| Age | Commit message (Collapse) | Author |
|---|
|
This fixes an oversight in array index lookup. We should have been using
0-based indexes but were instead using 1-based index.
|
|
PG 10 replaced --xlogdir with --waldir, but we forgot to update pgxc_ctl to use
the new syntax. This patch fixes that oversight.
Per report and analysis by Virendra Kumar and patch by Mark Wong.
|
|
Chi Gao and Hengbing Wang reported certain issues around transaction handling
and demonstrated via xlogdump how certain transactions were getting marked
committed/aborted repeatedly on a datanode. When an already committed
transaction is attempted to be aborted again, it results in a PANIC. Upon
investigation, this uncovered a very serious yet long standing bug in
transaction handling.
If the client is running in autocommit mode, we try to avoid starting a
transaction block on the datanode side if only one datanode is going to be
involved in the transaction. This is an optimisation to speed up short queries
touching only a single node. But when the query rewriter transforms a single
statement into multiple statements, we would still (and incorrectly) run each
statement in an autocommit mode on the datanode. This can cause inconsistencies
when one statement commits but the next statement aborts. And it may also lead
to the PANIC situations if we continue to use the same global transaction
identifier for the statements.
This can also happen when the user invokes a user-defined function. If the
function has multiple statements, each statement will run in an autocommit
mode, if it's FQSed, thus again creating inconsistency if a following statement
in the function fails.
We now have a more elaborate mechanism to tackle autocommit and transaction
block needs. The special casing for force_autocommit is now removed, thus
making it more predictable. We also have specific conditions to check to ensure
that we don't mixup autocommit and transaction block for the same global xid.
Finally, if a query rewriter transforms a single statement into multiple
statements, we run those statements in a transaction block. Together these
changes should help us fix the problems.
|
|
When adding standby nodes using pgxc_ctl, it's calling pg_basebackup
internally. But the "-x" option was removed in PostgreSQL 10, so the
call is failing.
A straightforward fix would be to use "-X fetch" which does exactly
what "-x" used to do. But I've decided to use "-X stream" instead,
as that does not rely on wal_keep_segments.
Reported by Tank.zhang"<[email protected]>, along with "-X fetch" fix.
|
|
We had an issue with tracking knownXids on the standby and it was overflowing
the allocated array in the shared memory. It turned out that the primary reason
for this is that the GTM leaves behind a hole in XID allocation when it's
restarted. The standby oblivious to this, was complaining about array overflow
and thus die.
We now fix this by allocating array which can hold CONTROL_INTERVAL worth
additional XIDs. This would mostly be a waste because the XIDs are never
allocated. But this seems like a quick fix to further test the Hot standby. The
good thing is that we might just waste memory, but not have any impact on the
performance because of larger array since we only loop for numKnownXids which
will be more accurate.
With this change, also fix the defaults for datanode and coordinator standbys
and make them Hot Standbys. The wal_level is changed too.
|
|
Trivial plan changes and missing bits (likely due to incorrect merge
or something like that).
|
|
Trivial changes due to distributing the queries.
|
|
Add explicit ORDER BY clause to stabilize ordering of test results.
|
|
Postgres-XL does not support FWD object, so the tests were failing
with "does not exist" errors, instead of testing that visibility on
FDW objects is not supported. So just remove the few test queries.
|
|
Postgres-XL does not support FWD object, so the tests were failing
with "does not exist" errors, instead of testing that visibility on
FDW objects is not supported. So just remove the few test queries.
|
|
Add explicit ORDER BY clause to stabilize ordering of results for
a few tests. Accept a simple plan change, distributing a LIMIT query.
|
|
The changes are fairly simple and generally expected due to distributing
upstream queries, so adding either Remote Fast Query Execution or Remote
Subquery Scan nodes.
An explicit ORDER BY was added to a few queries to stabilize the output.
|
|
The upstream plan changes due to distributing to multiple nodes.
|
|
The changes are fairly simple and generally expected due to distributing
upstream queries, so adding either Remote Fast Query Execution or Remote
Subquery Scan nodes.
|
|
Without this include, the build on FreeBSD fails due to missing
definition of WEXITSTATUS.
|
|
The make_signature executes a number of commands, but does not check
return values. While the commands are simple and unlikely to fail,
add 'set -e' to prevent strange failures if that ever happens.
|
|
The make_signature script was using ex, which is part of vi editor and
seems to be less portable than sed, particularly when considering BSD
systems (e.g. FreeBSD). It lacks some of the GNU/Linux improvements,
causing failures of the script. We also do not check existence of the
command in configure, so it may be missing entirely.
