Jump to content

Bispherical coordinates

From Wikipedia, the free encyclopedia
Illustration of bispherical coordinates, which are obtained by rotating a two-dimensional bipolar coordinate system about the axis joining its two foci. The foci are located at distance 1 from the vertical z-axis. The red self-intersecting torus is the σ=45° isosurface, the blue sphere is the τ=0.5 isosurface, and the yellow half-plane is the φ=60° isosurface. The green half-plane marks the x-z plane, from which φ is measured. The black point is located at the intersection of the red, blue and yellow isosurfaces, at Cartesian coordinates roughly (0.841, -1.456, 1.239).

Bispherical coordinates are a three-dimensional orthogonal coordinate system that results from rotating the two-dimensional bipolar coordinate system about the axis that connects the two foci. Thus, the two foci and in bipolar coordinates remain points (on the -axis, the axis of rotation) in the bispherical coordinate system.

Definition

[edit]

The most common definition of bispherical coordinates is

where the coordinate of a point equals the angle and the coordinate equals the natural logarithm of the ratio of the distances and to the foci

The coordinates ranges are -∞ < < ∞, 0 ≤ and 0 ≤ ≤ 2.

Coordinate surfaces

[edit]

Surfaces of constant correspond to intersecting tori of different radii

that all pass through the foci but are not concentric. The surfaces of constant are non-intersecting spheres of different radii

that surround the foci. The centers of the constant- spheres lie along the -axis, whereas the constant- tori are centered in the plane.

Inverse formulae

[edit]

The formulae for the inverse transformation are:

where and

Scale factors

[edit]

The scale factors for the bispherical coordinates and are equal

whereas the azimuthal scale factor equals

Thus, the infinitesimal volume element equals

and the Laplacian is given by

Other differential operators such as and can be expressed in the coordinates by substituting the scale factors into the general formulae found in orthogonal coordinates.

Applications

[edit]

The classic applications of bispherical coordinates are in solving partial differential equations, e.g., Laplace's equation, for which bispherical coordinates allow a separation of variables. However, the Helmholtz equation is not separable in bispherical coordinates. A typical example would be the electric field surrounding two conducting spheres of different radii.

References

[edit]

Bibliography

[edit]
  • Morse PM, Feshbach H (1953). Methods of Theoretical Physics, Parts I and II. New York: McGraw-Hill. pp. 665–666, 1298–1301.
  • Korn GA, Korn TM (1961). Mathematical Handbook for Scientists and Engineers. New York: McGraw-Hill. p. 182. LCCN 59014456.
  • Zwillinger D (1992). Handbook of Integration. Boston, MA: Jones and Bartlett. p. 113. ISBN 0-86720-293-9.
  • Moon PH, Spencer DE (1988). "Bispherical Coordinates (η, θ, ψ)". Field Theory Handbook, Including Coordinate Systems, Differential Equations, and Their Solutions (corrected 2nd ed., 3rd print ed.). New York: Springer Verlag. pp. 110–112 (Section IV, E4Rx). ISBN 0-387-02732-7.
[edit]