Web Design & Development - Session 3

Web Design
and
Development
By: Shahrzad Peyman
Session 3
October-2017
shahrzad.peymaan@gmail.com
1

2
Today’s Presentation
• Box Model
• Box Sizing
• Position
• Practice
• Lists

Opening the Box Model
3
We’ve familiarized ourselves with HTML and
CSS; we know what they look like and how to
accomplish some of the basics.
Now we’re going to go a bit deeper and look at
exactly how elements are displayed on a page
and how they are sized.

How Are Elements Displayed?
4
You Know the difference between block-level and
inline-level elements:
Block-level elements begin on a new line,
stacking one on top of the other, and occupy any
available width.
Inline-level elements do not begin on a new line.
They fall into the normal ﬂow of a document,
lining up one after the other, and only maintain
the width of their content.

How Are Elements Displayed?
5
To quickly recap,
Block-level elements are generally used for
larger pieces of content, such as headings and
structural elements.
Inline-level elements are generally used for
smaller pieces of content, such as a few words
selected to be bold or italicized.

Developer Tools
6
Most browsers have what are known as Developer
Tools.
These tools allow us to inspect an element on a page,
see where that element lives within the HTML
document, and see what CSS properties and values are
being applied to it.
Most of these tools also include a box model diagram
to show the computed size of an element.

Developer Tools
To see the Developer Tools in Google Chrome, click
“View” within the menu bar and navigate to
“Developer” and then “Developer Tools”. This loads
a drawer at the bottom of the browser window that
provides a handful of tools for inspecting our code.
After selecting an element, we’ll see a handful of
tabs on the right-hand side of the Elements panel
within our Developer Tools. Selecting the
“Computed” tab will show us a breakdown of the
box model for our selected element.
7

Developer Tools
Play around with the Developer Tools, be it in Google Chrome,
Mozilla Firefox, Apple Safari, or other browsers; there is much to
learn from looking at our code. I generally leave the Developer
Tools open at all times when writing HTML and CSS. And I
frequently inspect the code of other websites to see how they are
built, too.
8

Display
Exactly how elements are displayed—as block-
level elements, inline elements, or something
else—is determined by the display property.
Every element has a default display property
value; however, as with all other property values,
that value may be overwritten.
T h e r e a r e q u i t e a f e w v a l u e s f o r
the display property, but the most common
are block, inline, inline-block, and none.
9

Display
We can change an element’s display property value by
selecting that element within CSS and declaring a
new display property value.
A value of block will make that element a block-level
element.
A value of inline will make that element an inline-level
element.
10

Display
Things get interesting with the inline-block value.
Using this value will allow an element to behave as a
block-level element, accepting all box model
properties. However, the element will be displayed in
line with other elements, and it will not begin on a
new line by default.
11

Display
Lastly, using a value of none will completely hide
an element and render the page as if that element
doesn’t exist.
Any elements nested within this element will also
be hidden.
12

Display
Knowing how elements are displayed and how to
change their display is fairly important, as
the display of an element has implications on
how the box model is rendered.
As we discuss the box model, we’ll be sure to
look at these different implications and how they
can affect the presentation of an element.
13

Box Model
14
According to the box model concept, every
element on a page is a rectangular box and may
have width, height, padding, borders, and
margins.

Margin & Padding Colors
The margin and padding properties are
completely transparent and do not accept any
color values.
Being transparent, though, they show the
background colors of relative elements.
For margins, we see the background color of the
parent element, and for padding, we see the
background color of the element the padding is
applied to.
16

Margin & Padding on Inline-
Level Elements
Inline-level elements are affected a bit differently than block
and inline-block elements when it comes to margins and
padding.
Margins only work horizontally—left and right—on
inline-level elements.
Padding works on all four sides of inline-level elements;
however, the vertical padding—the top and bottom—may
bleed into the lines above and below an element.
Margins and padding work like normal for block and inline-
block elements.
17

Box Sizing
Until now the box model has been an additive
design. If you set the width of an element
to 400 pixels and then add 20 pixels
of padding and a border of 10 pixels on every
side, the actual full width of the element
becomes 460 pixels.
Remember, we need to add the width, padding,
and border property values together to get the
actual, full width of an element.
18

Box Sizing
The box model may, however, be changed to support
different calculations.
CSS3 introduced the box-sizing property, which allows
us to change exactly how the box model works and how
an element’s size is calculated.
The property accepts three primary values—content-
box, padding-box, and border-box—each of which has
a slightly different impact on how the box size is
calculated.
19