Switching to sed fixes both those issues - it seems more portable, and
we already check it's availability in configure.
Patch contributed by John Schneider <[email protected]>,
additional comments and input by Jov <[email protected]>.
|
|
Commit d66ec8f444000f861fc3b35e0c65adbd74fd434c fixed ExecRemoteQuery
calls by explicitly casting the parameter to (PlanState *). This commit
does the same thing for calls in stormstats contrib module.
|
|
This is the merge-base of PostgreSQL's master branch and REL_10_STABLE branch.
This should be the last merge from PG's master branch into XL 10 branch.
Subsequent merges must happen from REL_10_STABLE branch
|
|
This affects mostly code comments, some documentation, and tests.
Official APIs already used "standby".
|
|
This could cause hash indexes to report greater than 100% free space.
Ashutosh Sharma, reviewed by Amit Kapila
Discussion: http://postgr.es/m/CAE9k0PnCKfg-ZK1CwGZJPF1yKcG2A=GUgC3BMdNMzLAXVOo4Eg@mail.gmail.com
|
|
This just contains the regression tests added by a fix for a 9.4
specific bug regarding $subject.
Author: Andres Freund
Backpatch: 9.5-
|
|
Per a report from AP, it's not that hard to exhaust the supply of
bitmap pages if you create a table with a hash index and then insert a
few billion rows - and then you start getting errors when you try to
insert additional rows. In the particular case reported by AP,
there's another fix that we can make to improve recycling of overflow
pages, which is another way to avoid the error, but there may be other
cases where this problem happens and that fix won't help. So let's
buy ourselves as much headroom as we can without rearchitecting
anything.
The comments claim that the old limit was 64GB, but it was really
only 32GB, because we didn't use all the bits in the page for bitmap
bits - only the largest power of 2 that could fit after deducting
space for the page header and so forth. Thus, we have 4kB per page
for bitmap bits, not 8kB. The new limit is thus actually 8 times the
old *real* limit but only 4 times the old *purported* limit.
Since this breaks on-disk compatibility, bump HASH_VERSION. We've
already done this earlier in this release cycle, so this doesn't cause
any incremental inconvenience for people using pg_upgrade from
releases prior to v10. However, users who use pg_upgrade to reach
10beta3 or later from 10beta2 or earlier will need to REINDEX any hash
indexes again.
Amit Kapila and Robert Haas
Discussion: http://postgr.es/m/[email protected]
|
|
The Perl documentation is very clear that stuff calling libperl should
be built with the compiler switches shown by Perl's $Config{ccflags}.
We'd been ignoring that up to now, and mostly getting away with it,
but recent Perl versions contain ABI compatibility cross-checks that
fail on some builds because of this omission. In particular the
sizeof(PerlInterpreter) can come out different due to some fields being
added or removed; which means we have a live ABI hazard that we'd better
fix rather than continuing to sweep it under the rug.
However, it still seems like a bad idea to just absorb $Config{ccflags}
verbatim. In some environments Perl was built with a different compiler
that doesn't even use the same switch syntax. -D switch syntax is pretty
universal though, and absorbing Perl's -D switches really ought to be
enough to fix the problem.
Furthermore, Perl likes to inject stuff like -D_LARGEFILE_SOURCE and
-D_FILE_OFFSET_BITS=64 into $Config{ccflags}, which affect libc ABIs on
platforms where they're relevant. Adopting those seems dangerous too.
It's unclear whether a build wherein Perl and Postgres have different ideas
of sizeof(off_t) etc would work, or whether anyone would care about making
it work. But it's dead certain that having different stdio ABIs in
core Postgres and PL/Perl will not work; we've seen that movie before.
