-
Optical absorption spectrum reveals gaseous chlorine in anti-resonant hollow core fibres
Authors:
Kerrianne Harrington,
Robbie Mears,
James M. Stone,
William J. Wadsworth,
Jonathan C. Knight,
T. A. Birks
Abstract:
We have observed unexpected spectral attenuation of ultraviolet light in freshly drawn hollow core optical fibres. When the fibre ends are left open to atmosphere, this loss feature dissipates over time. The loss matches the absorption spectrum of gaseous (molecular) chlorine and, given enough time, the transmission spectrum of the fibre recovers to that expected from the morphological structure o…
▽ More
We have observed unexpected spectral attenuation of ultraviolet light in freshly drawn hollow core optical fibres. When the fibre ends are left open to atmosphere, this loss feature dissipates over time. The loss matches the absorption spectrum of gaseous (molecular) chlorine and, given enough time, the transmission spectrum of the fibre recovers to that expected from the morphological structure of the fibre. Our measurements indicate an initial chlorine concentration of 0.45 $μ$ mol/cm$^{3}$ in the hollow core, equivalent to 1.1 mol% Cl$_{2}$ at atmospheric pressure.
△ Less
Submitted 26 July, 2024;
originally announced July 2024.
-
A new light at the end of the tunnel: fiber gas discharge lasers
Authors:
A. L. Love,
S. A. Bateman,
W. Belardi,
F. Yu,
J. C. Knight,
D. W. Coutts,
C. E. Webb,
W. J. Wadsworth
Abstract:
Optical fibers have emerged as a transformative platform for building better and more robust solid state lasers. However, the wavelengths available to these lasers are limited. Using hollow core optical fibers allows us to add gases as new potential gain media for fiber lasers, and also liberates the gas laser from the limits normally imposed by diffraction. To demonstrate the new technology, we p…
▽ More
Optical fibers have emerged as a transformative platform for building better and more robust solid state lasers. However, the wavelengths available to these lasers are limited. Using hollow core optical fibers allows us to add gases as new potential gain media for fiber lasers, and also liberates the gas laser from the limits normally imposed by diffraction. To demonstrate the new technology, we present a fiber laser at 3500 nm wavelength, using an antiresonant guiding hollow core optical fiber containing neutral xenon atoms pumped by an afterglow discharge of a helium-xenon mixture within a fiber of over 1 m in length. Laser action is confirmed through observation of polarization dependence, mode pulling and mode beating. Our results unlock a new breed of flexible fiber lasers operating at a plethora of wavelengths, many previous unavailable.
△ Less
Submitted 19 December, 2023;
originally announced December 2023.
-
Guidance of ultraviolet light down to 190 nm in a hollow-core optical fibre
Authors:
Robbie Mears,
Kerrianne Harrington,
William J. Wadsworth,
Jonathan C. Knight,
James M. Stone,
Tim A. Birks
Abstract:
We report an anti-resonant hollow core fibre with ultraviolet transmission down to 190 nm, covering the entire UV-A, UV-B and much of the UV-C band. Guidance from 190 - 400 nm is achieved apart for a narrow high loss resonance band at 245 - 265 nm. The minimum attenuation is 0.13 dB/m at 235 nm and 0.16 dB/m at 325 nm. With an inscribed core diameter of ~ 12 $μ$m, the fibre's bend loss at 325 nm w…
▽ More
We report an anti-resonant hollow core fibre with ultraviolet transmission down to 190 nm, covering the entire UV-A, UV-B and much of the UV-C band. Guidance from 190 - 400 nm is achieved apart for a narrow high loss resonance band at 245 - 265 nm. The minimum attenuation is 0.13 dB/m at 235 nm and 0.16 dB/m at 325 nm. With an inscribed core diameter of ~ 12 $μ$m, the fibre's bend loss at 325 nm was 0.22 dB per turn for a bend radius of 3 cm at 325 nm.
△ Less
Submitted 24 February, 2024; v1 submitted 11 October, 2023;
originally announced October 2023.