Content Box
The content-box value is the default value, leaving the
box model as an additive design.
If we don’t use the box-sizing property, this will be
the default value for all elements. The size of an
element begins with the width and height properties,
and then any padding, border, or margin property
values are added on from there.
21

Border Box
The border-box value alters the box model so that
any border or padding property values are
included within the width and height of an element.
When using the border-box value, if an element has
a width of 400 pixels, a padding of 20 pixels
around every side, and a border of 10 pixels around
every side, the actual width will remain 400 pixels.
22

Border Box
If we add a margin, those values will need to be
added to calculate the full box size. No matter
which box-sizing property value is used,
any margin values will need to be added to
calculate the full size of the element.
The padding-box Value Has Been Deprecated!
23

Positioning Content
One of the best things about CSS is that it gives
us the ability to position content and elements on
a page in nearly any imaginable way, bringing
structure to our designs and helping make
content more digestible.
There are a few different types of positioning
within CSS, and each has its own application.
24

Positioning with Floats
One way to position elements on a page is with
the float property. The float property is pretty versatile
and can be used in a number of different ways.
Essentially, the float property allows us to take an
element, remove it from the normal ﬂow of a page,
and position it to the left or right of its parent element.
The float property accepts a few values; the two most
popular values are left and right, which allow elements
to be ﬂoated to the left or right of their parent element.
25

Floats in Practice
Let’s create a common page layout with a header at the top,
two columns in the center, and a footer at the bottom. Ideally
t h i s p a g e w o u l d b e m a r k e d u p u s i n g
the <header>, <section>, <aside>, and <footer> elements.
Inside the <body> element, the HTML may look like this:
26

Floats in Practice
Here the <section> and <aside> elements, as
block-level elements, will be stacked on top of one
another by default.
27

Floats in Practice
However, we want these elements to sit side by side. By
ﬂoating the <section> to the left and the <aside> to
the right, we can position them as two columns sitting
opposite one another. Our CSS should look like this:
28

Floats in Practice
For reference, when an element is floated, it will
float all the way to the edge of its parent element. If
there isn’t a parent element, the floated element
will then float all the way to the edge of the page.
When we float an element, we take it out of the
normal flow of the HTML document. This causes
the width of that element to default to the width of
the content within it.
29

Clearing & Containing
Floats
The float property was originally designed to allow content to
wrap around images. An image could be floated, and all of the
content surrounding that image could then naturally flow around
it. Although this works great for images, the float property was
never actually intended to be used for layout and positioning
purposes, and thus it comes with a few pitfalls.
One of those pitfalls is that occasionally the proper styles will
not render on an element that it is sitting next to or is a parent
element of a floated element. When an element is floated, it is
taken out of the normal flow of the page, and, as a result, the
styles of elements around that floated element can be negatively
impacted.
30

Clearing & Containing
Floats
Often margin and padding property values aren’t interpreted
correctly, causing them to blend into the floated element; other
properties can be affected, too.
Another pitfall is that sometimes unwanted content begins to
wrap around a floated element. Removing an element from the
flow of the document allows all the elements around the floated
element to wrap and consume any available space around the
floated element, which is often undesired.
To prevent content from wrapping around floated elements, we
need to clear, or contain, those floats and return the page to its
normal flow. We’ll proceed by looking at how to clear floats, and
then we’ll take a look at how to contain floats.
31

Clearing Floats
Clearing floats is accomplished using the clear property,
which accepts a few different values: the most commonly
used values being left, right, and both.
The left value will clear left floats, while the right value
will clear right floats. The both value, however, will clear
both left and right floats and is often the most ideal value.
32

Clearing Floats
Going back to our previous example, if we use the clear property
with the value of both on the <footer> element, we are able to
clear the floats. It is important that this clear be applied to an
element appearing after the floated elements, not before, to return
the page to its normal flow.
33

Positioning with Inline-Block
In addition to using ﬂoats, another way we can position content is
by using the display property in conjunction with the inline-
block value. The inline-block method, as we’ll discuss, is primarily
helpful for laying out pages or for placing elements next to one
another within a line.
Recall that the inline-block value for the display property will
display elements within a line while allowing them to accept all box
model properties, including height, width, padding, border,
and margin. Using inline-block elements allows us to take full
advantage of the box model without having to worry about clearing
any ﬂoats.
34

