Peavey EVH Wolfgang

The Peavey EVH Wolfgang guitar series is a collaboration between guitarist Eddie Van Halen and Hartley Peavey's company, Peavey Electronics (cap.12 from book "Peavey Guitars: The Authorized American History" ). The EVH stands for "Eddie Van Halen" while Wolfgang is the name of Eddie Van Halen's son.

Peavey EVH Wolfgang
Two custom models of the Peavey EVH Wolfgang.
Manufacturer	Peavey
Period	1996–2004
Colors available
Gloss Black, Gloss Ivory, Vintage Gold, Seafoam Green, Transparent Sunburst, Transparent Amber, Transparent Red, Transparent Purple, Transparent Green, Transparent Blue, Transparent Cherryburst, Transparent Black Cherryburst (plus numerous other colors and graphics offered via the Peavey Custom Shop)

History

Since the late 1970s, when Van Halen regularly performed on the Pasadena club scene, and with the release of Van Halen's self-titled debut album, Eddie Van Halen's guitar tone—nicknamed the "Brown Sound" for being full yet distinctively aggressive and articulate—had been widely acclaimed. It immediately set a standard for guitarists all over the world.

To achieve the legendary "Brown Sound", Eddie Van Halen employed a variac to limit the voltage (down to 89v, from the 110v standard) of his Marshall guitar amplifier while still allowing the volume to be at its maximum. He also used a custom-assembled strat-like guitar, built from Boogie Bodies leftover parts he bought from Lynn Ellsworth, along with a PAF humbucker (taken from a Gibson ES-335) mounted directly to the guitar's body. Van Halen's infamous Frankenstein (a.k.a. the "Frankenstrat") guitar laid the groundwork for most of the custom guitars he played throughout the 1970s and 1980s.

Prior to working with Peavey, Van Halen had worked with and endorsed Charvel, Kramer and Music Man.

Production of the Peavey EVH Wolfgang began in late 1996 (after a year-long development process) and lasted until 2004, when Eddie Van Halen and Peavey parted amicably.

Production of the Wolfgang guitar (along with other Peavey models) occurred in a dedicated Leakesville, MS plant, today abandoned and disused, in the demolition but was moved to Meridian, MS in early 2003. Van Halen had also developed three amplifiers with Peavey's engineer James Brown, starting in 1991.

In 2009, Eddie Van Halen announced the release of a new Wolfgang guitar built by Fender but only carrying his own "EVH" brand label. The newer Wolfgang retains many of exactly the same attributes as its Peavey-built predecessor.

Models and specification

In some sense, the Peavey EVH Wolfgang guitar picked up where the Ernie Ball Music Man EVH model left off with the prototype design being made by Peavey Design Engineer/Luthier Jim DeCola (an amber quilted top model which still didn't have the Wolfgang headstock shape, but rather a Peavey classic one). On the second prototype, DeCola then developed the final body and headstock designs.

The Peavey logo design on the headstock was developed in collaboration with the Art Center College of Design in Pasadena, with two wood samples of the headstock and confirmation from Eddie..

Another innovative feature DeCola designed was the recessed truss rod adjustment wheel. Recessing the adjustment wheel into the neck provided a stronger neck joint as well as ease of adjustment like his previous model. This design has since been adopted by Fender, Jackson, Charvel, ESP, Schecter, and many other brands. The body was made of basswood and often had (like its predecessor) a maple cap. This combination is considered by some, such as renowned luthier John Suhr, "the Holy Grail of tone."

The Ernie Ball model, however, used a 1/8" figured maple cap, which is itself less likely to change the overall effect of the tonewood. Peavey Wolfgangs had maple caps ranging from 1/4" to 5/8".

The guitar had a Floyd Rose vibrato system, built by Ping, which lowers pitch only as the device plate sits on the body top (similarly to the Ernie Ball Music Man EVH model) but added a d-Tuna device on the low E-string, which allowed that string to be instantly tuned to and from D (a former design of this device, named "The Willie" was filed for patent by Eddie in 1997, but later abandoned in 1998).

Peavey EVH Wolfgang

Eddie Van Halen playing a sunburst first year quilt top model in 2004.

The original and top-of-the-line model, made in the USA, the guitar featured an arched (carved) top, body binding, two knobs (volume and tone), three-way pickup toggle switch, two Peavey/EVH-designed humbucker pickups, oil-finished bird's eye maple neck and fingerboard with dual graphite reinforcement rods, ten-degree tilt headstock, and Schaller mini M6 tuners (with either pearloid or ivory colored buttons).