-
Ability of a pore network model to predict fluid flow and drag in saturated granular materials
Authors:
Adnan Sufian,
Chris Knight,
Catherine O'Sullivan,
Berend van Wachem,
Daniele Dini
Abstract:
The local flow field and seepage induced drag obtained from Pore Network Models (PNM) is compared to Immersed Boundary Method (IBM) simulations, for a range of linear graded and bimodal samples. PNM were generated using a weighted Delaunay Tessellation (DT), along with the Modified Delaunay Tessellation (MDT) which considers the merging of tetrahedral Delaunay cells. The local pressure field was v…
▽ More
The local flow field and seepage induced drag obtained from Pore Network Models (PNM) is compared to Immersed Boundary Method (IBM) simulations, for a range of linear graded and bimodal samples. PNM were generated using a weighted Delaunay Tessellation (DT), along with the Modified Delaunay Tessellation (MDT) which considers the merging of tetrahedral Delaunay cells. The local pressure field was very accurately captured in all linear graded and bimodal samples. Local flux (flow rate) exhibited more scatter, but the PNM based on the MDT clearly provided a better correlation with the IBM. There was close similarity in the network shortest paths obtained from PNM and IBM, indicating that the PNM captures dominant flow channels. Further, by overlaying the PNM on a streamline profile, it was demonstrated that local pressure drops coincided with the pore constrictions. A rigorous validation was undertaken for the drag force calculated from the PNM by comparing with analytical solutions for ordered array of spheres. This method was subsequently applied to all linear graded and bimodal samples, and the calculated force was compared with the IBM data. Linear graded samples were able to calculate the force with reasonable accuracy, while the bimodal sample exhibited slightly more scatter.
△ Less
Submitted 8 January, 2022;
originally announced January 2022.
-
Fluorescence intensity correlation imaging with high resolution and elemental contrast using intense x-ray pulses
Authors:
Phay J. Ho,
Christopher J. Knight,
Linda Young
Abstract:
We theoretically investigate the fluorescence intensity correlation (FIC) of Ar clusters and Mo-doped iron oxide nanoparticles subjected to intense, femtosecond and sub-femtosecond XFEL pulses for high-resolution and elemental contrast imaging. We present the FIC of {\Ka} and {\Kah} emission in Ar clusters and discuss the impact of sample damage on retrieving high-resolution structural information…
▽ More
We theoretically investigate the fluorescence intensity correlation (FIC) of Ar clusters and Mo-doped iron oxide nanoparticles subjected to intense, femtosecond and sub-femtosecond XFEL pulses for high-resolution and elemental contrast imaging. We present the FIC of {\Ka} and {\Kah} emission in Ar clusters and discuss the impact of sample damage on retrieving high-resolution structural information and compare the obtained structural information with those from the coherent difractive imaging (CDI) approach. We found that, while sub-femtosecond pulses will substantially benefit the CDI approach, few-femtosecond pulses may be sufficient for achieving high-resolution information with FIC. Furthermore, we show that the fluorescence intensity correlation computed from the fluorescence of Mo atoms in Mo-doped iron oxide nanoparticles can be used to image dopant distributions.
△ Less
Submitted 29 March, 2021;
originally announced March 2021.
-
Vapor-liquid equilibrium of water with the MB-pol many-body potential
Authors:
Maria Carolina Muniz,
Thomas E. Gartner III,
Marc Riera,
Christopher Knight,
Shuwen Yue,
Francesco Paesani,
Athanassios Z. Panagiotopoulos
Abstract:
Among the many existing molecular models of water, the MB-pol many-body potential has emerged as a remarkably accurate model, capable of reproducing thermodynamic, structural, and dynamic properties across water's solid, liquid, and vapor phases. In this work, we assessed the performance of MB-pol with respect to an important set of properties related to vapor-liquid coexistence and interfacial be…
▽ More
Among the many existing molecular models of water, the MB-pol many-body potential has emerged as a remarkably accurate model, capable of reproducing thermodynamic, structural, and dynamic properties across water's solid, liquid, and vapor phases. In this work, we assessed the performance of MB-pol with respect to an important set of properties related to vapor-liquid coexistence and interfacial behavior. Through direct coexistence classical molecular dynamics simulations at temperatures 400 K < T < 600 K, we calculated properties such as equilibrium coexistence densities, vapor-liquid interfacial tension, vapor pressure, and enthalpy of vaporization, and compared the MB-pol results to experimental data. We also compared rigid vs. fully flexible variants of the MB-pol model and evaluated system size effects for the properties studied. We found that the MB-pol model predictions are in good agreement with experimental data, even for temperatures approaching the vapor-liquid critical point; this agreement was largely insensitive to system size or the rigid vs. flexible treatment of the intramolecular degrees of freedom. These results attest to the chemical accuracy of MB-pol and its high degree of transferability, thus enabling MB-pol's application across a large swath of water's phase diagram.