Inline-Block in Practice
We’ll start by keeping our HTML just as it is:
35

Inline-Block in Practice
Now instead of ﬂoating our three <section> elements,
we’ll change their display values to inline-block,
leaving the margin and width properties from before
alone. Our resulting CSS will look like this:
36

Creating Reusable Layouts
When building a website, it is always best to write modular styles
that may be reused elsewhere, and reusable layouts are high on
the list of reusable code. Layouts can be created using either
floats or inline-block elements, but which works best and why?
Whether it’s better to use floats or inline-block elements to layout
the structure of a page is open to debate. My approach is to use
inline-block elements to create the grid—or layout—of a page and
to then use floats when I want content to wrap around a given
element (as floats were intended to do with images). Generally, I
also find inline-block elements easier to work with.
37

Uniquely Positioning Elements
Every now and then we’ll want to precisely position an
element, but floats or inline-block elements won’t do the
trick.
Floats, which remove an element from the flow of a page,
often produce unwanted results as surrounding elements
flow around the floated element.
Inline-block elements, unless we’re creating columns, can
be fairly awkward to get into the proper position.
For these situations we can use the position property in
connection with box offset properties.
38

Uniquely Positioning Elements
The position property identifies how an element is positioned on
a page and whether or not it will appear within the normal flow of a
document.
This is used in conjunction with the box offset properties—
top, right, bottom, and left—which identify exactly where an
element will be positioned by moving elements in a number of
different directions.
By default every element has a position value of static, which
means that it exists in the normal flow of a document and it doesn’t
accept any box offset properties. The static value is most
commonly overwritten with a relative or absolute value, which
we’ll examine next.
39

Relative Positioning
The relative value for the position property
allows elements to appear within the normal flow
a page, leaving space for an element as intended
while not allowing other elements to flow around
it; however, it also allows an element’s display
position to be modified with the box offset
properties.
40

For example, consider the following HTML and CSS:
41

Here the second <div> element, the element with the class
of offset, has a position value of relative and two box offset
properties, left and top. This preserves the original position of the
element, and other elements are not allowed to move into this
space. Additionally, the box offset properties reposition the element,
pushing it 20 pixels from the left and 20 pixels from the top of its
original location.
With relatively positioned elements, it’s important to know that the
box offset properties identify where an element will be moved from
given its original position. Thus, the left property with a value
of 20 pixels will actually push the element towards the right, from
the left, 20 pixels. The top property with a value of 20 pixels, then,
will push an element towards the bottom, from the top, 20 pixels.
42

Absolute Positioning
The absolute value for the position property is different
from the relative value in that an element with
a position value of absolute will not appear within the
normal ﬂow of a document, and the original space and
position of the absolutely positioned element will not be
preserved.
Additionally, absolutely positioned elements are moved in
relation to their closest relatively positioned parent element.
Should a relatively positioned parent element not exist, the
absolutely positioned element will be positioned in relation to
the <body> element. That’s quite a bit of information; let’s
take a look at how this works inside some code:
43

In Practice - 1
Subject: Conference Website
1- Inside of our “styles-conference” folder, let’s create a new
folder named “assets.” We’ll store all of the assets for our
website, such as our style sheets, images, videos, and so forth,
in this folder. For our style sheets, let’s go ahead and add
another folder named “stylesheets” inside the “assets” folder.
2- Using our text editor, let’s create a new ﬁle
named main.css and save it within the “stylesheets” folder we
just created.
45

In Practice - 1
3- Looking at our index.html file in a web browser, we can see
that the <h1> and <p> elements each have default CSS styles.
Specifically, they each have a unique font size and spacing around
them.
4- Let’s connect main.css to our index.html file. Opening
the index.html file in our text editor, let’s add the <link> element
within our <head> element, just after the <title> element.
46

In Practice - 2
Currently, our Styles Conference website lacks real structure—and
content for that matter. Let’s take some time to ﬂesh out our home
page a bit.
1- Using our existing index.html ﬁle, let’s add in a <header> element.
Our <header> element should include our existing <h1> element; let’s
also add an <h3> element as a tagline to support our <h1> element.
47

In Practice - 2
2- After our <header> element, let’s add a new group of
content, using the <section> element, that introduces
our conference. We’ll begin this section with a
new <h2> element and end it with our existing paragraph.
48