Two base versions were offered: a solid basswood body model and a solid basswood body with a maple top model (the maple cap was 5/8" before carving). Each version could come with either a licensed Floyd Rose tremolo with d-Tuna or a tune-o-matic bridge and hard tailpiece. Solid basswood Wolfgangs were offered in gloss ivory and gloss black; solid basswood/maple cap Wolfgangs were offered in various transparent figured flame only maple finishes (sunburst, amber, red, purple, blue, green, cherryburst, and black cherryburst) as well as vintage gold and seafoam green. Very occasionally a rejected maple top was painted either gloss black or gloss ivory.

Peavey EVH Wolfgang Special

Peavey and Eddie Van Halen's attempt to make a "budget" version of the Wolfgang that didn't compromise quality in parts or craftsmanship. Made in the USA in 1998. It featured a flat top, one knob (volume), three-way pickup toggle switch, two Peavey/EVH-designed humbucker pickups, licensed Floyd Rose tremolo with d-Tuna, oil-finished hard rock maple neck and fingerboard with dual graphite reinforcement rods, straight headstock, and chrome tuners.

Two base versions were offered: a solid basswood model and a solid basswood/maple cap model (the maple cap was 1/4"). Each version could come with either a licensed Floyd Rose tremolo with d-Tuna or a tune-o-matic bridge and hard tailpiece. Solid basswood Wolfgang Specials were offered in gloss ivory, gloss black, vintage gold, gloss purple, and sunburst; solid basswood/maple cap Wolfgangs were offered in various transparent figured flame only maple finishes (amber, red, purple, green, sunburst, and black cherryburst). Very occasionally a rejected maple top was painted gloss black.

Peavey EVH Wolfgang & Wolfgang Special (Custom Shop)

The Peavey EVH Wolfgang Custom Shop operated from January 2002 to December 2004. It was run by four highly talented craftsman, each with a different area of specialty. The Custom Shop launched with a contest held via Van Halen's. Twelve unique Wolfgangs were given away throughout 2002—one every month.

Approximately 285 Custom Shop guitars were produced in Leakesville, of which 92 of these were made to fill specific orders while the rest were built for the "Wolfgang Vault".

Another 130 specific customer orders were produced in Meridian after mid-2003 as well as another 70 guitars, many of which are not really true Customs as they were using up remaining materials inventory. Some guitars where the only upgrade is a rosewood fretboard is technically called a Custom Shop, but most really are not. Eddie didn't want the production guitars to have rosewood fretboards so the only way they could produce them like this was to call them Custom Shop guitars.

Thus, approximately 500 Custom Shop guitars were built from 2002 through 2004, some 220 of them being specific customer orders (Approximately 50 of those were ordered and/or purchased by guitar collector Geoff Knapp. These and many more are pictured at his website, Rock'N Roll Weekend).

Peavey had an area at their website for people to "build" (and order) their own Custom Shop guitars. The basic options that anyone could select were; the body wood: top wood; fretboard wood; fretboard inlays; bridge type; hardware color; top color or graphic and matching/standard headstock.

The body wood options were basswood (standard), alder, ash, mahogany, and even koa or korina which weren't standard options. Bridge options were a stop tail bridge or a Floyd Rose Tremolo system in chrome (standard), gold or black. The Special models came with the birdseye (not hard rock) maple neck, which was an upgrade from a production special. For the fretboard, one could select Birdseye Maple (standard), Rosewood or Ebony. For the inlays they had pearl or black dots (standard), EVH Blocks, Tribal Flames, Skulls or no inlays at all. For the top you could select flame maple (standard), quilted maple, koa or none (solid body construction). There were about 30 colors to choose from including graphics and a custom graphic option.

Peavey EVH Wolfgang Special EXP

Offered from 2002 to 2004, the Peavey EVH Wolfgang Special EXP was a Korean-made version of the Wolfgang. It contained no markings to differentiate it from USA models, but there were several deviations. The most obvious difference between the Korean and USA Special models are quilt only tops (Korean) vs. flame only tops (USA).

