In mathematics, a product is the result of multiplication, or an expression that identifies objects (numbers or variables) to be multiplied, called factors. For example, 21 is the product of 3 and 7 (the result of multiplication), and is the product of and (indicating that the two factors should be multiplied together). When one factor is an integer, the product is called a multiple.

The order in which real or complex numbers are multiplied has no bearing on the product; this is known as the commutative law of multiplication. When matrices or members of various other associative algebras are multiplied, the product usually depends on the order of the factors. Matrix multiplication, for example, is non-commutative, and so is multiplication in other algebras in general as well.

There are many different kinds of products in mathematics: besides being able to multiply just numbers, polynomials or matrices, one can also define products on many different algebraic structures.

Product of two numbers

edit

Originally, a product was and is still the result of the multiplication of two or more numbers. For example, 15 is the product of 3 and 5. The fundamental theorem of arithmetic states that every composite number is a product of prime numbers, that is unique up to the order of the factors.

With the introduction mathematical notation and variables at the end of the 15th century, it became common to consider the multiplication of numbers that are either unspecified (coefficients and parameters), or to be found (unknowns). These multiplications that cannot be effectively performed are called products. For example, in the linear equation   the term   denotes the product of the coefficient   and the unknown  

Later and essentially from the 19th century on, new binary operations have been introduced, which do not involve numbers at all, and have been called products; for example, the dot product. Most of this article is devoted to such non-numerical products.

Product of a sequence

edit

The product operator for the product of a sequence is denoted by the capital Greek letter pi Π (in analogy to the use of the capital Sigma Σ as summation symbol).[1] For example, the expression   is another way of writing  .[2]

The product of a sequence consisting of only one number is just that number itself; the product of no factors at all is known as the empty product, and is equal to 1.

Commutative rings

edit

Commutative rings have a product operation.

Residue classes of integers

edit

Residue classes in the rings   can be added:

 

and multiplied:

 

Convolution

edit
 
The convolution of the square wave with itself gives the triangular function

Two functions from the reals to itself can be multiplied in another way, called the convolution.

If

 

then the integral

 

is well defined and is called the convolution.

Under the Fourier transform, convolution becomes point-wise function multiplication.

Polynomial rings

edit

The product of two polynomials is given by the following:

 

with

 

Products in linear algebra

edit

There are many different kinds of products in linear algebra. Some of these have confusingly similar names (outer product, exterior product) with very different meanings, while others have very different names (outer product, tensor product, Kronecker product) and yet convey essentially the same idea. A brief overview of these is given in the following sections.

Scalar multiplication

edit

By the very definition of a vector space, one can form the product of any scalar with any vector, giving a map  .

Scalar product

edit

A scalar product is a bi-linear map:

 

with the following conditions, that   for all  .

From the scalar product, one can define a norm by letting  .

The scalar product also allows one to define an angle between two vectors:

 

In  -dimensional Euclidean space, the standard scalar product (called the dot product) is given by:

 

Cross product in 3-dimensional space

edit

The cross product of two vectors in 3-dimensions is a vector perpendicular to the two factors, with length equal to the area of the parallelogram spanned by the two factors.

The cross product can also be expressed as the formal[a] determinant:

 

Composition of linear mappings

edit

A linear mapping can be defined as a function f between two vector spaces V and W with underlying field F, satisfying[3]

 

If one only considers finite dimensional vector spaces, then

 

in which bV and bW denote the bases of V and W, and vi denotes the component of v on bVi, and Einstein summation convention is applied.

Now we consider the composition of two linear mappings between finite dimensional vector spaces. Let the linear mapping f map V to W, and let the linear mapping g map W to U. Then one can get

 

Or in matrix form:

 

in which the i-row, j-column element of F, denoted by Fij, is fji, and Gij=gji.

The composition of more than two linear mappings can be similarly represented by a chain of matrix multiplication.

