In mathematics, a planar lamina (or plane lamina[1]) is a figure representing a thin, usually uniform, flat layer of the solid. It serves also as an idealized model of a planar cross section of a solid body in integration.

Planar laminas can be used to determine moments of inertia, or center of mass of flat figures, as well as an aid in corresponding calculations for 3D bodies.

Definition

edit

A planar lamina is defined as a figure (a closed set) D of a finite area in a plane, with some mass m.[2]

This is useful in calculating moments of inertia or center of mass for a constant density, because the mass of a lamina is proportional to its area. In a case of a variable density, given by some (non-negative) surface density function   the mass   of the planar lamina D is a planar integral of ρ over the figure:[3]

 

Properties

edit

The center of mass of the lamina is at the point

 

where   is the moment of the entire lamina about the y-axis and   is the moment of the entire lamina about the x-axis:

 
 

with summation and integration taken over a planar domain  .

Example

edit
 

Find the center of mass of a lamina with edges given by the lines     and   where the density is given as  .

For this the mass   must be found as well as the moments   and  .

Mass is   which can be equivalently expressed as an iterated integral:

 

The inner integral is:

 
 
 
 

Plugging this into the outer integral results in:

 

Similarly are calculated both moments:

 

with the inner integral:

 
 
 

which makes:

 

and

 

Finally, the center of mass is

 

References

edit
  1. ^ Atkins, Tony; Escudier, Marcel (2013), "Plane lamina", A Dictionary of Mechanical Engineering (1 ed.), Oxford University Press, doi:10.1093/acref/9780199587438.001.0001, ISBN 9780199587438, retrieved 2021-06-08
  2. ^ "Planar Laminae", WolframAlpha, retrieved 2021-03-09
  3. ^ "Lamina". MathWorld. Retrieved 2021-03-09.