Socket Programming Tutorial

Socket Programming Jignesh Patel Palanivel Rathinam connecting processes

Overview Introduction to Sockets A generic Client-Server application Programming Client-Server in C Programming Client-Server in Java References

Introduction to Sockets Why Sockets? Used for Interprocess communication. The Client-Server model Most interprocess communication uses client-server model Client & Server are two processes that wants to communicate with each other The Client process connects to the Server process, to make a request for information/services own by the Server. Once the connection is established between Client process and Server process, they can start sending / receiving information. What are Sockets? End-point of interprocess communication. An interface through which processes can send / receive information Socket

Introduction to Sockets What exactly creates a Socket? <IP address, Port #> tuple What makes a connection? {Source<IP address, Port #> , Destination <IP address, Port #>} i.e. source socket – destination socket pair uniquely identifies a connection. Example Server Client Client 192.168.0.1 192.168.0.2 192.168.0.2 80 1343 5488 Client 192.168.0.3 1343

Introduction to Sockets Socket Types STREAM – uses TCP which is reliable, stream oriented protocol DATAGRAM – uses UDP which is unreliable, message oriented protocol RAW – provides RAW data transfer directly over IP protocol (no transport layer) Sockets can use “ unicast ” ( for a particular IP address destination) “ multicast” ( a set of destinations – 224.x.x.x) “ broadcast ” (direct and limited) “ Loopback ” address i.e. 127.x.x.x

A generic Client-Server application

A generic TCP application algorithm for TCP client Find the IP address and port number of server Create a TCP socket Connect the socket to server (Server must be up and listening for new requests) Send/ receive data with server using the socket Close the connection algorithm for TCP server Find the IP address and port number of server Create a TCP server socket Bind the server socket to server IP and Port number (this is the port to which clients will connect) Accept a new connection from client returns a client socket that represents the client which is connected Send/ receive data with client using the client socket Close the connection with client

A generic UDP application algorithm for UDP client Find the IP address and port number of server Create a UDP socket Send/ receive data with server using the socket Close the connection algorithm for UDP server Find the IP address and port number of server Create a UDP server socket Bind the server socket to server IP and Port number (this is the port to which clients will send) Send/ receive data with client using the client socket Close the connection with client

Programming Client-Server in C

Programming Client-Server in C The steps involved in establishing a socket on the client side are as follows: Create a socket with the socket() system call Connect the socket to the address of the server using the connect() system call Send and receive data using send() and recv() system calls. The steps involved in establishing a socket on the server side are as follows: Create a socket with the socket() system call Bind the socket to an address using the bind() system call. For a server socket on the Internet, an address consists of a port number on the host machine. Listen for connections with the listen() system call Accept a connection with the accept() system call. This call typically blocks until a client connects with the server. Send and receive data

Programming TCP Client in C #include <stdio.h> #include <sys/types.h> #include <sys/socket.h> #include <netinet/in.h> #include <netdb.h> void error(char *msg){ perror(msg); exit(0);} int main(int argc, char *argv[]){ int sockfd, portno, n; struct sockaddr_in serv_addr; struct hostent *server; char buffer[256]; if (argc < 3) { fprintf(stderr,"usage %s hostname port\n", argv[0]); exit(0); } portno = atoi(argv[2]); sockfd = socket(AF_INET, SOCK_STREAM, IPPROTO_TCP); if (sockfd < 0) error("ERROR opening socket"); /* a structure to contain an internet address defined in the include file <netinet/in.h> */ struct sockaddr_in { short sin_family; /* should be AF_INET */ u_short sin_port; struct in_addr sin_addr; char sin_zero[8]; /* not used, must be zero */ }; struct in_addr { unsigned long s_addr; }; Client.c