In Practice - 2
3- Following the introduction to our conference, let’s add another group
of content that teases a few of the pages we’ll be adding, speciﬁcally
the Speakers, Schedule, and Venue pages. Each of the pages we’re
teasing should also reside within its own section and include
supporting text.
4- Lastly, let’s add our copyright within the <footer> element at the end
of our page. To do so let’s use the <small> element, which semantically
represents side comments and small print—perfect for our copyright.
49

In Practice - 3
It’s time to take Styles Conference from a single-page website to a
full-blown website with multiple pages, all of which will be linked
together using hyperlinks.
1- We’ll begin by making our “Styles Conference” text inside
the <h1> element within our <header> element link to
the index.html page.
50

In Practice - 3
2- In order to navigate across
all of the different pages,
w e ’ r e g o i n g a d d i n a
navigation menu, using
the <nav> element, within
our <header> element. We’ll
b e c r e a t i n g S p e a k e r s ,
S c h e d u l e , Ve n u e , a n d
Register pages to go with our
home page, so we should
create links for all of them.
51

In Practice - 3
3- Let’s also add the same navigation menu from our <header> element to
our <footer> element for convenience.
4- Within the <section> element that introduces our conference, just
below our header, we should also include a link to register for the
conference. Placing a link below the paragraph will work perfectly.
52

In Practice - 3
3-Now we need to create a handful of new pages. Let’s
create speakers.html, schedule.html, venue.html,
and register.html files. These files should live within the same
folder as the index.html file, and, because we’re keeping them
inside the same folder, all of our links should work as expected.
To ensure that all of our pages look the same, let’s make sure
that all of these new files have the same document structure
and <header> and <footer> elements as the index.html file.
53

Creating Lists
Lists are a part of everyday life. To-do lists determine what
to get done. Navigational routes provide turn-by-turn lists
of directions. Recipes provide lists of ingredients and lists
of instructions. With a list for nearly everything, it’s easy
to understand why they are also popular online.
When we want to use a list on a website, HTML provides
three different types to choose from: unordered, ordered,
and description lists. Choosing which type of list to use—
or whether to use a list at all—comes down to the content
and the most semantically appropriate option for
displaying that content.
55

Creating Lists
In addition to the three different types of lists available
within HTML, there are multiple ways to style these lists
with CSS.
For example, we can choose what type of marker to use on
a list. The marker could be square, round, numeric,
alphabetical, or perhaps nonexistent.
Also, we can decide if a list should be displayed vertically
or horizontally.
All of these choices play signiﬁcant roles in the styling of
our web pages.
56

Unordered Lists
An unordered list is simply a list of related items whose order does not
matter. Creating an unordered list in HTML is accomplished using the
unordered list block-level element, <ul>. Each item within an unordered
list is individually marked up using the list item element, <li>.
By default, most browsers add a vertical margin and left padding to
the <ul> element and precede each <li> element with a solid dot. This
solid dot is called the list item marker, and it can be changed using CSS.
57

Ordered Lists
The ordered list element, <ol>, works very much like the unordered list
element; individual list items are created in the same manner. The main
difference between an ordered list and an unordered list is that with an
ordered list, the order in which items are presented is important.
Because the order matters, instead of using a dot as the default list
item marker, an ordered list uses numbers.
58

Start Attribute
The start attribute deﬁnes the number from which an ordered
list should start. By default, ordered lists start at 1. However,
there may be cases where a list should start at 30 or another
number. When we use the start attribute on the <ol> element,
we can identify exactly which number an ordered list should
begin counting from.
59

Reversed Attribute
The reversed attribute, when used on the <ol> element, allows a
list to appear in reverse order. An ordered list of ﬁve items
numbered 1 to 5 may be reversed and ordered from 5 to 1.
The reversed attribute is a Boolean attribute, and as such it
doesn’t accept any value. It is either true or false. False is the
default value; the value becomes true when the attribute
name reversed appears on the <ol> element.
60

Value Attribute
The value attribute may be used on an individual <li> element
within an ordered list to change its value within the list. The number
of any list item appearing below a list item with a value attribute
will be recalculated accordingly.
As an example, if the second list item has a value attribute value
of 9, the number on that list item marker will appear as if it is the
ninth item. All subsequent list items will be numbered upwards
from 9.
61