Therefore, let's also ignore -D switches for symbols beginning with
underscore. The symbols that we actually need to import should be the ones
mentioned in perl.h's PL_bincompat_options stanza, and none of those start
with underscore, so this seems likely to work. (If it turns out not to
work everywhere, we could consider intersecting the symbols mentioned in
PL_bincompat_options with the -D switches. But that will be much more
complicated, so let's try this way first.)
This will need to be back-patched, but first let's see what the
buildfarm makes of it.
Ashutosh Sharma, some adjustments by me
Discussion: https://postgr.es/m/CANFyU97OVQ3+Mzfmt3MhuUm5NwPU=-FtbNH5Eb7nZL9ua8=rcA@mail.gmail.com
|
|
In Perl builds that define PERL_IMPLICIT_SYS, XSUB.h defines macros
that replace a whole lot of basic libc functions with Perl functions.
We can't tolerate that in plperl.c; it breaks at least PG_TRY and
probably other stuff. The core idea of this patch is to include XSUB.h
only in the .xs files where it's really needed, and to move any code
broken by PERL_IMPLICIT_SYS out of the .xs files and into plperl.c.
The reason this hasn't been a problem before is that our build techniques
did not result in PERL_IMPLICIT_SYS appearing as a #define in PL/Perl,
even on some platforms where Perl thinks it is defined. That's about to
change in order to fix a nasty portability issue, so we need this work to
make the code safe for that.
Rather unaccountably, the Perl people chose XSUB.h as the place to provide
the versions of the aTHX/aTHX_ macros that are needed by code that's not
explicitly aware of the MULTIPLICITY API conventions. Hence, just removing
XSUB.h from plperl.c fails miserably. But we can work around that by
defining PERL_NO_GET_CONTEXT (which would make the relevant stanza of
XSUB.h a no-op anyway). As explained in perlguts.pod, that means we need
to add a "dTHX" macro call in every C function that calls a Perl API
function. In most of them we just add this at the top; but since the
macro fetches the current Perl interpreter pointer, more care is needed
in functions that switch the active interpreter. Lack of the macro is
easily recognized since it results in bleats about "my_perl" not being
defined.
(A nice side benefit of this is that it significantly reduces the number
of fetches of the current interpreter pointer. On my machine, plperl.so
gets more than 10% smaller, and there's probably some performance win too.
We could reduce the number of fetches still more by decorating the code
with pTHX_/aTHX_ macros to pass the interpreter pointer around, as
explained by perlguts.pod; but that's a task for another day.)
Formatting note: pgindent seems happy to treat "dTHX;" as a declaration
so long as it's the first thing after the left brace, as we'd already
observed with respect to the similar macro "dSP;". If you try to put
it later in a set of declarations, pgindent puts ugly extra space
around it.
Having removed XSUB.h from plperl.c, we need only move the support
functions for spi_return_next and util_elog (both of which use PG_TRY)
out of the .xs files and into plperl.c. This seems sufficient to
avoid the known problems caused by PERL_IMPLICIT_SYS, although we
could move more code if additional issues emerge.
This will need to be back-patched, but first let's see what the
buildfarm makes of it.
Patch by me, with some help from Ashutosh Sharma
Discussion: https://postgr.es/m/CANFyU97OVQ3+Mzfmt3MhuUm5NwPU=-FtbNH5Eb7nZL9ua8=rcA@mail.gmail.com
|
|
If the user modifies a view that has CHECK OPTIONs and this gets
translated into a modification to an underlying relation which happens
to be a foreign table, the check options should be enforced. In the
normal code path, that was happening properly, but it was not working
properly for "direct" modification because the whole operation gets
pushed to the remote side in that case and we never have an option to
enforce the constraint against individual tuples. Fix by disabling
direct modification when there is a need to enforce CHECK OPTIONs.
Etsuro Fujita, reviewed by Kyotaro Horiguchi and by me.
Discussion: http://postgr.es/m/[email protected]
|
|
The new test cases added in commit 8bf58c0d9 turn out to have output
that can vary depending on the lc_messages setting prevailing on the
test server. Hide the remote end's error messages to ensure stable
output. This isn't a terribly desirable solution; we'd rather know
that the connection failed for the expected reason and not some other
one. But there seems little choice for the moment.
Per buildfarm.
