Iron(I) hydride, systematically named iron hydride and poly(hydridoiron) is a solid inorganic compound with the chemical formula (FeH)
n (also written ([FeH])
n or FeH). It is both thermodynamically and kinetically unstable toward decomposition at ambient temperature, and as such, little is known about its bulk properties.
-2D.png)
| |||
| |||
| Names | |||
|---|---|---|---|
| Systematic IUPAC name
Hydridoiron(3•) | |||
| Identifiers | |||
3D model (JSmol)
|
|||
CompTox Dashboard (EPA)
|
|||
| |||
| |||
| Properties | |||
| FeH3• | |||
| Molar mass | 56.853 g mol−1 | ||
| Thermochemistry | |||
Std enthalpy of
formation (ΔfH⦵298) |
450.6 kJ mol−1[citation needed] | ||
| Related compounds | |||
Related compounds
|
Iron hydrides, FeH2 CrH, CaH, MgH | ||
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
| |||
-3D-vdW.png)
-3D-balls.png)
Iron(I) hydride is the simplest polymeric iron hydride. Due to its instability, it has no practical industrial uses. However, in metallurgical chemistry, iron(I) hydride is fundamental to certain forms of iron-hydrogen alloys.
Nomenclature
editThe systematic name iron hydride, a valid IUPAC name, is constructed according to the compositional nomenclature. However, as the name is compositional in nature, it does not distinguish between compounds of the same stoichiometry, such as molecular species, which exhibit distinct chemical properties. The systematic names poly(hydridoiron) and poly[ferrane(1)], also valid IUPAC names, are constructed according to the additive and electron-deficient substitutive nomenclatures, respectively. They do distinguish the titular compound from the others.
Hydridoiron
editHydridoiron, also systematically named ferrane(1), is a related compound with the chemical formula FeH (also written [FeH]). It is also unstable at ambient temperature with the additional propensity to autopolymerize, and so cannot be concentrated.
Hydridoiron is the simplest molecular iron hydride. In addition, it may be considered to be the iron(I) hydride monomer. It has been detected in isolation only in extreme environments, like trapped in frozen noble gases, in the atmosphere of cool stars, or as a gas at temperatures above the boiling point of iron. It is assumed to have three dangling valence bonds, and is therefore a free radical; its formula may be written FeH3• to emphasize this fact.
At very low temperatures (below 10 K), FeH may form a complex with molecular hydrogen FeH·H2.[1]
Hydridoiron was first detected in the laboratory by B. Kleman and L. Åkerlind in the 1950s.[citation needed]
Properties
editRadicality and acidity
editA single electron of another atomic or molecular species can join with the iron centre in hydridoiron by substitution:
- [FeH] + RR → [FeHR] + ·R
Because of this capture of a single electron, hydridoiron has radical character. Hydridoiron is a strong radical.
An electron pair of a Lewis base can join with the iron centre by adduction:
- [FeH] + :L → [FeHL]
Because of this capture of an adducted electron pair, hydridoiron has Lewis-acidic character. It should be expected that iron(I) hydride has significantly diminished radical properties, but has similar acid properties, however reaction rates and equilibrium constants are different.
Structure
edit
In iron(I) hydride, the atoms form a network, individual atoms being interconnected by covalent bonds. Since it is a polymeric solid, a monocrystalline sample is not expected to undergo state transitions, such as melting and dissolution, as this would require the rearrangement of molecular bonds and consequently, change its chemical identity. Colloidal crystalline samples, wherein intermolecular forces are relevant, are expected to undergo state transitions.
Iron(I) hydride adopts a double hexagonal close-packed crystalline structure with the P63/mmc space group, also referred to as epsilon-prime iron hydride in the context of the iron-hydrogen system. It is predicted to exhibit polymorphism, transitioning at some temperature below −173 °C (−279 °F) to a face-centred crystalline structure with the Fm3m space group.
Electromagnetic properties
editFeH is predicted to have a quartet and a sextet ground states.
The FeH molecule has at least four low energy electronic states caused by the non bonding electron taking up positions in different orbitals: X4Δ, a6Δ b6Π,[2] and c6Σ+.[3] Higher energy states are termed B4Σ−, C4Φ, D4Σ+, E4Π, and F4Δ.[4] Even higher levels are labelled G4Π and H4Δ from the quartet system, and d6Σ−, e6Π, f6Δ, and g6Φ.[2] In the quartet states the inner quantum number J takes on values 1/2, 3/2, 5/2, and 7/2.