Programming TCP Client in C #include <stdio.h> #include <sys/types.h> #include <sys/socket.h> #include <netinet/in.h> #include <netdb.h> void error(char *msg){ perror(msg); exit(0);} int main(int argc, char *argv[]){ int sockfd, portno, n; struct sockaddr_in serv_addr; struct hostent *server; char buffer[256]; if (argc < 3) { fprintf(stderr,"usage %s hostname port\n", argv[0]); exit(0); } portno = atoi(argv[2]); sockfd = socket(AF_INET, SOCK_STREAM, IPPROTO_TCP); if (sockfd < 0) error("ERROR opening socket"); Client.c Socket System Call – create an end point for communication #include <sys/types.h> #include <sys/socket.h> int socket(int domain , int type , int protocol ); Returns a descriptor domain : selects protocol family e.g. PF_IPX, PF_X25, PF_APPLETALK type : specifies communication semantics e.g. SOCK_DGRAM, SOCK_RAW protocol : specifies a particular protocol to be used e.g. IPPROTO_UDP, IPPROTO_ICMP

Programming TCP Client in C server = gethostbyname(argv[1]); if (server == NULL) { fprintf(stderr,"ERROR, no such host\n"); exit(0); } bzero((char *) &serv_addr, sizeof(serv_addr)); serv_addr.sin_family = AF_INET; bcopy((char *)server->h_addr, (char *)&serv_addr.sin_addr.s_addr , server->h_length); serv_addr.sin_port = htons(portno); if (connect(sockfd,&serv_addr,sizeof(serv_addr)) < 0) error("ERROR connecting"); printf("Please enter the message: "); bzero(buffer,256); fgets(buffer,255,stdin); n = send(sockfd,buffer,strlen(buffer),0); if (n < 0) error("ERROR writing to socket"); bzero(buffer,256); n = recv(sockfd,buffer,255,0); if (n < 0) error("ERROR reading from socket"); printf("%s\n",buffer); close(sockfd); return 0; } Client.c Connect System Call – initiates a connection on a socket #include <sys/types.h> #include <sys/socket.h> int connect( int sockfd , const struct sockaddr * serv_addr , socklen_t addrlen ); Returns 0 on success sockfd : descriptor that must refer to a socket serv_addr : address to which we want to connect addrlen : length of serv_addr

Programming TCP Client in C server = gethostbyname(argv[1]); if (server == NULL) { fprintf(stderr,"ERROR, no such host\n"); exit(0); } bzero((char *) &serv_addr, sizeof(serv_addr)); serv_addr.sin_family = AF_INET; bcopy((char *)server->h_addr, (char *)&serv_addr.sin_addr.s_addr , server->h_length); serv_addr.sin_port = htons(portno); if (connect(sockfd,&serv_addr,sizeof(serv_addr)) < 0) error("ERROR connecting"); printf("Please enter the message: "); bzero(buffer,256); fgets(buffer,255,stdin); n = send(sockfd,buffer,strlen(buffer),0); if (n < 0) error("ERROR writing to socket"); bzero(buffer,256); n = recv(sockfd,buffer,255,0); if (n < 0) error("ERROR reading from socket"); printf("%s\n",buffer); close(sockfd); return 0; } Client.c Send System Call – send a message to a socket #include <sys/types.h> #include <sys/socket.h> int send( int s , const void * msg , size_t len , int flags ); Returns number of characters sent on success s : descriptor that must refer to a socket in connected state msg : data that we want to send len : length of data flags : use default 0. MSG_OOB, MSG_DONTWAIT

Programming TCP Client in C server = gethostbyname(argv[1]); if (server == NULL) { fprintf(stderr,"ERROR, no such host\n"); exit(0); } bzero((char *) &serv_addr, sizeof(serv_addr)); serv_addr.sin_family = AF_INET; bcopy((char *)server->h_addr, (char *)&serv_addr.sin_addr.s_addr , server->h_length); serv_addr.sin_port = htons(portno); if (connect(sockfd,&serv_addr,sizeof(serv_addr)) < 0) error("ERROR connecting"); printf("Please enter the message: "); bzero(buffer,256); fgets(buffer,255,stdin); n = send(sockfd,buffer,strlen(buffer),0); if (n < 0) error("ERROR writing to socket"); bzero(buffer,256); n = recv(sockfd,buffer,255,0); if (n < 0) error("ERROR reading from socket"); printf("%s\n",buffer); close(sockfd); return 0; } Client.c Recv System Call – receive a message from a socket #include <sys/types.h> #include <sys/socket.h> int recv( int s , const void * buff , size_t len , int flags ); Returns number of bytes received on success s : descriptor that must refer to a socket in connected state buff : data that we want to receive len : length of data flags : use default 0. MSG_OOB, MSG_DONTWAIT

