1.
|
Design and Preparation of Two ReBCO-CORC® Cable-In-Conduit Conductors for Fusion and Detector Magnets
/ Mulder, T (Twente U., Enschede ; CERN) ; van der Laan, D (Advanced Conductor Technologies, Boulder ; Colorado U.) ; Weiss, J D (Advanced Conductor Technologies, Boulder ; Colorado U.) ; Dudarev, A (CERN) ; Dhallé, M (Twente U., Enschede) ; ten Kate, H H J (CERN)
Two new ReBCO-CORC® based cable-in-conduit conductors (CICC) are developed by CERN in collaboration with ACT-Boulder. Both conductors feature a critical current of about 80 kA at 4.5 K and 12 T. [...]
2017 - 8 p.
- Published in : IOP Conf. Ser. Mater. Sci. Eng. 279 (2017) 012033
Fulltext: PDF;
In : 2017 Cryogenic Engineering Conference and International Cryogenic Materials Conference, Madison, WI, USA, 9 - 13 Jul 2017, pp.012033
|
|
2.
|
Development of Joint Terminals for a New Six-Around-One ReBCO-CORC Cable-in-Conduit Conductor Rated 45 kA at 10T/4K
/ Mulder, Tim (Twente U., Enschede) ; Dudarev, Alexey (CERN) ; Mentink, Matthias (CERN) ; Dhalle, Marc (Twente U., Enschede) ; Ten Kate, Herman (CERN)
The European Organization for Nuclear Research (CERN) is developing a six-around-one conductor on round core (CORC)-strand-based cable-in-conduit conductor (CICC) for use in detector and other large magnet systems. The CICC comprises six ReBCO-CORC strands helically wound around a central tube or rod and inserted in a square aluminum jacket. [...]
2016 - 1 p.
- Published in : IEEE Trans. Appl. Supercond. 26 (2016) 4801704
In : 12th European Conference on Applied Superconductivity, Lyon, France, 06 - 10 Sep 2015, pp.4801704
|
|
3.
|
Design and Manufacturing of a 45 kA at 10 T REBCO-CORC Cable-in-Conduit Conductor for Large-Scale Magnets
/ Mulder, Tim (CERN) ; Dudarev, Alexey (CERN) ; Mentink, Matthias (CERN) ; Silva, Helder (CERN) ; van der Laan, Danko (Colorado U.) ; Dhalle, Marc (Twente U., Enschede) ; ten Kate, Herman (CERN)
The European Organization for Nuclear Research (CERN) is developing high-current ReBCO-CORC strand-based cables for use in future large-scale detector magnets. A six-around-one, forced flow gas-cooled ReBCO-CORC cable-in-conduit conductor (CICC) is envisioned for application in magnets operating in the 20-40 K temperature range. [...]
2016 - 5 p.
- Published in : IEEE Trans. Appl. Supercond. 26 (2016) 4803605
In : 24th International Conference on Magnet Technology, Seoul, Korea, 18 - 23 Oct 2015, pp.4803605
|
|
4.
|
|
5.
|
Demonstration of the ReBCO CORC 47kA@10T/4.2K Cable-In-Conduit-Conductor and its Joint Terminals at 4.5 and 77 K
/ Mulder, T (CERN) ; Fleiter, J (CERN) ; Willering, G (CERN) ; Dudarev, A (CERN) ; Mentink, M (CERN) ; Dhallé, M (Twente U., Enschede) ; Kate, H Ten (CERN)
CERN has designed and manufactured the first 1.7-m-long fully operational ReBCO CORC cable-in-conduit conductor. This CORC cable-in-conduit conductor is envisioned for use in large, high current and high energy magnets. [...]
2017 - 4 p.
