Printer Friendly

Lay a path.

Even for a novice do-it-yourselfer, installing a mortarless flagstone path is a practically foolproof project. "It's not very technical and doesn't require any power tools," says Tom Piergrossi, nursery owner, garden designer, and host of Down to Earth, a gardening show produced by San Diego County Television Network. "It's mostly labor, but there's enough artistry involved to make the task satisfying."

[ILLUSTRATION OMITTED]

Piergrossi and his crew built the path shown here at the home of Rich and Holly Mayes in Escondido, California. It replaced a narrow concrete sidewalk that led straight to the front door. The new path is wider and takes a few curves, forming generous planting pockets along the way.

There's just enough space between the stones for strips of groundcover to grow. Piergrossi used Mazus reptans, a Himalayan native. Other candidates include baby's tears, dwarf thyme, and Irish moss.

DESIGN: Tom Piergrossi Landscape and Nursery, Vista, CA (www.tompiergrossi.com or 760/598-4882)

RELATED ARTICLE

Tools

* Spade

* Rake

* Hand tamper (available at rental yards)

* Two stakes, string, line level

* One or two 2-by-4s, at least 6 ft. long, to use as leveling guides

* Stone or brick chisel

* Safety goggles

Materials

* Gypsum or flour

* Decomposed granite (sold by the cubic yd.; 1 cubic yd., about $24, covers 160 square ft. to a depth of 2 in.)

* Compost

* Flagstone of regular thickness, about 1 1/2 to 2 1/2 in. thick (slabs are sold by weight; 1 ton, about $320, covers 100 to 120 square ft.)

* Groundcover (sold in nursery cell-packs or mud flats)

Directions

1. Outline the edges of the path with gypsum or flour. Measure the surface area of the path, then estimate the amount of decomposed granite, compost, and flagstone you'll need to buy.

2. Use a spade to excavate the soil between the lines to a depth of 4 inches; rake to smooth surface.

[ILLUSTRATION OMITTED]

3. Spread a 2-inch layer of decomposed granite over the area; firm down evenly with a hand tamper.

4. To ensure that the path follows your lot's grade (essential for proper drainage), place stakes at each end, tie a string at paving-stone height between them, and attach a line level to the string.

[ILLUSTRATION OMITTED]

5. Atop the decomposed granite, place pairs of flagstone slabs to act as guide stones; lay the flat side of a 2-by-4 on top of the slabs at the level of the string. Between these guide stones, arrange more flagstone pieces, using the 2-by-4 to keep an even level. Use chisel to break pieces to desired shapes (wear safety goggles), but don't make them too uniform--you want a rustic look. Allow a gap of 1/2 to 1 inch between pieces for planting seams.

[ILLUSTRATION OMITTED]

6. After placing all stones, estimate in linear feet the amount of groundcover you'll need to fill the gaps. Then plant plugs from cell-packs or strips cut from mud flats; fill gaps with a mix of decomposed granite and compost. Water thoroughly.
COPYRIGHT 2005 Sunset Publishing Corp.
No portion of this article can be reproduced without the express written permission from the copyright holder.
Copyright 2005 Gale, Cengage Learning. All rights reserved.

Please bookmark with social media, your votes are noticed and appreciated:




Article Details
Printer friendly Cite/link Email Feedback
Title Annotation:GETTING STARTED
Author:Cohoon, Sharon
Publication:Sunset
Article Type:Brief Article
Geographic Code:1USA
Date:Aug 1, 2005
Words:496
Previous Article:Perfect broccoli.
Next Article:Meet the new prefab: the Sunset Breezehouse redefines casual indoor-outdoor living.
Topics:


Related Articles
Nuts and Bolts.
Lay a path in just one day.
Woman's body found by path.
In the swing: tips and tidbits for Sarasota golfers.
DIY success story.
Writing your journal article in twelve weeks; a guide to academic publishing success.
Build usahospital! Call for builders to deliver revolutionar y Alder Hey.

Terms of use | Privacy policy | Copyright © 2025 Farlex, Inc. | Feedback | For webmasters |