Programming TCP Client in C server = gethostbyname(argv[1]); if (server == NULL) { fprintf(stderr,"ERROR, no such host\n"); exit(0); } bzero((char *) &serv_addr, sizeof(serv_addr)); serv_addr.sin_family = AF_INET; bcopy((char *)server->h_addr, (char *)&serv_addr.sin_addr.s_addr , server->h_length); serv_addr.sin_port = htons(portno); if (connect(sockfd,&serv_addr,sizeof(serv_addr)) < 0) error("ERROR connecting"); printf("Please enter the message: "); bzero(buffer,256); fgets(buffer,255,stdin); n = send(sockfd,buffer,strlen(buffer),0); if (n < 0) error("ERROR writing to socket"); bzero(buffer,256); n = recv(sockfd,buffer,255,0); if (n < 0) error("ERROR reading from socket"); printf("%s\n",buffer); close(sockfd); return 0; } Client.c Close System Call – close a socket descriptor #include <unistd.h> int close( int s ); Returns 0 on success s : descriptor to be closed

Programming TCP Server in C #include <stdio.h> #include <sys/types.h> #include <sys/socket.h> #include <netinet/in.h> void error(char *msg){ perror(msg); exit(0);} int main(int argc, char *argv[]){ int sockfd, newsockfd, portno, clilen; char buffer[256]; struct sockaddr_in serv_addr, cli_addr; int n; if (argc < 2) { fprintf(stderr,"ERROR, no port provided\n"); exit(1); } sockfd = socket(AF_INET, SOCK_STREAM, 0); if (sockfd < 0) error("ERROR opening socket"); bzero((char *) &serv_addr, sizeof(serv_addr)); portno = atoi(argv[1]); serv_addr.sin_family = AF_INET; serv_addr.sin_addr.s_addr = INADDR_ANY; serv_addr.sin_port = htons(portno); Server.c

Programming TCP Server in C if (bind(sockfd, (struct sockaddr *) &serv_addr, sizeof(serv_addr)) < 0) error("ERROR on binding"); listen(sockfd,5); clilen = sizeof(cli_addr); newsockfd = accept(sockfd, (struct sockaddr *) &cli_addr, &clilen); if (newsockfd < 0) error("ERROR on accept"); bzero(buffer,256); n = recv(newsockfd,buffer,255,0); if (n < 0) error("ERROR reading from socket"); printf("Here is the message: %s\n",buffer); n = send(newsockfd,"I got your message",18,0); if (n < 0) error("ERROR writing to socket"); close(newsockfd); close(sockfd); return 0; } Server.c Bind System Call – bind a name to a socket #include <sys/types.h> #include <sys/socket.h> int bind( int sockfd , const struct sockaddr * serv_addr , socklen_t addrlen ); Returns 0 on success sockfd : descriptor that must refer to a socket serv_addr : address to which we want to connect addrlen : length of serv_addr

Programming TCP Server in C if (bind(sockfd, (struct sockaddr *) &serv_addr, sizeof(serv_addr)) < 0) error("ERROR on binding"); listen(sockfd,5); clilen = sizeof(cli_addr); newsockfd = accept(sockfd, (struct sockaddr *) &cli_addr, &clilen); if (newsockfd < 0) error("ERROR on accept"); bzero(buffer,256); n = recv(newsockfd,buffer,255,0); if (n < 0) error("ERROR reading from socket"); printf("Here is the message: %s\n",buffer); n = send(newsockfd,"I got your message",18,0); if (n < 0) error("ERROR writing to socket"); close(newsockfd); close(sockfd); return 0; } Server.c Listen System Call – listen for connections on a socket #include <sys/types.h> #include <sys/socket.h> int listen( int s , int backlog ); Returns 0 on success s : descriptor that must refer to a socket backlog : maximum length the queue for completely established sockets waiting to be accepted addrlen : length of serv_addr

