CERN Accelerating science

CERN Document Server 2,016 elementer funnet  1 - 10nesteslutt  gå til element: Søket tok 0.60 sekunder. 
1.
Detection of Fatigue Damage Prior Crack Initiation with Scanning SQUID Microscopy / Lee, Tae-Kyu ; Morris, J W ; Lee, Seungkyun ; Clarke, John
2006 - Published in : AIP Conf. Proc.: 820 (2006) , pp. 1378-1385 External link: Published version from AIP
In : Quantitative Nondestructive Evaluation, Brunswick, ME, USA, 31 Jul - 5 Aug 2005, pp.1378-1385
2.
Growth of small fatigue cracks in Incoloy-908 / Mei, Z ; Krenn, C R ; Morris, J W
LBL-34018.
- 1993. - 10 p.
Full text - Access to document - CERN library copies
3.
Squid / Clarke, J
LBL-12136.
- 1981. - 4 p.
CERN library copies
4.
Restraint of fatigue crack growth by wedge effects of fine particles / Takahashi, I ; Takahashi, C ; Kotani, N
Presents some experimental results which demonstrate restraint of fatigue crack growth in an Al-Mg alloy by wedge effects of fine particles. Fatigue test specimens were machined from a JIS A5083P-O Al-Mg alloy plate of 5 mm thickness and an EDM starter notch was introduced to each specimen. [...]
2000 - Published in : Fatigue Fract. Eng. Mater. Struct.: 23 (2000) , no. 10, pp. 867-77
5.
Single SQUID multiplexer for arrays of voltage-biased / Yoon, J ; Clarke, J ; Gildemeister, J M ; Lee, A T ; Myers, M J ; Richards, P L ; Skidmore, J T ; Spieler, H G
2001
In : 9th International Workshop on Low Temperature Detectors, Madison, WI, USA, 23 - 27 Jul 2001, pp.305-308
6.
Evolution of surface topography in dependence on the grain orientation during surface thermal fatigue of polycrystalline copper / Aicheler, M (CERN) ; Arnau-Izquierdo, G (CERN) ; Taborelli, M (CERN) ; Calatroni, S (CERN) ; Neupert, H (CERN) ; Wuensch, W (CERN) ; Sgobba, S (CERN)
Surface degradation due to cyclic thermal loading plays a major role in the Accelerating Structures (AS) of the future Compact Linear Collider (CLIC) In this article results on surface degradation of thermally cycled polycrystalline copper as a function of the orientation of surface grains are presented Samples with different grain sizes were subjected to thermal fatigue using two different methods and were then characterized using roughness measurements and Orientation Imaging Scanning-Electron-Microscopy (OIM-SEM) Samples fatigued by a pulsed laser show the same trend in the orientation-fatigue damage accumulation as the sample fatigued by pulsed Radio-Frequency-heating (RF) it is clearly shown that 11 1 1] surface grains develop significantly more damage than the surface grains oriented in {[}100] and three reasons for this behaviour are pointed out Based on observations performed near grain boundaries their role in the crack initiation process is discussed The results are in good agreement with previous findings and can be Interpreted on the basis of existing theories Finally the fatigue effects Induced by the two different applied types of thermal cycling are compared (C) 2010 Elsevier Ltd All rights reserved
2011 - Published in : Int. J. Fatigue 33 (2011) 396-402
7.
Overview of applications of SQUIDs / Clarke, J
LBL-19013.
- 1984. - 6 p.
CERN library copies
8.
SQUID concepts and systems / Clarke, J
LBL-26444.
- 1988. - 62 p.
CERN library copies
9.
Advances in SQUID magnetometers / Clarke, J
LBL-10845.- Berkeley, CA : Lawrence Berkeley Nat. Lab., 1980 - 65 p. - Published in : IEEE Trans. Electron Devices 27 (1980) 1896-1908 - CERN library copies
10.
The metallurgical mechanisms of solder fatigue / Morris, J W ; Tribula, D ; Summers, T S E ; Grivas, D
LBL-28405.
- 1989. - 8 p.
CERN library copies

Fant du ikke det du lette etter? Gjenta søket på andre tjenere:
recid:937834 i Amazon
recid:937834 i CERN EDMS
recid:937834 i CERN Intranet
recid:937834 i CiteSeer
recid:937834 i Google Books
recid:937834 i Google Scholar
recid:937834 i Google Web
recid:937834 i IEC
recid:937834 i IHS
recid:937834 i INSPIRE
recid:937834 i ISO
recid:937834 i KISS Books/Journals
recid:937834 i KISS Preprints
recid:937834 i NEBIS
recid:937834 i SLAC Library Catalog