The Wolfgang Special EXP had a 1/20" quilt only maple veneer top and came in four transparent colors: amber, maroon, blue, and sunburst. The body was made of solid basswood and had a masked "faux" binding. Like the USA Wolfgang Special it featured a flat top, one knob (volume), three-way pickup toggle switch, Peavey/EVH-designed humbucker pickups like USA models, licensed Floyd Rose tremolo with D-Tuna (d-tuner device), hard rock maple neck and fingerboard, straight headstock, and Grover mini tuners (a feature unique to this model). Some aspects of the Wolfgang Special EXP were different to its USA counterparts: the neck had no graphite reinforcement rods and was finished with a satin polyester layer.

A hard tail version was not offered. Another detail, aesthetically, of the Korean version was the position of the "Special" decal on the headstock. Same position as the American special, but slightly shifted inward in the Korean version. The first Korean guitars do not have the EVH signature printed on the back of the headstock, because the relevant equipment arrived after production had started.

Specifications details and singularities (pickups, switching, vibrato unit, colours)

The pickups on the US-made guitars were manufactured by Peavey and, due to the fact that they used different enamel wire types, the neck pickup actually had a higher impedance than the bridge one (approximately 16.22 kΩ on the neck and 13.87 kΩ on the bridge one), which is uncommon. The EXP models (made in Korea) had pickups made to these specs, but not made in the US.

The 3-way switch works in an unconventional way, to the preference of Eddie Van Halen (similar to rotating a Les Paul switch 180 degrees), who mentioned needing to faster switch to the bridge position for soloing. Hence, the "up" position enables the bridge pickup whereas the "down" position enables the neck pickup; the middle position enables both pickups connected in parallel.

The vibrato unit was made by Ping to the specifications given by Peavey (string spacing: 10.8mm, string spread: 54mm or 2 7/8", stud spacing: 74mm or 2 15/16", post insert size: 8mm, radius 355mm or 14", brass block depth: 33mm). On the EXP models, a low-budget version built in Korea was installed, more similar to a Schaller unit.

Two solid finishes which had maple tops (seafoam green and solid gold) on the Standard models gained some preference due to their exquisite looks. In Jim DeCola's words: "The first batch of gold guitars had a different shade of gold than most others as the paint vendor changed. Maybe the first 50 or so. The finishing department blamed a mistake on the paint vendor who supplied the gold and consequently changed the supplier after about 50 or so guitars. The original gold had a warmer, more Gibson bronze cast compared to the following production gold guitars."

There are a few prototype colours on serial production guitars, with as low as 1 guitar with a certain colour, experiments that Peavey made while in production. One of the examples of this is a dark gloss oxblood finish with a black binding, now owned by an Austin guitar dealer (bearing the patent number but no serial). Some of these had black or gold hardware.

Serial numbers

USA-built Peavey Wolfgangs typically had serial numbers that started with "91" followed by six more digits. Late-run USA Wolfgangs had serial numbers that started with "51". A very few prototype models had serial numbers that started with "1". Though Peavey Wolfgang owners have often sought to find a corroboration in the serial numbers of their guitars and the year in which each was built (similar to the system Gibson uses), there was no such information contained in the serial numbers. There was also no code specific to Custom Shop models.

Peavey Wolfgang serial numbers were stamped on the back of the headstock between the tuners. Eddie Van Halen's signature and the headstock patent number were both branded just below the serial number. Early Wolfgang models (1996–1998) contained the term "Pat. Pend." in place of the patent number. South Korean made Wolfgang Special QT models had serial numbers printed in black on the back of the headstock.

Sorting the serial numbers and their dates on the guitar's accompanying certificates, can state: Peavey Wolfgang's serials (made in USA, standard and special, with no difference) are not perfectly progressive. Geoff of rocknrollweekend.com comments:

Serial Numbers - I have looked at the dates on the build sheets of the original year guitars and compared them to the serial numbers. They are close, but not necessarily in order. I think that is because the serial numbers are pulled during production and the delivery date entered when the guitar is completed. A guitar that needed something reworked or was set to the side for some reason would have a later delivery date even though it had an earlier serial number."

By observation, we have, aproximately:

• from 91000001 to 91000643 - 1996,
• from 91001426 to 91004545 - 1997,
• from 91005978 to 91012389 - 1998,
• from 91014218 to 91021113 - 1999,
• from 91021120 to 91023507 - 2000,
• from 91023989 to 91027023 - 2001,
• from 91027601 to 91028061 - 2002,
• from 91029130 to end of production - 2003, 2004.
• all 51xxxxx - 2003, 2004.

The 91s were produced in the Leakesville, Mississippi, plant developed specifically to produce the Wolfgang, then moved production; the 51 serials were built in the main facility in Meridian, also in Mississippi.