Programming TCP Server in C if (bind(sockfd, (struct sockaddr *) &serv_addr, sizeof(serv_addr)) < 0) error("ERROR on binding"); listen(sockfd,5); clilen = sizeof(cli_addr); newsockfd = accept(sockfd, (struct sockaddr *) &cli_addr, &clilen); if (newsockfd < 0) error("ERROR on accept"); bzero(buffer,256); n = recv(newsockfd,buffer,255,0); if (n < 0) error("ERROR reading from socket"); printf("Here is the message: %s\n",buffer); n = send(newsockfd,"I got your message",18,0); if (n < 0) error("ERROR writing to socket"); close(newsockfd); close(sockfd); return 0; } Server.c Accept System Call – accepts a connection on a socket #include <sys/types.h> #include <sys/socket.h> int accept( int sockfd , const struct sockaddr * addr , socklen_t addrlen ); Returns a non-negative descriptor on success sockfd : descriptor that must refer to a socket addr : filled with address of connecting entity addrlen : length of addr

Programming UDP Client in C The client code for a datagram socket client is the same as that for a stream socket with the following differences. the socket system call has SOCK_DGRAM instead of SOCK_STREAM as its second argument & IPPROTO_UDP instead of IPPROTO_TCP as its third argument. there is no connect() system call instead of send() and recv(), the client uses sendto() and recvfrom() sock = socket(AF_INET, SOCK_DGRAM, IPPROTO_UDP); len = sizeof(struct sockaddr_in); while (1) { /* write */ n = sendto(sock,“Got your message\n",17, 0,(struct sockaddr *) &server, len); f (n < 0) error("sendto"); /* read */ n = recvfrom(sock,buf,1024,0,(struct sockaddr *)&from, len); if (n < 0) error("recvfrom"); }

Programming UDP Server in C Server code with a datagram socket is similar to the stream socket code with following differences. Servers using datagram sockets do not use the listen() or the accept() system calls. After a socket has been bound to an address, the program calls recvfrom() to read a message or sendto() to send a message. sock = socket(AF_INET, SOCK_DGRAM, IPPROTO_UDP); len = sizeof(struct sockaddr_in); while (1) { /* read */ n = recvfrom(sock,buf,1024,0,(struct sockaddr *)&from, len); if (n < 0) error("recvfrom"); /* write */ n = sendto(sock,"Got your message\n",17, 0,(struct sockaddr *)&from, len); f (n < 0) error("sendto"); }

Programming Client-Server in C In case of Windows Everything in the code is same as described previously except the following differences You have to tell your compiler to link in the Winsock library, usually called wsock32.lib or winsock32.lib On Visual C++, this can be done through the Project menu, under Settings.... Click the Link tab, and look for the box titled "Object/library modules". Add "wsock32.lib" to that list. On Visual Studio .NET, add “wsock32.lib” under Project menu, Properties -> Linker -> Input -> Additional Dependencies #include <winsock.h> … .. void main(int argc,char *argv[]){ WSADATA wsda; // if this doesn’t work // WSAData wsda; // then try this WSAStartup(0x0101,&wsda); … .. WSACleanup(); closesocket(sockfd); }

Programming Client-Server in Java

Programming TCP Client-Server in Java All the classes related to sockets are in the java.net package, so make sure to import that package when you program sockets. All the input/output stream classes are in the java.io package, include this also How to open a socket? If you are programming a client, then you would create an object of Socket class Machine name is the machine you are trying to open a connection to, PortNumber is the port (a number) on which the server you are trying to connect to is running. select one that is greater than 1,023! Why?? Socket MyClient; try { MyClient = new Socket("Machine name", PortNumber); } catch (IOException e) { System.out.println(e); }

Programming TCP Client-Server in Java If you are programming a server, then this is how you open a socket: When implementing a server you also need to create a socket object from the ServerSocket in order to listen for and accept connections from clients. ServerSocket MyService; try { MyServerice = new ServerSocket(PortNumber); } catch (IOException e) { System.out.println(e); } Socket clientSocket = null; try { clientSocket = MyService.accept(); } catch (IOException e) { System.out.println(e); }