Description Lists
Another type of list seen online (but not as often as unordered or
ordered lists) is the description list. Description lists are used to outline
multiple terms and their descriptions, as in a glossary, for example.
Creating a description list in HTML is accomplished using the
description list block-level element, <dl>. Instead of using
a <li> element to mark up list items, the description list requires two
block-level elements: the description term element, <dt>, and the
description element, <dd>.
A description list may contain numerous terms and descriptions, one
after the other. Additionally, a description list may have multiple terms
per description, as well as multiple descriptions per term. A single term
may have multiple meanings and warrant multiple descriptions.
Conversely, a single description may be suitable for multiple terms.
62

Description Lists
When adding a description list, the <dt> element must come before
the <dd> element. The deﬁnition term and the description that directly
follows it correspond to one another; thus, the order of these elements is
important.
63

Nesting Lists
One feature that makes lists extremely powerful is their ability to be
nested. Every list may be placed within another list; they can be
nested continually.
One trick with nesting lists is to know where to begin and end each
list and list item. Speaking speciﬁcally about unordered and ordered
lists, as that is where most nesting will occur, the only element that
may reside directly within the <ul> and <ol> elements is
the <li> element. To repeat, the only element we can place as a
direct child of the <ul> and <ol> elements is the <li> element.
To nest a list rather than closing a list item, begin a new list. Once
the nested list is complete and closed, close the wrapping list item
and continue on with the original list.
64

Nesting Lists
Because nesting lists can be a little tricky—and unwanted styles
will appear if it’s done incorrectly—let’s quickly review.
The <ul> and <ol> elements may contain only <li> elements.
The <li> element may contain any normal element as desired;
however, the <li> element has to be a direct child of either
a <ul> or <ol> element.
It’s also worth noting that as lists are nested inside of other lists,
their list item markers will change according to how deeply the list
is nested. In the previous example, the unordered list nested within
the ordered list uses hollow circles instead of solid discs as the list
item marker. This change happens because the unordered list is
nested one level into the ordered list.
65

List Item Styling
Unordered and ordered lists use list item markers
by default.
For unordered lists these are typically solid dots,
while ordered lists typically use numbers.
With CSS the style and position of these list item
markers may be adjusted.
66

List Style Type Property
The list-style-type property is used to set the
content of a list item marker. The available values range
from squares and decimal numbers all the way to
Armenian numbering, and the style may be placed on
either the <ul>, <ol>, or <li> elements within CSS.
Any list-style-type property value can be added to
either unordered or ordered lists. With this in mind, it is
possible to use a numeric list item marker on an
unordered list and a nonnumeric marker on an ordered
list.
67

Using an Image as a List Item Marker
There may come a time when the default list-style-type property
values are not enough, and we want to customize our own list item
marker.
Doing so is most commonly accomplished by placing a background
image on each <li> element within a list.
69

Horizontally Displaying List
Occasionally we may want to display lists horizontally
rather than vertically.
Perhaps we want to divide a list into multiple columns, to
build a navigational list, or to put a few list items in a
single row.
Depending on the content and desired appearance, there
are a few different ways to display lists as a single line,
such as by making the display property value
of <li> elements inline or inline-block or by
ﬂoating them.
70

Displaying List
The quickest way to display a list on a single line is to give
the <li> elements a display property value of inline or inline-
block. Doing so places all the <li> elements within a single line,
with a single space between each list item.
More often than not, we’ll use the inline-block property value
rather than the inline property value. The inline-block property
value allows us to easily add vertical margins and other spacing to
the <li> elements, whereas the inline property value does not.
When changing the display property value to inline or inline-
block, the list item marker, be it a bullet, number, or other style, is
removed.
71

Floating List
Changing the display property value to inline or inline-block is
quick; however, it removes the list item marker. If the list item marker is
needed, ﬂoating each <li> element is a better option than changing
the display property.
Setting all <li> elements’ float property to left will horizontally align
all <li> elements directly next to each other without any space
between them.
When we ﬂoat each <li> element, the list item marker is displayed by
default and will actually sit on top of the <li> element next to it. To
prevent the list item marker from being displayed on top of
other <li> elements, a horizontal margin or padding should be added.
72

Web Design & Development - Session 3

More Related Content

What's hot (19)

Similar to Web Design & Development - Session 3 (20)

More from Shahrzad Peyman (11)

Recently uploaded (20)

Web Design & Development - Session 3