Peavey HP Special

Shortly after the split with Eddie Van Halen, Peavey released the HP Special model (HP stands for Hartley Peavey, although the model was initially supposed to be named Carina) in 2005, with both American and Asian versions, a guitar that encompassed many of the characteristics of the Wolfgang (basswood body with optional contoured maple top, bolt-on maple neck with maple fingerboard, etc.), but was somewhat of a departure from the collaboration with the guitarist - an H-S-H pickup configuration option, a 5-bolt neck joint, and the headstock shape change, even if the Wolfgang headstock patent remained with Peavey.

Work with Fender - the Charvel Art Series and the EVH brand

In his last times with Peavey, Eddie Van Halen began working with Charvel to produce replicas of three of his striped guitar models, in black and white, yellow and black, and also the most common red, white, and black color scheme. During the Van Halen 2004 Tour, the guitarist played a different custom striped Charvel Art Series in a few songs of each concert, later autographing and auctioning them on eBay.

In 2007, under the supervision of master-builder Chip Ellis, a single run of 300 of his original Frankenstein guitar were made available by Fender under the EVH brand, in strict collaboration with Eddie Van Halen. The guitars were priced at $25,000, having a massive demand upon their arrival to the market.

After the 2007-08 Tour, and once again under the supervision of Chip Ellis, the evolution of the Wolfgang within the Fender group became available to the public, with the EVH Wolfgang® USA Edward Van Halen Signature (in 2008) and the EVH Wolfgang® Special (in 2010), both sporting the "bottle opener" shape, which is owned by Eddie Van Halen, unlike the old Peavey headstock. This was also designed by Jim DeCola who added Eddie and Hartley Peavey's names to the patent and then assigned it to Eddie so he could have ownership. The guitar inherits many of the Peavey characteristics, namely the woods, overall design, and pickups. Regarding these, Jim DeCola added: "I worked at Fender (Nashville) for 11 years after Peavey (...). They picked my brain a little before I realized they were trying to lure EVH away. I already discussed what I did with the pickups casually to coworkers. After the guitar was released, I got copies of the pickup specs and blueprints. They are the same specs.".

An amplifier series - the EVH 5150 III - and several instrument accessories and merchandise soon followed, all under the EVH brand.

Peavey HP2

In July 2017, during the Summer in Nashville, Peavey announced the release of the HP2 model, an instrument which has exactly the same appearance and specifications as the discontinued Wolfgang, with minor differences such as: different licensed Floyd Rose, corean made pickups with push/pull switch in the tone and volume knobs (for split-coil mode), the removal of the EVH Wolfgang inscription as well as the D-Tuna device, a different guitar case. From 2020 to the present, Wolfgangs are made in the Czech Republic and the first 800 or so guitars have NOS lettering behind the headstock, indicating the use of advanced materials in older American production.

External links

• Peavey Wolfgang operating guide from Peavey official

[4]

• Peavey Wolfgang Special operating guide from Peavey official

[5]

• Peavey Guitars: The Authorized American History [6]
• Mr. Geoff Knapp of California, is mentioned in the book "Peavey Guitars: The Authorized American History." In addition to being the world's foremost collector of Peavey Wolfgang guitars, by number and models, he has also been a Peavey dealer. So his website https://www.rocknrollweekend.com can be considered an absolutely authoritative and reliable source
• Project EVH [7]
• Interview With Barb Page Part 4 Peavey EVH Wolfgang Guitar [8]
• Peavey EVH catalog 1999 [9]
• Practical Guide To Peavey Guitars [10]
• Axebition Peavey Wolfgang [11]
• The Wolfgang Saga: How 3 Brands Built Eddie Van Halen's Signature Guitar [12]
• The Story of Eddie Van Halen's Signature Wolfgang Guitar [13]
• Peavey Wolfgang US vs Korean Review [14]
• NAMM 2000 Prototype Peavey Wolfgang Deluxe made for Eddie Van Halen [15]
• Talking Peavey Wolfgang Guitars with designer Jim Decola [16]
• How Eddie Van Halen’s “endless pursuit” of perfection changed the guitar industry forever [17]
• Here Are All the Eddie Van Halen Guitars and Gear You Can See at the Rock Hall [18]
• NAMM flashback: Watch Eddie Van Halen shred classic Van Halen riffs as he unveils and demos his Peavey EVH Wolfgang signature guitar in 1996 [19]