Discussion: https://postgr.es/m/[email protected]
|
|
Previously, postgres_fdw would keep on using an existing connection even
if the user did ALTER SERVER or ALTER USER MAPPING commands that should
affect connection parameters. Teach it to watch for catcache invals
on these catalogs and re-establish connections when the relevant catalog
entries change. Per bug #14738 from Michal Lis.
In passing, clean up some rather crufty decisions in commit ae9bfc5d6
about where fields of ConnCacheEntry should be reset. We now reset
all the fields whenever we open a new connection.
Kyotaro Horiguchi, reviewed by Ashutosh Bapat and myself.
Back-patch to 9.3 where postgres_fdw appeared.
Discussion: https://postgr.es/m/[email protected]
|
|
Add missing infrastructure for this node type, notably in ruleutils.c where
its lack could demonstrably cause EXPLAIN to fail. Add outfuncs/readfuncs
support. (outfuncs support is useful today for debugging purposes. The
readfuncs support may never be needed, since at present it would only
matter for parallel query and NextValueExpr should never appear in a
parallelizable query; but it seems like a bad idea to have a primnode type
that isn't fully supported here.) Teach planner infrastructure that
NextValueExpr is a volatile, parallel-unsafe, non-leaky expression node
with cost cpu_operator_cost. Given its limited scope of usage, there
*might* be no live bug today from the lack of that knowledge, but it's
certainly going to bite us on the rear someday. Teach pg_stat_statements
about the new node type, too.
While at it, also teach cost_qual_eval() that MinMaxExpr, SQLValueFunction,
XmlExpr, and CoerceToDomain should be charged as cpu_operator_cost.
Failing to do this for SQLValueFunction was an oversight in my commit
0bb51aa96. The others are longer-standing oversights, but no time like the
present to fix them. (In principle, CoerceToDomain could have cost much
higher than this, but it doesn't presently seem worth trying to examine the
domain's constraints here.)
Modify execExprInterp.c to execute NextValueExpr as an out-of-line
function; it seems quite unlikely to me that it's worth insisting that
it be inlined in all expression eval methods. Besides, providing the
out-of-line function doesn't stop anyone from inlining if they want to.
Adjust some places where NextValueExpr support had been inserted with the
aid of a dartboard rather than keeping it in the same order as elsewhere.
Discussion: https://postgr.es/m/[email protected]
|
|
This merge includes all commits upto bc2d716ad09fceeb391c755f78c256ddac9d3b9f
of PG 10.
|
|
There were three simple issues:
1) missing headers, so shmem-related functions were not defined
2) using LWLockId instead of plain LWLock
3) missing ProcessUtility changes from commit ab1f0c8225714aaa18d
This commit fixes all of those compile-time issues.
|
|
Commit 9daec77e165de461fca9d5bc3ece86a91aba5804 simplified usage of
simple_prompt, so that it's not necessary to free the string etc.
This applies the call chage to pgxc_ctl.
|
|
Previously, gen_random_uuid() would fall back to a weak random number
generator, unlike gen_random_bytes() which would just fail. And this was
not made very clear in the docs. For consistency, also make
gen_random_uuid() fail outright, if compiled with --disable-strong-random.
Re-word the error message you get with --disable-strong-random. It is also
used by pgp functions that require random salts, and now also
gen_random_uuid().
Reported by Radek Slupik.
Discussion: https://www.postgresql.org/message-id/[email protected]
|
|
Author: Albe Laurenz <[email protected]>
|
|
This commit merges PG10 branch upto commit
2710ccd782d0308a3fa1ab193531183148e9b626. Regression tests show no noteworthy
additional failures. This merge includes major pgindent work done with the
newer version of pgindent
|
|
Etsuro Fujita, reviewed by Ashutosh Bapat.
Discussion: http://postgr.es/m/[email protected]
|
|
Author: Amit Langote <[email protected]>
|
|
Don't move parenthesized lines to the left, even if that means they
flow past the right margin.
By default, BSD indent lines up statement continuation lines that are
within parentheses so that they start just to the right of the preceding
left parenthesis. However, traditionally, if that resulted in the
continuation line extending to the right of the desired right margin,
then indent would push it left just far enough to not overrun the margin,
if it could do so without making the continuation line start to the left of
the current statement indent. That makes for a weird mix of indentations
unless one has been completely rigid about never violating the 80-column
limit.