Product of two matrices

edit

Given two matrices

  and  

their product is given by

 

Composition of linear functions as matrix product

edit

There is a relationship between the composition of linear functions and the product of two matrices. To see this, let r = dim(U), s = dim(V) and t = dim(W) be the (finite) dimensions of vector spaces U, V and W. Let   be a basis of U,   be a basis of V and   be a basis of W. In terms of this basis, let   be the matrix representing f : U → V and   be the matrix representing g : V → W. Then

 

is the matrix representing  .

In other words: the matrix product is the description in coordinates of the composition of linear functions.

Tensor product of vector spaces

edit

Given two finite dimensional vector spaces V and W, the tensor product of them can be defined as a (2,0)-tensor satisfying:

 

where V* and W* denote the dual spaces of V and W.[4]

For infinite-dimensional vector spaces, one also has the:

The tensor product, outer product and Kronecker product all convey the same general idea. The differences between these are that the Kronecker product is just a tensor product of matrices, with respect to a previously-fixed basis, whereas the tensor product is usually given in its intrinsic definition. The outer product is simply the Kronecker product, limited to vectors (instead of matrices).

The class of all objects with a tensor product

edit

In general, whenever one has two mathematical objects that can be combined in a way that behaves like a linear algebra tensor product, then this can be most generally understood as the internal product of a monoidal category. That is, the monoidal category captures precisely the meaning of a tensor product; it captures exactly the notion of why it is that tensor products behave the way they do. More precisely, a monoidal category is the class of all things (of a given type) that have a tensor product.

Other products in linear algebra

edit

Other kinds of products in linear algebra include:

Cartesian product

edit

In set theory, a Cartesian product is a mathematical operation which returns a set (or product set) from multiple sets. That is, for sets A and B, the Cartesian product A × B is the set of all ordered pairs (a, b)—where a ∈ A and b ∈ B.[5]

The class of all things (of a given type) that have Cartesian products is called a Cartesian category. Many of these are Cartesian closed categories. Sets are an example of such objects.

Empty product

edit

The empty product on numbers and most algebraic structures has the value of 1 (the identity element of multiplication), just like the empty sum has the value of 0 (the identity element of addition). However, the concept of the empty product is more general, and requires special treatment in logic, set theory, computer programming and category theory.

Products over other algebraic structures

edit

Products over other kinds of algebraic structures include:

A few of the above products are examples of the general notion of an internal product in a monoidal category; the rest are describable by the general notion of a product in category theory.

Products in category theory

edit

All of the previous examples are special cases or examples of the general notion of a product. For the general treatment of the concept of a product, see product (category theory), which describes how to combine two objects of some kind to create an object, possibly of a different kind. But also, in category theory, one has:

Other products

edit
  • A function's product integral (as a continuous equivalent to the product of a sequence or as the multiplicative version of the normal/standard/additive integral. The product integral is also known as "continuous product" or "multiplical".
  • Complex multiplication, a theory of elliptic curves.

See also

edit

Notes

edit
  1. ^ Here, "formal" means that this notation has the form of a determinant, but does not strictly adhere to the definition; it is a mnemonic used to remember the expansion of the cross product.

References

edit
  1. ^ a b Weisstein, Eric W. "Product". mathworld.wolfram.com. Retrieved 2020-08-16.
  2. ^ "Summation and Product Notation". math.illinoisstate.edu. Retrieved 2020-08-16.
  3. ^ Clarke, Francis (2013). Functional analysis, calculus of variations and optimal control. Dordrecht: Springer. pp. 9–10. ISBN 978-1447148203.
  4. ^ Boothby, William M. (1986). An introduction to differentiable manifolds and Riemannian geometry (2nd ed.). Orlando: Academic Press. p. 200. ISBN 0080874398.
  5. ^ Moschovakis, Yiannis (2006). Notes on set theory (2nd ed.). New York: Springer. p. 13. ISBN 0387316094.

Bibliography

edit