Ch 14 Single-Station Manufacturing Cells

Sections: 1. Single-Station Manned Workstations 2. Single-Station Automated Cells 3. Applications of Single-Station Cells 4. Analysis of Single-Station Cells

2008 Pearson Education, Inc., Upper Saddle River, NJ. All rights reserved. This material is protected under all copyright laws as they currently exist. No portion of this material may be reproduced, in any form or by any means, without permission in writing from the publisher. For the exclusive use of adopters of the book Automation, Production Systems, and Computer-Integrated Manufacturing, Third Edition, by Mikell P. Groover.

Classification of Single-Station Manufacturing Cells

2008 Pearson Education, Inc., Upper Saddle River, NJ. All rights reserved. This material is protected under all copyright laws as they currently exist. No portion of this material may be reproduced, in any form or by any means, without permission in writing from the publisher. For the exclusive use of adopters of the book Automation, Production Systems, and Computer-Integrated Manufacturing, Third Edition, by Mikell P. Groover.

Single-Station Manufacturing Cells

Most common manufacturing system in industry Operation is independent of other stations Perform either processing or assembly operations Can be designed for: Single model production Batch production Mixed model production

2008 Pearson Education, Inc., Upper Saddle River, NJ. All rights reserved. This material is protected under all copyright laws as they currently exist. No portion of this material may be reproduced, in any form or by any means, without permission in writing from the publisher. For the exclusive use of adopters of the book Automation, Production Systems, and Computer-Integrated Manufacturing, Third Edition, by Mikell P. Groover.

Single-Station Manned Cell

One worker tending one production machine (most common model) Most widely used production method, especially in job shop and batch production Reasons for popularity: Shortest time to implement Requires least capital investment Easiest to install and operate Typically, the lowest unit cost for low production Most flexible for product or part changeovers
2008 Pearson Education, Inc., Upper Saddle River, NJ. All rights reserved. This material is protected under all copyright laws as they currently exist. No portion of this material may be reproduced, in any form or by any means, without permission in writing from the publisher. For the exclusive use of adopters of the book Automation, Production Systems, and Computer-Integrated Manufacturing, Third Edition, by Mikell P. Groover.

Single-Station Manned Cell Examples

Worker operating a standard machine tool Worker loads & unloads parts, operates machine Machine is manually operated Worker operating semi-automatic machine Worker loads & unloads parts, starts semi-automatic work cycle Worker attention not required continuously during entire work cycle Worker using hand tools or portable power tools at one location
2008 Pearson Education, Inc., Upper Saddle River, NJ. All rights reserved. This material is protected under all copyright laws as they currently exist. No portion of this material may be reproduced, in any form or by any means, without permission in writing from the publisher. For the exclusive use of adopters of the book Automation, Production Systems, and Computer-Integrated Manufacturing, Third Edition, by Mikell P. Groover.

Variations of Single-Station Manned Cell

Two (or more) workers required to operate machine Two workers required to manipulate heavy forging at forge press Welder and fitter in arc welding work cell One principal production machine plus support equipment Drying equipment for a manually operated injection molding machine Trimming shears at impression-die forge hammer to trim flash from forged part

2008 Pearson Education, Inc., Upper Saddle River, NJ. All rights reserved. This material is protected under all copyright laws as they currently exist. No portion of this material may be reproduced, in any form or by any means, without permission in writing from the publisher. For the exclusive use of adopters of the book Automation, Production Systems, and Computer-Integrated Manufacturing, Third Edition, by Mikell P. Groover.

Single-Station Automated Cell

Fully automated production machine capable of operating unattended for longer than one work cycle Worker not required except for periodic tending Reasons why it is important: Labor cost is reduced Easiest and least expensive automated system to implement Production rates usually higher than manned cell First step in implementing an integrated multi-station automated system
2008 Pearson Education, Inc., Upper Saddle River, NJ. All rights reserved. This material is protected under all copyright laws as they currently exist. No portion of this material may be reproduced, in any form or by any means, without permission in writing from the publisher. For the exclusive use of adopters of the book Automation, Production Systems, and Computer-Integrated Manufacturing, Third Edition, by Mikell P. Groover.

Enablers for Unattended Cell Operation

For single model and batch model production: Programmed operation for all steps in work cycle Parts storage subsystem Automatic loading, unloading, and transfer between parts storage subsystem and machine Periodic attention of worker for removal of finished work units, resupply of starting work units, and other machine tending Built-in safeguards to avoid self-destructive operation or damage to work units or unsafe to workers
2008 Pearson Education, Inc., Upper Saddle River, NJ. All rights reserved. This material is protected under all copyright laws as they currently exist. No portion of this material may be reproduced, in any form or by any means, without permission in writing from the publisher. For the exclusive use of adopters of the book Automation, Production Systems, and Computer-Integrated Manufacturing, Third Edition, by Mikell P. Groover.

