CERN Accelerating science

Published Articles
Title Coil manufacturing process of the first 1-m-long Canted–Cosine–Theta (CCT) model magnet at PSI
Author(s) Montenero, Giuseppe (PSI, Villigen) ; Auchmann, Bernhard (CERN ; PSI, Villigen) ; Arbelaez, Diego (LBNL, Berkeley) ; Brouwer, Lucas (LBNL, Berkeley) ; Caspi, Shlomo (LBNL, Berkeley) ; Felder, Roland (PSI, Villigen) ; Lackner, Friedrich (CERN) ; Sanfilippo, Stephane (PSI, Villigen) ; Sidorov, Serguei (PSI, Villigen) ; Smekens, David (CERN) 显示全部 11 名作者
Publication 2019
Number of pages 6
Note Invited Paper
In: IEEE Trans. Appl. Supercond. 29 (2019) 4002906
DOI 10.1109/TASC.2019.2897326
Subject category Accelerators and Storage Rings
Abstract At the Paul Scherrer Institute (PSI), the Canted-Cosine-Theta (CCT) magnet program aims at demonstrating that CCT technology is a viable candidate for the development of 16-T dipole magnets, required for future circular colliders. The first step in this direction is the implementation of a Nb3Sn 1-m-long, two-layer CCT single-aperture dipole, referred to as Canted Dipole One (CD1), which is designed to achieve a peak field in the bore of  11 T. The in-house manufacturing and assembly of CD1 requires the infrastructure for a number of fabrication steps to be set up at PSI. In this paper, the authors review the coil manufacturing process of Nb3Sn CCT model magnets at PSI and describe the related commissioning phase.
Copyright/License Publication: © 2019-2025 IEEE

Corresponding record in: Inspire


 记录创建於2019-09-07,最後更新在2019-09-07



  • Send to ScienceWise.info