This article needs additional citations for verification. (October 2009) |
In Fibre Channel protocol, a registered state change notification (RSCN) is a Fibre Channel fabric's notification sent to all specified nodes in case of any major fabric changes. This allows nodes to immediately gain knowledge about the fabric and react accordingly.
| Fibre Channel | |
|---|---|
| Layer 4. Protocol mapping | |
| LUN masking | |
| Layer 3. Common services | |
| Layer 2. Network | |
| Fibre Channel fabric Fibre Channel zoning Registered state change notification | |
| Layer 1. Data link | |
| Fibre Channel 8b/10b encoding | |
| Layer 0. Physical |
Overview
editImplementation of this function is obligatory for each Fibre Channel switch, but is optional for a node. This function belongs to a second level of the protocol, or FC2.
Some events that trigger notifications are:
- Nodes joining or leaving the fabric (most common usage)
- Switches joining or leaving the fabric
- Changing the switch name
The nodes wishing to be notified in such way need to register themselves first at the Fabric Controller, which is a standardized FC virtual address present at each switch.
RSCN and zoning
editIf a fabric has some zones configured for additional security, notifications do not cross zone boundaries if not needed. Simply, there is no need to notify a node about a change that it cannot see anyway (because it happened in a separate zone).
Example
editFor example, let's assume there is a fabric with just one node, namely a server's FC-compatible HBA. First it registers itself for notifications. Then a human administrator connects another node, like a disk array, to the fabric. This event is known at first only to a single switch, the one that detected one of its ports going online. The switch, however, has a list of registered nodes (currently containing only the HBA node) and notifies every one of them. As the HBA receives the notification, it chooses to query the nearest switch about current list of nodes. It detects a new disk array and starts to communicate with it on a SCSI level, asking for a list of SCSI LUNs. Then it notifies a server's operating system, that there is a new SCSI target containing some LUNs. The operating system auto-configures those as new block devices, ready for use.
See also
editExternal links
edit- DeSanti; et al. (August 2007). "RFC 4983: Fibre Channel Registered State Change Notification (RSCN) MIB". IETF. doi:10.17487/RFC4983. Retrieved 2011-06-14.
{{cite journal}}: Cite journal requires|journal=(help)