- Published in : IEEE Trans. Appl. Supercond. 27 (2017) 4801004
In : Applied Superconductivity Conference, Denver, CO, USA, 4 - 9 Sep 2016, pp.4801004
|
|
6.
|
Optimized and practical electrical joints for CORC type HTS cables
/ Mulder, T (CERN ; Twente U., Enschede) ; Dudarev, A (CERN) ; van der Laan, D C ; Mentink, M G T (CERN) ; Dhallé, M (Twente U., Enschede) ; ten Kate, H H J (CERN)
Within CERN the development of REBCO-CORC (Conductor On Round Core) type cables is pursued in view of possible application in future detector and accelerator magnets. An important issue is the design and qualification of terminations for connecting CORC cables mutually or to bus-bars. [...]
2015
- Published in : IOP Conf. Ser. Mater. Sci. Eng. 101 (2015) 012026
IOP Open Access article: PDF;
In : Advances in Cryogenic Engineering ‐ Materials: International Cryogenic Materials Conference, Tucson, AZ, USA, 28 Jun - 2 Jul 2015, pp.012026
|
|
7.
|
Performance Test of an 8 kA @ 10-T 4.2-K ReBCO-CORC Cable
/ Mulder, Tim (CERN) ; Dudarev, Alexey (CERN) ; Mentink, Matthias (CERN) ; van der Laan, Danko (Twente U., Enschede) ; Dhalle, Marc (NIST, Boulder) ; ten Kate, Herman (CERN)
CERN is developing high-current ReBCO conductor on round core (CORC) cables for application in future detector and accelerator magnets. A characterization test on a ReBCO-CORC cable sample and its joints is performed in the 10-T FRESCA cable test facility at CERN. [...]
2016 - 5 p.
- Published in : IEEE Trans. Appl. Supercond. 26 (2016) 4803705
In : 24th International Conference on Magnet Technology, Seoul, Korea, 18 - 23 Oct 2015, pp.4803705
|
|
8.
|
Introduction of CORC®wires: highly flexible, round high-temperature superconducting wires for magnet and power transmission applications
/ Weiss, Jeremy D (Unlisted, US, CO ; Colorado U.) ; Mulder, Tim (CERN ; Twente U., Enschede) ; ten Kate, Herman J (CERN ; Twente U., Enschede) ; van der Laan, Danko C (Unlisted, US, CO ; Colorado U.)
Conductor on Round Core (CORC®) technology has achieved a long sought-after benchmark by enabling the production of round, multifilament, (RE)Ba2Ca3O7-x coated conductors with practical current densities for use in magnets and power applications. Recent progress, including the demonstration of engineering current density beyond 300 Amm-2 at 4.2 K and 20 T, indicates that CORC® cables are a viable conductor for next generation high field magnets. [...]
2017
- Published in : Supercond. Sci. Technol. 30 (2017) 014002
|
|
9.
|
|
10.
|
Performance of first insert coil with REBCO CICC sub-size cable exceeding 6 kA at 21 T magnetic field
/ Zhou, Chao (Hefei, Inst. Plasma Phys. ; Twente U., Enschede) ; Jin, Huan (Hefei, Inst. Plasma Phys.) ; Fang, Zhen (CAS, HMFL, Hefei) ; Xiao, Guanyu (Hefei, Inst. Plasma Phys. ; Anhui U. Sci. Tech.) ; Ma, Hongjun (Hefei, Inst. Plasma Phys.) ; Liu, Fang (Hefei, Inst. Plasma Phys.) ; Liu, Huajun (Hefei, Inst. Plasma Phys.) ; Ma, Tao (Xian Jiaotong U.) ; Tan, Yunfei (Hua-Zhong U. Sci. Tech.) ; Chen, Wenge (CAS, HMFL, Hefei) et al.
The Institute of Plasma Physics at the Chinese Academy of Sciences is developing the REBCO cable in conduit conductor (CICC) technology for applications in next-generation nuclear fusion devices. The aim is to develop a CICC comprised of six REBCO sub-cables to satisfy the requirements of operation with a current of around 40 kA and a peak field of up to 20 T. [...]
2022 - 9 p.
- Published in : Supercond. Sci. Technol. 35 (2022) 114003
|
|