5 jsonb deletion operator had support (the new "jsonb -
integer" operator). This inconsistency seemed likely to be
counter-intuitive to users. To fix, allow all places where the user can
supply an integer subscript to accept a negative subscript value,
including path-orientated operators and functions, as well as other
extraction operators. This will need to be called out as an
incompatibility in the 9.5 release notes, since it's possible that users
are relying on certain established extraction operators changed here
yielding NULL in the event of a negative subscript.
For the json type, this requires adding a way of cheaply getting the
total JSON array element count ahead of time when parsing arrays with a
negative subscript involved, necessitating an ad-hoc lex and parse.
This is followed by a "conversion" from a negative subscript to its
equivalent positive-wise value using the count. From there on, it's as
if a positive-wise value was originally provided.
Note that there is still a minor inconsistency here across jsonb
deletion operators. Unlike the aforementioned new "-" deletion operator
that accepts an integer on its right hand side, the new "#-" path
orientated deletion variant does not throw an error when it appears like
an array subscript (input that could be recognized by as an integer
literal) is being used on an object, which is wrong-headed. The reason
for not being stricter is that it could be the case that an object pair
happens to have a key value that looks like an integer; in general,
these two possibilities are impossible to differentiate with rhs path
text[] argument elements. However, we still don't allow the "#-"
path-orientated deletion operator to perform array-style subscripting.
Rather, we just return the original left operand value in the event of a
negative subscript (which seems analogous to how the established
"jsonb/json #> text[]" path-orientated operator may yield NULL in the
event of an invalid subscript).
In passing, make SetArrayPath() stricter about not accepting cases where
there is trailing non-numeric garbage bytes rather than a clean NUL
byte. This means, for example, that strings like "10e10" are now not
accepted as an array subscript of 10 by some new-to-9.5 path-orientated
jsonb operators (e.g. the new #- operator). Finally, remove dead code
for jsonb subscript deletion; arguably, this should have been done in
commit b81c7b409.
Peter Geoghegan and Andrew Dunstan
|
|
jsonb_set() and other clients of the setPathArray() utility function
could get spurious results when an array integer subscript is provided
that is not within the range of int.
To fix, ensure that the value returned by strtol() within setPathArray()
is within the range of int; when it isn't, assume an invalid input in
line with existing, similar cases. The path-orientated operators that
appeared in PostgreSQL 9.3 and 9.4 do not call setPathArray(), and
already independently take this precaution, so no change there.
Peter Geoghegan
|
|
Supporting deletion of JSON pairs within jsonb objects using an
array-style integer subscript allowed for surprising outcomes. This was
mostly due to the implementation-defined ordering of pairs within
objects for jsonb.
It also seems desirable to make jsonb integer subscript deletion
consistent with the 9.4 era general purpose integer subscripting
operator for jsonb (although that operator returns NULL when an object
is encountered, while we prefer here to throw an error).
Peter Geoghegan, following discussion on -hackers.
|
|
Per gripe from Tom Lane.
|
|
|
|
The function is given a fourth parameter, which defaults to true. When
this parameter is true, if the last element of the path is missing
in the original json, jsonb_set creates it in the result and assigns it
the new value. If it is false then the function does nothing unless all
elements of the path are present, including the last.
Based on some original code from Dmitry Dolgov, heavily modified by me.
Catalog version bumped.
|
|
This reverts commit fba12c8c6c4159e1923958a4006b26f3cf873254.
This relied on a commit that is also being reverted.
|
|
This function no longer needs to walk non-scalar structures passed to
it, following commit 54547bd87f49326d67051254c363e6597d16ffda.
|
|
Some of this is made possible by commit
9b74f32cdbff8b9be47fc69164eae552050509ff which lets pushJsonbValue
handle binary Jsonb values, meaning that clients no longer have to, and
some is just doing things in simpler and more straightforward ways.
|
|
|
|
Dmitriy Olshevskiy
|
|
These operations now error out if attempted on scalars, and simply
return the input if attempted on empty arrays or objects. Along the way
we remove the unnecessary cloning of the input when it's known to be
unchanged. Regression tests covering these cases are added.
|
|
jsonb_pretty(jsonb) produces nicely indented json output.
jsonb || jsonb concatenates two jsonb values.
jsonb - text removes a key and its associated value from the json
jsonb - int removes the designated array element
jsonb - text[] removes a key and associated value or array element at
the designated path
jsonb_replace(jsonb,text[],jsonb) replaces the array element designated
by the path or the value associated with the key designated by the path
with the given value.
Original work by Dmitry Dolgov, adapted and reworked for PostgreSQL core
by Andrew Dunstan, reviewed and tidied up by Petr Jelinek.
|
|
The first bug is not releasing a tupdesc when doing an early return out
of the function. The second bug is a logic error in choosing when to do
an early return if given an empty jsonb object.
Bug reports from Pavel Stehule and Tom Lane respectively.
Backpatch to 9.4 where these were introduced.
|
|
Petr Jelinek
|
|
I (tgl) fixed this last night in rowtypes.c, but I missed that the
code had been copied into a couple of other places.
Michael Paquier
|
