Structural acoustics is the study of the mechanical waves in structures and how they interact with and radiate into adjacent media. The field of structural acoustics is often referred to as vibroacoustics in Europe and Asia.[citation needed] People that work in the field of structural acoustics are known as structural acousticians.[citation needed] The field of structural acoustics can be closely related to a number of other fields of acoustics including noise, transduction, underwater acoustics, and physical acoustics.

Vibrations in structures[1]

edit

Compressional and shear waves (isotropic, homogeneous material)

edit

Compressional waves (often referred to as longitudinal waves) expand and contract in the same direction (or opposite) as the wave motion. The wave equation dictates the motion of the wave in the x direction.

 

where   is the displacement and   is the longitudinal wave speed. This has the same form as the acoustic wave equation in one-dimension.   is determined by properties (bulk modulus   and density  ) of the structure according to

 

When two dimensions of the structure are small with respect to wavelength (commonly called a beam), the wave speed is dictated by Youngs modulus   instead of the   and are consequently slower than in infinite media.

Shear waves occur due to the shear stiffness and follows a similar equation, but with the displacement occurring in the transverse direction, perpendicular to the wave motion.

 

The shear wave speed is governed by the shear modulus   which is less than   and  , making shear waves slower than longitudinal waves.

Bending waves in beams and plates

edit

Most sound radiation is caused by bending (or flexural) waves, that deform the structure transversely as they propagate. Bending waves are more complicated than compressional or shear waves and depend on material properties as well as geometric properties. They are also dispersive since different frequencies travel at different speeds.

Modeling vibrations

edit

Finite element analysis can be used to predict the vibration of complex structures. A finite element computer program will assemble the mass, stiffness, and damping matrices based on the element geometries and material properties, and solve for the vibration response based on the loads applied.

 

Sound-structure interaction[2]

edit

Fluid-structure Interaction

edit

When a vibrating structure is in contact with a fluid, the normal particle velocities at the interface must be conserved (i.e. be equivalent). This causes some of the energy from the structure to escape into the fluid, some of which radiates away as sound, some of which stays near the structure and does not radiate away. For most engineering applications, the numerical simulation of fluid-structure interactions involved in vibro-acoustics may be achieved by coupling the Finite element method and the Boundary element method.

See also

edit

References

edit
  1. ^ Stephen A. Hambric, Applied Research Lab at The Pennsylvania State University, STRUCTURAL ACOUSTICS Tutorial I, Vibrations in structures, retrieved 2021-01-28
  2. ^ Stephen A. Hambric and John B. Fahnline, Applied Research Lab at The Pennsylvania State University, STRUCTURAL ACOUSTICS Tutorial II, SOUND—STRUCTURE INTERACTION, retrieved 2021-01-28
edit