△ Less
Submitted 28 April, 2021; v1 submitted 11 March, 2021;
originally announced March 2021.
-
Demonstration of neutron radiation-induced nucleation of supercooled water
Authors:
Matthew Szydagis,
Cecilia Levy,
Yujia Huang,
Alvine C. Kamaha,
Corwin C. Knight,
Gregory R. C. Rischbieter,
Peter W. Wilson
Abstract:
We present here direct evidence for neutrons causing nucleation of supercooled water. Highly purified water (20 nm filtration) is cooled to well below freezing (as low as -20 degrees C) with a radioactive calibration source of neutrons / gamma-rays either present or removed during each of many control cooling runs for the same volume of water. When it is primarily neutrons irradiating the sample b…
▽ More
We present here direct evidence for neutrons causing nucleation of supercooled water. Highly purified water (20 nm filtration) is cooled to well below freezing (as low as -20 degrees C) with a radioactive calibration source of neutrons / gamma-rays either present or removed during each of many control cooling runs for the same volume of water. When it is primarily neutrons irradiating the sample bulk, the non-equilibrium freezing point (also known as the "supercooling point") is, on average, +0.7 degrees C warmer than the control equivalent, with a statistical significance of greater than 5 sigma, with systematic uncertainty included. This effect is not observed with water in the presence of gamma-rays instead of neutrons. While these neutrons should have theoretically had sufficient energy to mount the energy barrier, corroborating our results, their raising of supercooling temperature has never been reported experimentally to the best of our knowledge. The potential to use deeply supercooled solutions, not only water, as metastable detectors for radiation and perhaps dark matter or neutrino physics presents now a new avenue for exploration.
△ Less
Submitted 22 May, 2021; v1 submitted 24 July, 2018;
originally announced July 2018.
-
On the accuracy of the MB-pol many-body potential for water: Interaction energies, vibrational frequencies, and classical thermodynamic and dynamical properties from clusters to liquid water and ice
Authors:
Sandeep K. Reddy,
Shelby C. Straight,
Pushp Bajaj,
C. Huy Pham,
Marc Riera,
Daniel R. Moberg,
Miguel A. Morales,
Chris Knight,
Andreas W. Gotz,
Francesco Paesani
Abstract:
The MB-pol many-body potential has recently emerged as an accurate molecular model for water simulations from the gas to the condensed phase. In this study, the accuracy of MB-pol is systematically assessed across the three phases of water through extensive comparisons with experimental data and high-level ab initio calculations. Individual many-body contributions to the interaction energies as we…
▽ More
The MB-pol many-body potential has recently emerged as an accurate molecular model for water simulations from the gas to the condensed phase. In this study, the accuracy of MB-pol is systematically assessed across the three phases of water through extensive comparisons with experimental data and high-level ab initio calculations. Individual many-body contributions to the interaction energies as well as vibrational spectra of water clusters calculated with MB-pol are in excellent agreement with reference data obtained at the coupled cluster level. Several structural, thermodynamic, and dynamical properties of the liquid phase at atmospheric pressure are investigated through classical molecular dynamics simulations as a function of temperature. The structural properties of the liquid phase are in nearly quantitative agreement with X-ray diffraction data available over the temperature range from 268 to 368 K. The analysis of other thermodynamic and dynamical quantities emphasizes the importance of explicitly including nuclear quantum effects in the simulations, especially at low temperature, for a physically correct description of the properties of liquid water. Furthermore, both densities and lattice energies of several ice phases are also correctly reproduced by MB-pol. Following a recent study of DFT models for water, a score is assigned to each computed property, which demonstrates the high and, in many respects, unprecedented accuracy of MB-pol in representing all three phases of water.
