New South Wales F351 class locomotive

New South Wales F351 Class
F351 Class Locomotive
Type and origin Power type Steam Builder Beyer, Peacock & Company (12) Henry Vale (6) Order number BP: 6617 Serial number BP: 2657–2668 Build date 1884–1887 Total produced 18
Specifications Configuration: ​  • Whyte 2-4-0T  • UIC 1B n2t Gauge 4 ft 8+1⁄2 in (1,435 mm) standard gauge Fuel type Coal Firebox: ​  • Grate area 14 sq ft (1.3 m2) Boiler pressure 140 lbf/in2 (970 kPa) Cylinders 2 inside Cylinder size 15 in × 22 in (381 mm × 559 mm)
Performance figures Tractive effort 9,089 lbf (40.4 kN)
Career Operators New South Wales Government Railways Numbers Original: 351-368 Post 1924: 1031-1033, 1035-1037, 1039-1043 Preserved 1033, 1042 Disposition 2 preserved, 16 scrapped

The F351 class (X10 post 1924) was a class of steam locomotives built for the New South Wales Government Railways in Australia.

History

The locomotives were originally ordered in 1879, but the order was cancelled. A follow-up order in 1882 was made, the specification originally for 2-4-0T locomotives with 5 ft 0 in diameter driving wheels made by the acting locomotive engineer Mr Scott. During his absence in England on official business, this was changed by Mr T. Middelton to an 0-6-0 type with 4 ft 0 in diameter driving wheels, claiming that such locomotives would be capable of 30-33 mph in service. Despite Scott's protests, Commissioner Goodchap approved the changes and six locomotives were designed and built by Vulcan Foundry. The subsequent 0-6-0 locomotives became the R(285) class, later the Z18 class.

In August 1884, Scott informed the commissioner that more locomotives were required with the opening of the Illawarra extension. Mr Middelton wanted more of the R(285 class), but Mr Scott recommended his original proposed design from 1881. After much hesitation by the government, Beyer, Peacock & Company were asked to design and build the locomotives. These became the F351 class and went into service on the Sydney suburban network in 1885-86, being numbered 351 to 362. In 1887, six more locomotives of this design (numbered 363 to 368) were delivered by Henry Vale of Sydney. No. 366 was involved in the Redfern collision of 1894. The design was extremely similar to a number of 2-4-0T locomotives supplied to the Isle of Wight Central Railway from 1864. A similar locomotive was delivered to the South Australian Railways from 1884 as its P class.

Their running life came to an end in 1901 as a result of the findings on the Sydenham derailment involving No. 363 and the whole class was taken out of passenger work. The F351 class were known to oscillate and rock at high speeds and were officially limited to 30 mph. A factor in the Sydenham derailment was the driver exceeding the official speed limit. The locomotive was believed to be doing 51 mph when the accident occurred. The entire class was subsequently withdrawn from passenger work and allocated to various shunting, yard, and depot duties. A number of the class were modified with a heavy cast iron front buffer beam in an attempt to stabilise the front of the locomotive after 1901. Between 1906 and 1929, ten of the class were sold to various private railway operators.

All members of the class had been withdrawn from passenger work by 1914. Eleven were still on the books at this stage and were renumbered Lo.19-Lo.26 (Lo. Indicated that they were no longer in revenue-earning service). As part of the 1924 reclassification scheme they became members of the X10 class, bearing numbers 1031-1033, 1035-1037 and 1039-1043. From 1914, members of the class still in NSWGR service were rebuilt with the same domed boilers that replaced the dome-less type originally supplied on the R285 class. A number of other modifications were made to the class such as replacing the leaf spring on the front axle with twin coil springs.

Three of the class were still in service with the NSWGR from 1940. 1033 at Eveleigh Railway Workshops, 1036 at Junee Locomotive Depot (withdrawn and scrapped in 1966) and 1042 at Cardiff Locomotive Workshops. 1042 was given an overhaul as late as 1970 at the age of 83 years and continued working until February 1973, only three months shy of 86 years in service and having completed 401,359 km (249,446 miles) of logged running. 1036 (F359) had accumulated the most mileage in service with 707,564 kilometres (437,889 miles) at withdrawal.

Preservation

Two have been preserved:

• 1033 at the Transport Heritage NSW museum, Thirlmere.
• 1042 at Maitland Steam Park

External links

Media related to New South Wales F351 class locomotives at Wikimedia Commons