Showing 1–8 of 8 results for author: Aloisio, A

The Belle II Detector Upgrades Framework Conceptual Design Report

Authors: H. Aihara, A. Aloisio, D. P. Auguste, M. Aversano, M. Babeluk, S. Bahinipati, Sw. Banerjee, M. Barbero, J. Baudot, A. Beaubien, F. Becherer, T. Bergauer, F. U. Bernlochner., V. Bertacchi, G. Bertolone, C. Bespin, M. Bessner, S. Bettarini, A. J. Bevan, B. Bhuyan, M. Bona, J. F. Bonis, J. Borah, F. Bosi, R. Boudagga , et al. (186 additional authors not shown)

Abstract: We describe the planned near-term and potential longer-term upgrades of the Belle II detector at the SuperKEKB electron-positron collider operating at the KEK laboratory in Tsukuba, Japan. These upgrades will allow increasingly sensitive searches for possible new physics beyond the Standard Model in flavor, tau, electroweak and dark sector physics that are both complementary to and competitive wit… ▽ More We describe the planned near-term and potential longer-term upgrades of the Belle II detector at the SuperKEKB electron-positron collider operating at the KEK laboratory in Tsukuba, Japan. These upgrades will allow increasingly sensitive searches for possible new physics beyond the Standard Model in flavor, tau, electroweak and dark sector physics that are both complementary to and competitive with the LHC and other experiments. △ Less

Submitted 4 July, 2024; v1 submitted 26 June, 2024; originally announced June 2024.

Comments: Editor: F. Forti 170 pages

Report number: KEK-REPORT-2024-1, BELLE2-REPORT-2024-042

Proton induced Dark Count Rate degradation in 150-nm CMOS Single-Photon Avalanche Diodes

Authors: M. Campajola, F. Di Capua, D. Fiore, E. Sarnelli, A. Aloisio

Abstract: Proton irradiation effects on a Single-Photon Avalanche Diodes (SPADs) device manufactured using a 150-nm CMOS process are presented. An irradiation campaign has been carried out with protons of 20 MeV and 24 MeV on several samples of a test chip containing SPADs arrays with two different junction layouts. The dark count rate distributions have been analyzed as a function of the displacement damag… ▽ More Proton irradiation effects on a Single-Photon Avalanche Diodes (SPADs) device manufactured using a 150-nm CMOS process are presented. An irradiation campaign has been carried out with protons of 20 MeV and 24 MeV on several samples of a test chip containing SPADs arrays with two different junction layouts. The dark count rate distributions have been analyzed as a function of the displacement damage dose. Annealing and cooling have been investigated as possible damage mitigation approaches. We also discuss, through a space radiation simulation, the suitability of such devices on several space mission case-studies. △ Less

Submitted 1 August, 2022; originally announced August 2022.

Comments: This is an author-created, un-copyedited version of an article accepted for publication/published in Nuclear Instruments and Methods in Physics Research Section A. The Version of Record is available online at https://doi.org/10.1016/j.nima.2019.162722

Journal ref: Nuclear Inst. and Methods in Physics Research, A 947 (2019) 162722

Measurements of Beam Backgrounds in SuperKEKB Phase 2

Authors: Zachary J. Liptak, Antonio Paladino, Luka Santelj, Jeffery Schueler, Slavomira Stefkova, Hikaru Tanigawa, Noritsugu Tsuzuki, Alberto Aloisio, Patrick Ahlburg, Philip Bambade, Giovanni Bassi, Matthew Barrett, Jerome Baudot, Thomas Browder, Giulia Casarosa, Giuseppe Cautero, David Cinabro, Gilles Claus, Daniel Cuesta, Francesco Di Capua, Salvatore Di Carlo, John Flanagan, Ariane Frey, Bryan Fulsom, Yoshihiro Funakoshi , et al. (44 additional authors not shown)