Programming TCP Client-Server in Java How to create an input stream? On the client side, you can use the DataInputStream class to create an input stream to receive response from the server: The class DataInputStream allows you to read lines of text and Java primitive data types in a portable way. It has methods such as read, readChar, readInt, readDouble, and readLine,. On the server side, you can use DataInputStream to receive input from the client: DataInputStream input; try { input = new DataInputStream(MyClient.getInputStream()); } catch (IOException e) { System.out.println(e); } DataInputStream input; try { input = new DataInputStream(clientSocket.getInputStream()); } catch (IOException e) { System.out.println(e); }

Programming TCP Client-Server in Java How to create an output stream? On the client side, you can create an output stream to send information to the server socket using the class PrintStream or DataOutputStream of java.io: The class PrintStream has methods for displaying textual representation of Java primitive data types. Its write and println methods are important. Also, you may want to use the DataOutputStream: Many of its methods write a single Java primitive type to the output stream. The method writeBytes is a useful one. PrintStream output; try { output = new PrintStream(MyClient.getOutputStream()); } catch (IOException e) { System.out.println(e); } DataOutputStream output; try { output = new DataOutputStream(MyClient.getOutputStream()); } catch (IOException e) { System.out.println(e); }

Programming TCP Client-Server in Java On the server side you can use the class PrintStream to send information to the client. Note: You can use the class DataOutputStream as mentioned previously. PrintStream output; try { output = new PrintStream(clientSocket.getOutputStream()); } catch (IOException e) { System.out.println(e); }

Programming TCP Client-Server in Java How to close sockets? You should always close the output and input stream before you close the socket. On the client side: On the server side: try { output.close(); input.close(); MyClient.close(); } catch (IOException e) { System.out.println(e); } try { output.close(); input.close(); clientSocket.close(); MyService.close(); } catch (IOException e) { System.out.println(e); }

Programming UDP Client-Server in Java How to open a datagram socket? If you are programming a client, then you would create an object of DatagramSocket class If you are programming a server, then this is how you open a socket: try { DatagramSocket socket = new DatagramSocket(); } catch (IOException e) { System.out.println(e); } DatagramSocket socket = null; try { socket = new DatagramSocket(4445); } catch (IOException e) { System.out.println(e); }

Programming UDP Client-Server in Java How to send/receive on Datagram sockets? On the client side, you can use the DatagramPacket class To send data To receive data byte[] buf = new byte[256]; InetAddress address = InetAddress.getByName(args[0]); DatagramPacket packet = new DatagramPacket(buf, buf.length, address, 4445); socket.send(packet); packet = new DatagramPacket(buf, buf.length); socket.receive(packet); String received = new String(packet.getData()); System.out.println(“Received from server: " + received);

Programming UDP Client-Server in Java How to send/receive on Datagram sockets? On the Server side, you can use the DatagramPacket class To receive data To send data How to close a Datagram socket? byte[] buf = new byte[256]; DatagramPacket packet = new DatagramPacket(buf, buf.length); socket.receive(packet); InetAddress address = packet.getAddress(); int port = packet.getPort(); packet = new DatagramPacket(buf, buf.length, address, port); socket.send(packet); socket.close();

References Man pages in Linux Accesssible through following command man 2 <system_call_name> E.g. man 2 socket “ Unix network programming” by Richard Stevens Beej’s guide to Network Programming http://beej.us/guide/bgnet/ The Java Tutorial – Custom Networking http://java.sun.com/docs/books/tutorial/networking/ Lecture notes of cs423 from Dr. Bob Cotter http://www.sce.umkc.edu/~cotterr/cs423_fs05/cs423_fs05_lectures.html

Socket Programming Tutorial

More Related Content

What's hot (20)

Viewers also liked (8)

Similar to Socket Programming Tutorial (20)

More from Jignesh Patel (6)

Recently uploaded (20)

Socket Programming Tutorial