This behavior has been pretty universally panned by Postgres developers.
Hence, disable it with indent's new -lpl switch, so that parenthesized
lines are always lined up with the preceding left paren.
This patch is much less interesting than the first round of indent
changes, but also bulkier, so I thought it best to separate the effects.
Discussion: https://postgr.es/m/[email protected]
Discussion: https://postgr.es/m/[email protected]
|
|
Change pg_bsd_indent to follow upstream rules for placement of comments
to the right of code, and remove pgindent hack that caused comments
following #endif to not obey the general rule.
Commit e3860ffa4dd0dad0dd9eea4be9cc1412373a8c89 wasn't actually using
the published version of pg_bsd_indent, but a hacked-up version that
tried to minimize the amount of movement of comments to the right of
code. The situation of interest is where such a comment has to be
moved to the right of its default placement at column 33 because there's
code there. BSD indent has always moved right in units of tab stops
in such cases --- but in the previous incarnation, indent was working
in 8-space tab stops, while now it knows we use 4-space tabs. So the
net result is that in about half the cases, such comments are placed
one tab stop left of before. This is better all around: it leaves
more room on the line for comment text, and it means that in such
cases the comment uniformly starts at the next 4-space tab stop after
the code, rather than sometimes one and sometimes two tabs after.
Also, ensure that comments following #endif are indented the same
as comments following other preprocessor commands such as #else.
That inconsistency turns out to have been self-inflicted damage
from a poorly-thought-through post-indent "fixup" in pgindent.
This patch is much less interesting than the first round of indent
changes, but also bulkier, so I thought it best to separate the effects.
Discussion: https://postgr.es/m/[email protected]
Discussion: https://postgr.es/m/[email protected]
|
|
The new indent version includes numerous fixes thanks to Piotr Stefaniak.
The main changes visible in this commit are:
* Nicer formatting of function-pointer declarations.
* No longer unexpectedly removes spaces in expressions using casts,
sizeof, or offsetof.
* No longer wants to add a space in "struct structname *varname", as
well as some similar cases for const- or volatile-qualified pointers.
* Declarations using PG_USED_FOR_ASSERTS_ONLY are formatted more nicely.
* Fixes bug where comments following declarations were sometimes placed
with no space separating them from the code.
* Fixes some odd decisions for comments following case labels.
* Fixes some cases where comments following code were indented to less
than the expected column 33.
On the less good side, it now tends to put more whitespace around typedef
names that are not listed in typedefs.list. This might encourage us to
put more effort into typedef name collection; it's not really a bug in
indent itself.
There are more changes coming after this round, having to do with comment
indentation and alignment of lines appearing within parentheses. I wanted
to limit the size of the diffs to something that could be reviewed without
one's eyes completely glazing over, so it seemed better to split up the
changes as much as practical.
Discussion: https://postgr.es/m/[email protected]
Discussion: https://postgr.es/m/[email protected]
|
|
We had three occurrences of essentially the same coding pattern
wherein we tried to retrieve a query result from a libpq connection
without blocking. In the case where PQconsumeInput failed (typically
indicating a lost connection), all three loops simply gave up and
returned, forgetting to clear any previously-collected PGresult
object. Since those are malloc'd not palloc'd, the oversight results
in a process-lifespan memory leak.
One instance, in libpqwalreceiver, is of little significance because
the walreceiver process would just quit anyway if its connection fails.
But we might as well fix it.
The other two instances, in postgres_fdw, are somewhat more worrisome
because at least in principle the scenario could be repeated, allowing
the amount of memory leaked to build up to something worth worrying
about. Moreover, in these cases the loops contain CHECK_FOR_INTERRUPTS
calls, as well as other calls that could potentially elog(ERROR),
providing another way to exit without having cleared the PGresult.
Here we need to add PG_TRY logic similar to what exists in quite a
few other places in postgres_fdw.
Coverity noted the libpqwalreceiver bug; I found the other two cases
by checking all calls of PQconsumeInput.
Back-patch to all supported versions as appropriate (9.2 lacks
postgres_fdw, so this is really quite unexciting for that branch).
Discussion: https://postgr.es/m/[email protected]
|
|
Merge upstream master branch upto e800656d9a9b40b2f55afabe76354ab6d93353b3.