Abstract: The high design luminosity of the SuperKEKB electron-positron collider will result in challenging levels of beam-induced backgro\ unds in the interaction region. Understanding and mitigating these backgrounds is critical to the success of the Belle~II experi\ ment. We report on the first background measurements performed after roll-in of the Belle II detector, a period known as SuperKE\ KB Phase 2… ▽ More The high design luminosity of the SuperKEKB electron-positron collider will result in challenging levels of beam-induced backgro\ unds in the interaction region. Understanding and mitigating these backgrounds is critical to the success of the Belle~II experi\ ment. We report on the first background measurements performed after roll-in of the Belle II detector, a period known as SuperKE\ KB Phase 2, utilizing both the BEAST II system of dedicated background detectors and the Belle II detector itself. We also repor\ t on first revisions to the background simulation made in response to our findings. Backgrounds measured include contributions f\ rom synchrotron radiation, beam-gas, Touschek, and injection backgrounds. At the end of Phase 2, single-beam backgrounds origina\ ting from the 4 GeV positron Low Energy Ring (LER) agree reasonably well with simulation, while backgrounds from the 7 GeV elect\ ron High Energy Ring (HER) are approximately one order of magnitude higher than simulation. We extrapolate these backgrounds for\ ward and conclude it is safe to install the Belle II vertex detector. △ Less

Submitted 29 December, 2021; originally announced December 2021.

Comments: 22 Pages, 33 figures

The Monitoring System of the End-Cap Calorimeter in the Belle II experiment

Authors: V. Izzo, A. Aloisio, F. Ameli, A. Anastasio, P. Branchini, F. Di Capua, R. Giordano, A. Kuzmin, K. Miyabayashi, I. Nakamura, M. Nakao, G. Tortone, S. Uehara

Abstract: The Belle II experiment is presently in phase-2 operation at the SuperKEKB electron-positron collider in KEK (Tsukuba, Japan). The detector is an upgrade of the Belle experiment at the KEKB collider and it is optimized for the study of rare B decays, being also sensitive to signals of New Physics beyond the Standard Model. The Electromagnetic Calorimeter (ECL) is based on CsI(Tl) scintillation cry… ▽ More The Belle II experiment is presently in phase-2 operation at the SuperKEKB electron-positron collider in KEK (Tsukuba, Japan). The detector is an upgrade of the Belle experiment at the KEKB collider and it is optimized for the study of rare B decays, being also sensitive to signals of New Physics beyond the Standard Model. The Electromagnetic Calorimeter (ECL) is based on CsI(Tl) scintillation crystals. It splits in a barrel and two annular end-cap regions, these latter named Forward and Backward, according to the asymmetric design of the collider. CsI(Tl) crystals deliver a high light output at an affordable cost, however their yield changes with temperature and can be permanently damaged by humidity, due to the strong chemical affinity for moisture. Each ECL region is then equipped with thermistors and humidity probes to monitor environmental data. While sensors and cabling have been inherited from the original Belle design, the ECL monitoring system has been fully redesigned. In this paper, we present hardware and software architecture deployed for the 2112 CsI(Tl) crystals arranged in the Forward and Backward end-caps. Single-Board Computers (SBCs) have been designed ad-hoc for embedded applications. For sensor read-out, a data-acquisition system based on 24-bit ADCs with local processing capability has been realized and interfaced with the SBCs. EPICS applications send data across the Local Area Network for remote control and display. △ Less

Submitted 1 July, 2018; originally announced July 2018.

Configuration Redundancy for Enhanced Reliability in SRAM-based FPGAs

Authors: Raffaele Giordano, Sabrina Perrella, Dario Barbieri, Vincenzo Izzo, Alberto Aloisio