| band name |
wavelength nm |
wavenumber cm−1 |
transition |
|---|---|---|---|
| Wing-Ford | 989.6 | 10100 | F4Δ—X4Δ |
| blue | 490 | 20408 | g6Φ—a6Δ |
| green | 530 | 18867 | e6Π—a6Δ |
FeH has an important absorption band (called the Wing-Ford band) in the near infrared with a band edge at 989.652 nm and a maximum absorption at 991 nm.[5] It also has lines in the blue at 470 to 502.5 nm and in green from 520 to 540 nm.[6]
The small isotope shift of the deuterated FeD compared to FeH at this wavelength shows that the band is due to a (0,0) transition from the ground state, namely F4Δ—X4Δ.[7]
Various other bands exists in each part of the spectrum due to different vibrational transitions.[8] The (1,0) band, also due to F4Δ—X4Δ transitions, is around 869.0 nm and the (2,0) band around 781.8 nm.[4]
Within each band there are a great number of lines. These are due to transition between different rotational states. The lines are grouped into subbands 4Δ7/2—4Δ7/2 (strongest) and 4Δ5/2—4Δ5/2, 4Δ3/2—4Δ3/2 and 4Δ1/2—4Δ1/2. The numbers like 7/2 are values for Ω the spin component.[8] Each of these has two branches P and R, and some have a Q branch. Within each there is what is called Λ splitting that results in a lower energy lines (designated "a") and higher energy lines (called "b"). For each of these there is a series of spectral lines dependent on J, the rotational quantum number, starting from 3.5 and going up in steps of 1. How high J gets depends on the temperature. In addition there are 12 satellite branches 4Δ7/2—4Δ5/2, 4Δ5/2—4Δ3/2, 4Δ3/2—4Δ1/2, 4Δ5/2—4Δ7/2, 4Δ3/2—4Δ5/2 and 4Δ1/2—4Δ3/2 with P and R branches.[5]
Some lines are magnetically sensitive, such as 994.813 and 995.825 nm. They are broadened by the Zeeman effect yet others in the same band are insensitive to magnetic fields like 994.911 and 995.677 nm.[9] There are 222 lines in the (0-0) band spectrum.[10]
Occurrence in outer space
editIron hydride is one of the few molecules found in the Sun.[11] Lines for FeH in the blue-green part of the solar spectrum were reported in 1972, including many absorption lines in 1972.[6] Also sunspot umbras show up the Wing-Ford band prominently.[8]
Bands for FeH (and other hydrides of transition metals and alkaline earths) show up prominently in the emission spectra for M dwarfs and L dwarfs, the hottest kind of brown dwarf. For cooler T dwarfs, the bands for FeH do not appear,[12] probably due to liquid iron clouds blocking the view of the atmosphere, and removing it from the gas phase of the atmosphere. For even cooler brown dwarfs (<1350 K), signals for FeH reappear, which is explained by the clouds having gaps.[13]
The explanation for the kind of stars that the FeH Wing-Ford band appears in, is that the temperature is around 3000 K and pressure is sufficient to have a large number of FeH molecules formed. Once the temperature reaches 4000 K as in a K dwarf the line is weaker due to more of the molecules being dissociated. In M giant red giants the gas pressure is too low for FeH to form.[7]
Elliptical and lenticular galaxies also have an observable Wing-Ford band, due to a large amount of their light coming from M dwarfs.[8]
In 2021, traces of FeH was confirmed to be present in the atmosphere of hot Jupiter WASP-79b.[14]
Production
editKleman and Åkerlind first produced FeH in the laboratory by heating iron to 2600 K in a King-type furnace under a thin hydrogen atmosphere.
Molecular FeH can also be obtained (together with FeH2 and other species) by vaporizing iron in an argon-hydrogen atmosphere and freezing the gas on a solid surface at about 10 K (-263 °C). The compound can be detected by infrared spectroscopy, and about half of it disappears when the sample is briefly warmed to 30 K.[15] A variant technique uses pure hydrogen atmosphere condensed at 4 K.[1]
This procedure also generates molecules that were thought to be FeH3 (ferric hydride) but were later assigned to an association of FeH and molecular hydrogen H2.[16]
Molecular FeH has been produced by the decay of 57Co embedded in solid hydrogen. Mössbauer spectroscopy revealed an isomer shift of 0.59 mm/s compared with metallic iron and quadrupole splitting of 2.4 mm/s.[17] FeH can also be produced by the interaction of Iron pentacarbonyl vapour and atomic hydrogen in a microwave discharge.[18]
See also
editReferences
edit- ^ a b Wang, Xuefeng; Andrews, Lester (2009). "Infrared Spectra and Theoretical Calculations for Fe, Ru, and Os Metal Hydrides and Dihydrogen Complexes". The Journal of Physical Chemistry A. 113 (3): 551–563. Bibcode:2009JPCA..113..551W. doi:10.1021/jp806845h. PMID 19099441.
- ^ a b Hullah, Daniel F.; Burrow, Richard F.; Brown, John M. (September 1999). "Low-lying energy levels of the FeH molecule". Molecular Physics. 97 (1–2): 93–103. Bibcode:1999MolPh..97...93H. doi:10.1080/00268979909482812.
- ^ Goodridge, Damian M.; Hullah, Daniel F.; Brown, John M. (8 January 1998). "Rotational analysis and assignment of the 630 nm band system of FeH to the e 6Π–c 6Σ1 transition". Journal of Chemical Physics. 108 (2): 428–435. Bibcode:1998JChPh.108..428G. doi:10.1063/1.475404.
- ^ a b Ram, R. S.; Bernath, P. F.; Davis, S. P. (10 May 1996). "Fourier Transform Emission Spectroscopy of the g4Δ–a4Δ System of FeF" (PDF). Journal of Molecular Spectroscopy. 179 (2): 297. Bibcode:1996JMoSp.179..282R. doi:10.1006/jmsp.1996.0207. Archived from the original (PDF) on 10 March 2005.