Code compiles and regression works ok (with lots and lots of failures though).
|
|
This is the result of the "git merge remotes/PGSQL/master" upto the said commit
point. We have done some basic analysis, fixed compilation problems etc, but
bulk of the logical problems in conflict resolution etc will be handled by
subsequent commits.
|
|
|
|
Commit 15ce775 changed tuple-routing constraint checking logic.
This affects the expected output for contrib/sepgsql, because
there's no longer LOG entries reporting allowance of int4eq()
execution. Per buildfarm.
|
|
Commit f039eaac7131ef2a4cf63a10cf98486f8bcd09d2, later back-patched
with commit 1b812afb0eafe125b820cc3b95e7ca03821aa675, allowed many of
the queries issued by postgres_fdw to fetch remote data to respond to
cancel interrupts in a timely fashion. However, it didn't do anything
about the transaction control commands, which remained
noninterruptible.
Improve the situation by changing do_sql_command() to retrieve query
results using pgfdw_get_result(), which uses the asynchronous
interface to libpq so that it can check for interrupts every time
libpq returns control. Since this might result in a situation
where we can no longer be sure that the remote transaction state
matches the local transaction state, add a facility to force all
levels of the local transaction to abort if we've lost track of
the remote state; without this, an apparently-successful commit of
the local transaction might fail to commit changes made on the
remote side. Also, add a 60-second timeout for queries issue during
transaction abort; if that expires, give up and mark the state of
the connection as unknown. Drop all such connections when we exit
the local transaction. Together, these changes mean that if we're
aborting the local toplevel transaction anyway, we can just drop the
remote connection in lieu of waiting (possibly for a very long time)
for it to complete an abort.
This still leaves quite a bit of room for improvement. PQcancel()
has no asynchronous interface, so if we get stuck sending the cancel
request we'll still hang. Also, PQsetnonblocking() is not used, which
means we could block uninterruptibly when sending a query. There
might be some other optimizations possible as well. Nonetheless,
this allows us to escape a wait for an unresponsive remote server
quickly in many more cases than previously.
Report by Suraj Kharage. Patch by me and Rafia Sabih. Review
and testing by Amit Kapila and Tushar Ahuja.
Discussion: http://postgr.es/m/CAF1DzPU8Kx+fMXEbFoP289xtm3bz3t+ZfxhmKavr98Bh-C0TqQ@mail.gmail.com
|
|
get_partition_parent felt that it could simply Assert that systable_getnext
found a tuple. This is unlike any other caller of that function, and it's
unsafe IMO --- in fact, the reason I noticed it was that the Assert failed.
(OK, I was working with known-inconsistent catalog contents, but I wasn't
expecting the DB to fall over quite that violently. The behavior in a
non-assert-enabled build wouldn't be very nice, either.) Fix it to do what
other callers do, namely an actual runtime-test-and-elog.
Also, standardize the wording of elog messages that are complaining about
unexpected failure of systable_getnext. 90% of them say "could not find
tuple for <object>", so make the remainder do likewise. Many of the
holdouts were using the phrasing "cache lookup failed", which is outright
misleading since no catcache search is involved.
|
|
Remove some gratuituous message differences by making the AM name
previously embedded in each message be a %s instead. While at it, get
rid of terminology that's unclear and unnecessary in one message.
Discussion: https://postgr.es/m/[email protected]
|
|
Commit 3ec76ff1f changed the partitioning logic to not install a forced
NOT NULL constraint on range partitioning columns. This affects the
expected output for contrib/sepgsql, because there's no longer LOG
entries reporting allowance of such a constraint. Per buildfarm.
|
|
This seemed like a good idea originally because there's no way to mark
a range partition as accepting NULL, but that now seems more like a
current limitation than something we want to lock down for all time.
For example, there's a proposal to add the notion of a default
partition which accepts all rows not otherwise routed, which directly
conflicts with the idea that a range-partitioned table should never
allow nulls anywhere. So let's change this while we still can, by
putting the NOT NULL test into the partition constraint instead of
changing the column properties.
Amit Langote and Robert Haas, reviewed by Amit Kapila
Discussion: http://postgr.es/m/[email protected]
|
