Fundamentals of Programming Chapter 2

CHAPTER 2
PROGRAMMING
LANGUAGES
PROG0101
FUNDAMENTALS OF
PROGRAMMING
Chapter 1
Overview of Computers and Logic
PROG0101
FUNDAMENTALS OF PROGRAMMING
PROG0101
FUNDAMENTALS OF PROGRAMMING
CHAPTER
PROGRAMMING LANGUAGES

2
Computer Program
 A program is a set of instructions following the rules
of the chosen language.
 Without programs, computers are useless.
 A program is like a recipe.
 It contains a list of ingredients (called variables) and
a list of directions (called statements) that tell the
computer what to do with the variables.

3
Programming Language
 A vocabulary and set of grammatical rules (syntax)
for instructing a computer to perform specific tasks.
 Programming languages can be used to create
computer programs.
 The term programming language usually refers to
high-level languages, such as BASIC, C, C++,
COBOL, FORTRAN, Ada, and Pascal.

4
 As human languages are too difficult for a
computer to understand in an unambiguous way,
commands are usually written in one or other
languages specially designed for the purpose.

5
 You eventually need to convert your program into
machine language so that the computer can
understand it.
 There are two ways to do this:
 Compile the program
 Interpret the program

6
 Compile is to transform a program written in a
high-level programming language from source code
into object code.
 This can be done by using a tool called compiler.
 A compiler reads the whole source code and
translates it into a complete machine code program
to perform the required tasks which is output as a
new file.

7
 Interpreter is a program that executes instructions
written in a high-level language.
 An interpreter reads the source code one instruction
or line at a time, converts this line into machine code
and executes it.

8
 Computer programming is the process of writing,
testing, debugging/troubleshooting, and maintaining
the source code of computer programs.
 This source code is written in a programming
language like C++, JAVA, Perl etc.

9
Common Features of All Program
All programs could be structured in the following four
ways:
 Sequences of instructions
 Branches
 Loops
 Modules

10
Sequences of Instructions
The program flows from one
step to the next in strict sequence.

11
Branches
The program reaches a decision
point and if the result of the test is
true then the program performs
the instructions in Path 1, and if
false it performs the actions in
Path 2

12
Loops
The program steps are repeated
continuously until some test condition
is reached, at which point control then
flows past the loop into the next piece of
program logic

13
Modules
The program performs an identical sequence of actions
several times. For convenience these common actions
are placed in a module, which is a kind of mini-program
which can be executed from within the main program.

14
Modules

15
Along with these structures programs also need a few
more features to make them useful:
 Data (we take a closer look at data in the Raw Materials
topic)
 Operations (add, subtract, compare etc)
 Input/Output capability (e.g. to display results)

16
Computer Programmer
 A programmer is someone who writes computer
program.
 Computer programmers write, test, and maintain
programs or software that tell the computer what to
do.

17
What Skills are Required to Become a Programmer?
 Programming - Writing computer programs for
various purposes.
 Writing - Communicating effectively with others in
writing as indicated by the needs of the audience.
 Reading Comprehension - Understanding
written sentences and paragraphs in work-related
documents.
 Critical Thinking - Using logic and analysis to
identify the strengths and weaknesses of different
approaches.

18
 Computers and Electronics - Knowledge of
electric circuit boards, processors, chips, and
computer hardware and software, including
applications and programming.
 Mathematics - Knowledge of numbers, their
operations, and interrelationships including
arithmetic, algebra, geometry, calculus, statistics,
and their applications.
 Oral Expression - The ability to communicate
information and ideas in speaking so others will
understand.

19
 Oral Comprehension - The ability to listen to and
understand information and ideas presented through
spoken words and sentences.
 Written Expression - The ability to communicate
information and ideas in writing so others will
understand.
 Written Comprehension - The ability to read and
understand information and ideas presented in
writing.

20
 Deductive Reasoning - The ability to apply
general rules to specific problems to come up with
logical answers. It involves deciding if an answer
makes sense.
 Information Organization - Finding ways to
structure or classify multiple pieces of information.

21
Generations of Programming Language
 The first generation languages, or 1GL, are low-
level languages that are machine language.
 The second generation languages, or 2GL, are
also low-level languages that generally consist of
assembly languages.
 The third generation languages, or 3GL, are
high-level languages such as C.

22
Generations of Programming Language
 The fourth generation languages, or 4GL, are
languages that consist of statements similar to
statements in a human language. Fourth generation
languages are commonly used in database
programming and scripts.
 The fifth generation languages, or 5GL, are
programming languages that contain visual tools to
help develop a program. A good example of a fifth
generation language is Visual Basic.

23
Types of Programming Language
 There are three types of programming language:
 Machine language (Low-level language)
 Assembly language (Low-level language)
 High-level language
 Low-level languages are closer to the language used
by a computer, while high-level languages are closer
to human languages.