△ Less
Submitted 9 September, 2016;
originally announced September 2016.
-
Improved Ab Initio Molecular Dynamics by Minimal Biasing with Experimental Data
Authors:
Andrew D. White,
Chris Knight,
Glen M. Hocky,
Gregory A. Voth
Abstract:
Accounting for electrons and nuclei simultaneously is a powerful capability of ab initio molecular dynamics (AIMD). However, AIMD is often unable to accurately reproduce properties of systems such as water due to inaccuracies in the underlying electronic density functionals. This shortcoming is often addressed by added empirical corrections and/or increasing the simulation temperature. We present…
▽ More
Accounting for electrons and nuclei simultaneously is a powerful capability of ab initio molecular dynamics (AIMD). However, AIMD is often unable to accurately reproduce properties of systems such as water due to inaccuracies in the underlying electronic density functionals. This shortcoming is often addressed by added empirical corrections and/or increasing the simulation temperature. We present here a maximum-entropy approach to directly incorporate limited experimental data via a minimal bias. Biased AIMD simulations of water and an excess proton in water are shown to give significantly improved properties both for observables which were biased to match experimental data and for unbiased observables. This approach also yields new physical insight into inaccuracies in the underlying density functional theory as utilized in the unbiased AIMD.
△ Less
Submitted 24 January, 2017; v1 submitted 1 July, 2016;
originally announced July 2016.
-
In the footsteps of Ebenezer Porter Mason and his nebulae
Authors:
Jeremy Shears,
Carl Knight,
Martin Lewis,
Lee Macdonald,
Stewart Moore,
Jeff Young
Abstract:
In 1839 Ebenezer Porter Mason (1819-1840) produced detailed drawings of the Omega Nebula (M17), the Trifid Nebula (M20) and the eastern part of the Veil Nebula (NGC 6992 and 6995). He used a 12-inch (30 cm) reflector that he and his friends had built at Yale College, which at the time was the largest telescope in the USA. The drawings were remarkable for their accuracy and for his adoption of a ne…
▽ More
In 1839 Ebenezer Porter Mason (1819-1840) produced detailed drawings of the Omega Nebula (M17), the Trifid Nebula (M20) and the eastern part of the Veil Nebula (NGC 6992 and 6995). He used a 12-inch (30 cm) reflector that he and his friends had built at Yale College, which at the time was the largest telescope in the USA. The drawings were remarkable for their accuracy and for his adoption of a new technique for delineating gradients in nebulosity using isophotes, or lines of equal brightness. This paper reviews his life and his observations, comparing his results with those of the modern amateur astronomer.
△ Less
Submitted 30 January, 2014;
originally announced January 2014.
-
Multi-wavelength source at ITU-T grid based on ultra-flattened dispersion photonic crystal fibers
Authors:
Arismar Cerqueira S. Jr.,
J. D. Marconi,
L. H. Gabrielli,
A. A. Rieznik,
H. E. Hernandez-Figueroa,
H. L. Fragnito,
J. C. Knight
Abstract:
We report on the development of a multi-wavelength source locked to the ITU-T grid at 100 GHz spacing and based on ultra-flattened dispersion photonic crystal fibers. The ITU-T grid frequencies are generated by taking advantage of multiple four-wave mixing processes. We experimentally obtained 250 products spanning over 200nm by launching 03 strong pump signals. Simulations based on Split-Step F…
▽ More
We report on the development of a multi-wavelength source locked to the ITU-T grid at 100 GHz spacing and based on ultra-flattened dispersion photonic crystal fibers. The ITU-T grid frequencies are generated by taking advantage of multiple four-wave mixing processes. We experimentally obtained 250 products spanning over 200nm by launching 03 strong pump signals. Simulations based on Split-Step Fourier Method have been carried out in order to investigate and improve the performance of this nonlinear optical device.
△ Less
Submitted 16 June, 2008;
originally announced June 2008.