Abstract: Digital off-detector electronics in trigger and data acquisition systems of High-Energy Physics experiments is often implemented by means of SRAM-based FPGAs, which make it possible to achieve reconfigurable, real-time processing and multi-gigabit serial data transfers. On-detector usage of such devices is mostly limited by their configuration sensitivity to radiation-induced upsets, which may alt… ▽ More Digital off-detector electronics in trigger and data acquisition systems of High-Energy Physics experiments is often implemented by means of SRAM-based FPGAs, which make it possible to achieve reconfigurable, real-time processing and multi-gigabit serial data transfers. On-detector usage of such devices is mostly limited by their configuration sensitivity to radiation-induced upsets, which may alter the programmed routing paths and configurable elements. In this work, we show a new technique for enhancing the usage of SRAM-based FPGAs also for on-detector applications. We show a demonstrator of our solution on benchmark designs, including a triple modular redundant design and a serial link (without redundancy) running at 5 Gbps, implemented in a Xilinx Kintex-7 FPGA. We performed irradiation tests at Laboratori Nazionali del Sud (Catania, Italy) with a 62-MeV proton beam. The results show that our scrubbing technique made it possible to detect and correct all the radiation-induced upsets after a total fluence higher than $10^{12}cm^{-2}$. For both the redundant benchmark design and the serial link, the correct functionality was always restored after scrubbing the corrupted configuration bits and resetting the circuit. △ Less

Submitted 25 June, 2018; originally announced June 2018.

Comments: "Accesso Aperto MIUR". This work is part of the ROAL project (grant no. RBSI14JOUV) funded by SIR 2014 program of MIUR. The institutions which contributed to the results reported in this work are the University of Naples "Federico II" and INFN. Corresponding author: R. Giordano (email: [email protected])

The Phase-1 Upgrade for the Level-1 Muon Barrel Trigger of the ATLAS Experiment at LHC

Authors: V. Izzo, A. Aloisio, R. Giordano, S. Perrella, R. Vari

Abstract: The Level-1 Muon Barrel Trigger of the ATLAS Experiment at LHC makes use of Resistive Plate Chamber (RPC) detectors. The on-detector trigger electronics modules are able to identify muons with predefined transverse momentum values (pT) by executing a coincidence logic on signals coming from the various detector layers. Then, on-detector trigger boards transfer trigger data to the off-detector elec… ▽ More The Level-1 Muon Barrel Trigger of the ATLAS Experiment at LHC makes use of Resistive Plate Chamber (RPC) detectors. The on-detector trigger electronics modules are able to identify muons with predefined transverse momentum values (pT) by executing a coincidence logic on signals coming from the various detector layers. Then, on-detector trigger boards transfer trigger data to the off-detector electronics. A complex trigger system processes the incoming data by combining trigger information from the Barrel and the End-cap regions, and by providing the combined muon candidate to the Central Trigger Processor (CTP). For almost a decade, the Level-1 Trigger system has been operating very well, despite the challenging requirements on trigger efficiency and performance, and the continuously increasing LHC luminosity. In order to cope with these constraints, various upgrades for the full trigger system were already deployed, and others have been designed to be installed in the next years. Most of the upgrades to the trigger system rely on state-of-the-art technologies, thus allowing to increase the processing power and data transfer bandwidth, and to design more complex trigger menus. As a consequence, more trigger candidates might be selected by the system, thus supporting new physics studies or topological selections. In this work, we discuss the design of the first prototype of the new Barrel Interface Board, designed around a Xilinx FPGA, which will be used to transfer RPC trigger data to the CTP system. The main requirement for the board is to support the optical transmission of the trigger data with fixed latency and to allow the implementation of new trigger algorithms. We describe the hardware implementation and the results of the first functional and integration tests. △ Less

Submitted 26 June, 2018; v1 submitted 24 June, 2018; originally announced June 2018.

First Measurements of Beam Backgrounds at SuperKEKB

Authors: P. M. Lewis, I. Jaegle, H. Nakayama, A. Aloisio, F. Ameli, M. Barrett, A. Beaulieu, L. Bosisio, P. Branchini, T. E. Browder, A. Budano, G. Cautero, C. Cecchi, Y. -T. Chen, K. -N. Chu, D. Cinabro, P. Cristaudo, S. de Jong, R. de Sangro, G. Finocchiaro, J. Flanagan, Y. Funakoshi, M. Gabriel, R. Giordano, D. Giuressi , et al. (45 additional authors not shown)

