DNPR Driver For CitectSCADA
DNPR Driver For CitectSCADA
The DNPr driver is a native driver able to communicate with any device compliant with the DNP 3.0 standard From January 1, 2006 a Specialty Driver support contract is required to log DNPr support calls
Real-time Intelligence
2
Solution:
Upgrade existing systems to new version of the DNP driver This driver should not be used in new CitectSCADA projects
Support:
This driver is not supported and customers will be asked to upgrade to the new version of the DNP driver Real-time Intelligence
3
Solution:
Where possible, the DNPr driver should be used Driver ships with CitectSCADA v6.1
Support:
Supported by Citect Pty Ltd
From January 2006 a Support contract is required
DNP technical specialists available within Citect Pty Ltd Defects will be prioritized and resolved based on severity Real-time Intelligence
4
Real-time Intelligence
5
Real-time Intelligence
6
Real-time Intelligence
7
Real-time Intelligence
8
I/O Servers communicate with each other to ensure that a unit is active on only I/O Server at one time
Real-time Intelligence
9
DNPr statistics
Bluescope Steel Australia
2 redundant I/O servers connected via TCP/IP to 40 RTUs 2 redundant Alarm/Report/Trend servers 9000 DNP RTU tags 5000 DNP RTU calculated variables 7000 push-based digital alarms 3000 poll-based digital alarms 5000 event trends 6000 periodic trends
220@1s, 20@5s, 3500@60s, 2300@120s
RTU events are populated to the SCADA system at a rate of 220 events per second in peak load situations Real-time Intelligence
10
Iran Khodro Substation Telemetry Kangan Power Plant Mashhad Powerplant Wells Sistan & Baloochestan Dispatching Centre
Real-time Intelligence
11