- ^ a b Phillips, J. G.; Davis, S. P.; Lindgren, B.; Balfour, W. J. (December 1987). "The near-infrared spectrum of the FeH molecule". Astrophysical Journal Supplement Series. 65: 721–778. Bibcode:1987ApJS...65..721P. doi:10.1086/191241. ISSN 0067-0049.
- ^ a b Carroll, P. K.; McCormack (1 October 1972). "The Spectrum of FeH: Laboratory and Solar Identification". Astrophysical Journal Letters. 177: L33–L36. Bibcode:1972ApJ...177L..33C. doi:10.1086/181047.
- ^ a b Nordh, H. L.; Lindgren, B.; Wing, R. F. (April 1977). "A proposed identification of FeH in the spectra of M dwarfs and S stars". Astronomy and Astrophysics. 56 (1–2): 1–6. Bibcode:1977A&A....56....1N.
- ^ a b c d Schiavon, Ricardo P.; Barbuy, B.; Singh, Patan D. (20 July 1997). "The FeH Wing-Ford Band in Spectra of M Stars". The Astrophysical Journal. 484 (1). The American Astronomical Society: 499–510. arXiv:astro-ph/9701186. Bibcode:1997ApJ...484..499S. doi:10.1086/304332. S2CID 118896684.
- ^ Reiners, Ansgar; Schmitt, Jürgen H. M. M.; Liefke, C. (2007). "Rapid magnetic flux variability on the flare star CN Leonis" (PDF). Astronomy and Astrophysics. 466 (2): L13–L16. arXiv:astro-ph/0703172. Bibcode:2007A&A...466L..13R. doi:10.1051/0004-6361:20077095. S2CID 17926213.
- ^ Mulchaey, John S. (February 1989). "The Rotational Temperature of the FeH Molecule in a Sunspot". Publications of the Astronomical Society of the Pacific. 101 (636). The University of Chicago Press: 211–214. Bibcode:1989PASP..101..211M. doi:10.1086/132424. JSTOR 40679297.
- ^ Sinha, K. (1991). "Molecules in the sun". Proceedings of the Astronomical Society of Australia. 9 (1). Astronomical Society of Australia: 32. Bibcode:1991PASA....9...32S. doi:10.1017/S1323358000024814. S2CID 118585000. about 11 different molecules
- ^ Cowen, Ron (4 July 1998). "So cool, and some are still stars". Science News.
- ^ Burgasser, Adam J.; Marley, Mark S.; Ackerman, Andrew S.; Saumon, Didier; Lodders, Katharina; Dahn, Conard C.; Harris, Hugh C.; Kirkpatrick, J. Davy (1 June 2002). "Evidence of cloud disruption in the L/T dwarf transition". The Astrophysical Journal. 571 (2): L151–L154. arXiv:astro-ph/0205051. Bibcode:2002ApJ...571L.151B. doi:10.1086/341343. S2CID 17929123.
- ^ Foote, Trevor O.; Lewis, Nikole K.; Kilpatrick, Brian M.; Goyal, Jayesh M.; Bruno, Giovanni; Wakeford, Hannah R.; Robbins-Blanch, Nina; Kataria, Tiffany; MacDonald, Ryan J.; López-Morales, Mercedes; Sing, David K.; Mikal-Evans, Thomas; Bourrier, Vincent; Henry, Gregory; Buchhave, Lars A. (2022), "The Emission Spectrum of the Hot Jupiter WASP-79b from HST/WFC3", The Astronomical Journal, 163 (1): 7, arXiv:2107.14334, Bibcode:2022AJ....163....7F, doi:10.3847/1538-3881/ac2f4a, S2CID 236635028
- ^ Chertihin, George V.; Andrews, Lester (1995). "Infrared spectra of FeH, FeH2, and FeH3 in solid argon". Journal of Physical Chemistry. 99 (32): 12131–12134. doi:10.1021/j100032a013.
- ^ Andrews, Lester (30 January 2004). "Matrix infrared spectra and density functional calculations of transition metal hydrides and dihydrogen complexes". Chemical Society Reviews. 33 (2): 123–132. doi:10.1039/B210547K. PMID 14767507.
- ^ Pasternak, M.; Van Der Heyden, M.; Langouche, G. (February 1984). "The characterization of FeH molecules by Mössbauer spectroscopy". Chemical Physics Letters. 104 (4): 398–400. Bibcode:1984CPL...104..398P. doi:10.1016/0009-2614(84)80087-1.
- ^ Brown, John M.; Körsgen, Helga; Beaton, Stuart P.; Evenson, Kenneth M. (2006). "The rotational and fine-structure spectrum of FeH, studied by far-infrared laser magnetic resonance". The Journal of Chemical Physics. 124 (23). American Institute of Physics: 234309. Bibcode:2006JChPh.124w4309B. doi:10.1063/1.2198843. PMID 16821920. S2CID 31889615.
Extra reading
edit- FeH Bibliography from ExoMol