Abstract: The high design luminosity of the SuperKEKB electron-positron collider is expected to result in challenging levels of beam-induced backgrounds in the interaction region. Properly simulating and mitigating these backgrounds is critical to the success of the Belle~II experiment. We report on measurements performed with a suite of dedicated beam background detectors, collectively known as BEAST II, d… ▽ More The high design luminosity of the SuperKEKB electron-positron collider is expected to result in challenging levels of beam-induced backgrounds in the interaction region. Properly simulating and mitigating these backgrounds is critical to the success of the Belle~II experiment. We report on measurements performed with a suite of dedicated beam background detectors, collectively known as BEAST II, during the so-called Phase 1 commissioning run of SuperKEKB in 2016, which involved operation of both the high energy ring (HER) of 7 GeV electrons as well as the low energy ring (LER) of 4 GeV positrons. We describe the BEAST II detector systems, the simulation of beam backgrounds, and the measurements performed. The measurements include standard ones of dose rates versus accelerator conditions, and more novel investigations, such as bunch-by-bunch measurements of injection backgrounds and measurements sensitive to the energy spectrum and angular distribution of fast neutrons. We observe beam-gas, Touschek, beam-dust, and injection backgrounds. We do not observe significant synchrotron radiation, as expected. Measured LER beam-gas backgrounds and Touschek backgrounds in both rings are slightly elevated, on average three times larger than the levels predicted by simulation. HER beam-gas backgrounds are on on average two orders of magnitude larger than predicted. Systematic uncertainties and channel-to-channel variations are large, so that these excesses constitute only 1-2 sigma level effects. Neutron background rates are higher than predicted and should be studied further. We will measure the remaining beam background processes, due to colliding beams, in the imminent commissioning Phase 2. These backgrounds are expected to be the most critical for Belle II, to the point of necessitating replacement of detector components during the Phase 3 (full-luminosity) operation of SuperKEB. △ Less

Submitted 5 February, 2018; originally announced February 2018.

Comments: 101 pages, 127 figures

SuperB Technical Design Report

Authors: SuperB Collaboration, M. Baszczyk, P. Dorosz, J. Kolodziej, W. Kucewicz, M. Sapor, A. Jeremie, E. Grauges Pous, G. E. Bruno, G. De Robertis, D. Diacono, G. Donvito, P. Fusco, F. Gargano, F. Giordano, F. Loddo, F. Loparco, G. P. Maggi, V. Manzari, M. N. Mazziotta, E. Nappi, A. Palano, B. Santeramo, I. Sgura, L. Silvestris , et al. (384 additional authors not shown)

Abstract: In this Technical Design Report (TDR) we describe the SuperB detector that was to be installed on the SuperB e+e- high luminosity collider. The SuperB asymmetric collider, which was to be constructed on the Tor Vergata campus near the INFN Frascati National Laboratory, was designed to operate both at the Upsilon(4S) center-of-mass energy with a luminosity of 10^{36} cm^{-2}s^{-1} and at the tau/ch… ▽ More In this Technical Design Report (TDR) we describe the SuperB detector that was to be installed on the SuperB e+e- high luminosity collider. The SuperB asymmetric collider, which was to be constructed on the Tor Vergata campus near the INFN Frascati National Laboratory, was designed to operate both at the Upsilon(4S) center-of-mass energy with a luminosity of 10^{36} cm^{-2}s^{-1} and at the tau/charm production threshold with a luminosity of 10^{35} cm^{-2}s^{-1}. This high luminosity, producing a data sample about a factor 100 larger than present B Factories, would allow investigation of new physics effects in rare decays, CP Violation and Lepton Flavour Violation. This document details the detector design presented in the Conceptual Design Report (CDR) in 2007. The R&D and engineering studies performed to arrive at the full detector design are described, and an updated cost estimate is presented. A combination of a more realistic cost estimates and the unavailability of funds due of the global economic climate led to a formal cancelation of the project on Nov 27, 2012. △ Less

Submitted 24 June, 2013; originally announced June 2013.

Comments: 495 pages

Report number: INFN-13-01/PI, LAL 13-01, SLAC-R-1003