24
Machine Language
 Machine language is a collection of binary digits or
bits that the computer reads and interprets.
 Machine languages are the only languages
understood by computers.
 While easily understood by computers, machine
languages are almost impossible for humans to use
because they consist entirely of numbers.

25
Machine Language
Machine Language
169 1 160 0 153 0 128 153 0 129 153 130 153 0 131
200 208 241 96
High level language
5 FOR I=1 TO 1000: PRINT "A";: NEXT I

26
Machine Language
Example:
 Let us say that an electric toothbrush has a processor
and main memory.
 The processor can rotate the bristles left and right,
and can check the on/off switch.
 The machine instructions are one byte long, and
correspond to the following machine operations:

27
Machine Language
Machine Instruction Machine Operation
0000 0000 Stop
0000 0001 Rotate bristles left
0000 0010 Rotate bristles right
0000 0100 Go back to start of program
0000 1000 Skip next instruction if switch is off

28
Assembly Language
 A program written in assembly language consists of a
series of instructions mnemonics that correspond to
a stream of executable instructions, when translated
by an assembler, that can be loaded into memory
and executed.
 Assembly languages use keywords and symbols,
much like English, to form a programming language
but at the same time introduce a new problem.

29
Assembly Language
 The problem is that the computer doesn't
understand the assembly code, so we need a way to
convert it to machine code, which the computer does
understand.
 Assembly language programs are translated into
machine language by a program called an
assembler.

30
Assembly Language
 Example:
 Machine language :
10110000 01100001
 Assembly language :
mov a1, #061h
 Meaning:
Move the hexadecimal value 61 (97 decimal) into
the processor register named "a1".

31
High Level Language
 High-level languages allow us to write computer code
using instructions resembling everyday spoken language
(for example: print, if, while) which are then
translated into machine language to be executed.
 Programs written in a high-level language need to be
translated into machine language before they can be
executed.
 Some programming languages use a compiler to
perform this translation and others use an interpreter.

32
High-Level Language
 Examples of High-level Language:
• ADA
• C
• C++
• JAVA
• BASIC
• COBOL
• PASCAL
• PHYTON

33
Choosing a Programming Language
Before you decide on what language to use, you should
consider the following:
 your server platform
 the server software you run
 your budget
 previous experience in programming
 the database you have chosen for your backend

34
The Programming Process
Step 1: Defining the problem.
Step 2: Planning the solution.
Step 3: Code the program.
Step 4: Test the program.
Step 5: Document everything.

35
Step 1: Defining the problem
 The task of defining the problem consists of identifying
what it is you know (input-given data), and what it is you
want to obtain (output-the result).
 Eventually, you produce a written agreement that, among
other things, specifies the kind of input, processing, and
output required.

36
Step 1: Defining the problem
Example:
 What must the program do?
 What outputs are required and in what form?
 What inputs are available and in what form?

37
Step 2: Planning the solution
 Two common ways of planning the solution to a problem
are to draw a flowchart and to write pseudocode, or
possibly both.
 A flowchart is a pictorial representation of a step-by-step
solution to a problem.
 It consists of arrows representing the direction the program
takes and boxes and other symbols representing actions.
 It is a map of what your program is going to do and how it
is going to do it.

38
Step 2: Planning the solution
 Pseudocode is an English-like nonstandard language that
lets you state your solution with more precision than you
can in plain English but with less precision than is required
when using a formal programming language.
 Pseudocode permits you to focus on the program logic
without having to be concerned just yet about the precise
syntax of a particular programming language.

39
Step 3: Code the program
 You will translate the logic from the flowchart or
pseudocode-or some other tool-to a programming
language.
 Program Coding means expressing the algorithm developed
for solving a problem, in a programming language.

40
Step 4: Test the program
 Almost all programs may contain a few errors, or bugs.
 Testing is necessary to find out if the program produces a
correct result.
 Usually it is performed with sample data
 Debugging is the process of locating and removing errors

41
Types of Error
Syntax Errors: Violation of syntactic rules in a
Programming Language generates syntax errors.
Effect? Interpreter or Compiler finds it in Syntax Check
Phase.

42
Types of Error
Semantic Errors: Doing logical mistakes causes
semantic errors in Source code.
Effect? Interpreters and Compilers can not notice them,
but on execution, they causes unexpected results.

43
Types of Error
Run-time Errors: Occur on program execution. Mostly
caused by invalid data entry or tries to use not existing
resources.
Effect? It occurs on run time and may crash the
program execution

44
Step 5: Document everything
 Documentation is a written detailed description of the
programming cycle and specific facts about the program.
 Typical program documentation materials include the
origin and nature of the problem, a brief narrative
description of the program, logic tools such as flowcharts
and pseudocode, data-record descriptions, program
listings, and testing results.
 Comments in the program itself are also considered an
essential part of documentation.

Fundamentals of Programming Chapter 2

More Related Content

What's hot (20)

Similar to Fundamentals of Programming Chapter 2 (20)

More from Mohd Harris Ahmad Jaal (20)

Recently uploaded (20)

Fundamentals of Programming Chapter 2