Enablers for Unattended Cell Operation

For mixed model production: All of the preceding enablers, plus: Work unit identification: Automatic identification (e.g., bar codes) or sensors that recognize alternative features of starting units If starting units are the same, work unit identification is unnecessary Capability to download programs for each work unit style (programs prepared in advance) Capability for quick changeover of physical setup
2008 Pearson Education, Inc., Upper Saddle River, NJ. All rights reserved. This material is protected under all copyright laws as they currently exist. No portion of this material may be reproduced, in any form or by any means, without permission in writing from the publisher. For the exclusive use of adopters of the book Automation, Production Systems, and Computer-Integrated Manufacturing, Third Edition, by Mikell P. Groover.

Parts Storage Subsystem and Automatic Parts Transfer

Are necessary conditions for unattended operation Given a capacity = np parts in the storage subsystem, the cell can theoretically operate for a time UT = npTc where UT = unattended time of operation In reality, unattended time will be less than UT because the worker needs time to unload finished parts and load raw workparts into the storage subsystem

2008 Pearson Education, Inc., Upper Saddle River, NJ. All rights reserved. This material is protected under all copyright laws as they currently exist. No portion of this material may be reproduced, in any form or by any means, without permission in writing from the publisher. For the exclusive use of adopters of the book Automation, Production Systems, and Computer-Integrated Manufacturing, Third Edition, by Mikell P. Groover.

10

Parts Storage Capacity

Typical objectives in defining the desired parts storage capacity np: Make npTc = a fixed time interval that allows one worker to tend multiple machines Make npTc = time between scheduled tool changes Make npTc = one complete shift Make npTc = one overnight (lights-out operation)
The time of unattended operation increases directly with storage capacity, so there is an advantage to designing the storage subsystem with sufficient capacity to satisfy the plants operational objectives.
2008 Pearson Education, Inc., Upper Saddle River, NJ. All rights reserved. This material is protected under all copyright laws as they currently exist. No portion of this material may be reproduced, in any form or by any means, without permission in writing from the publisher. For the exclusive use of adopters of the book Automation, Production Systems, and Computer-Integrated Manufacturing, Third Edition, by Mikell P. Groover.

11

Storage Capacity of One Part

Example: two-position automatic pallet changer (APC) With no pallet changer, work cycle elements of loading/unloading and processing would have to be performed sequentially Tc = Tm + Ts where Tm = machine time and Ts = worker service time With pallet changer, work cycle elements can be performed simultaneously Tc = Max{Tm, Ts} + Tr where Tr = repositioning time of pallet changer
2008 Pearson Education, Inc., Upper Saddle River, NJ. All rights reserved. This material is protected under all copyright laws as they currently exist. No portion of this material may be reproduced, in any form or by any means, without permission in writing from the publisher. For the exclusive use of adopters of the book Automation, Production Systems, and Computer-Integrated Manufacturing, Third Edition, by Mikell P. Groover.

12

CNC Machining Center with Automatic Pallet Changer - Stores One Part

2008 Pearson Education, Inc., Upper Saddle River, NJ. All rights reserved. This material is protected under all copyright laws as they currently exist. No portion of this material may be reproduced, in any form or by any means, without permission in writing from the publisher. For the exclusive use of adopters of the book Automation, Production Systems, and Computer-Integrated Manufacturing, Third Edition, by Mikell P. Groover.

13

Storage Capacities Greater Than One

Machining centers: Various designs of parts storage unit interfaced to automatic pallet changer (or other automated transfer mechanism) Turning centers: Industrial robot interface with parts carousel Plastic molding or extrusion: Hopper contains sufficient molding compound for unattended operation Sheet metal stamping: Starting material is sheet metal coil
2008 Pearson Education, Inc., Upper Saddle River, NJ. All rights reserved. This material is protected under all copyright laws as they currently exist. No portion of this material may be reproduced, in any form or by any means, without permission in writing from the publisher. For the exclusive use of adopters of the book Automation, Production Systems, and Computer-Integrated Manufacturing, Third Edition, by Mikell P. Groover.

14

Storage Capacities Greater Than One

Machining center and automatic pallet changer with pallet holders arranged radially; parts storage capacity = 5
2008 Pearson Education, Inc., Upper Saddle River, NJ. All rights reserved. This material is protected under all copyright laws as they currently exist. No portion of this material may be reproduced, in any form or by any means, without permission in writing from the publisher. For the exclusive use of adopters of the book Automation, Production Systems, and Computer-Integrated Manufacturing, Third Edition, by Mikell P. Groover.

15

Storage Capacities Greater Than One

Machining center and in-line shuttle cart system with pallet holders along its length; parts storage capacity = 16
2008 Pearson Education, Inc., Upper Saddle River, NJ. All rights reserved. This material is protected under all copyright laws as they currently exist. No portion of this material may be reproduced, in any form or by any means, without permission in writing from the publisher. For the exclusive use of adopters of the book Automation, Production Systems, and Computer-Integrated Manufacturing, Third Edition, by Mikell P. Groover.

16

Storage Capacities Greater Than One

Machining center with pallets held on indexing table; parts storage capacity = 6
2008 Pearson Education, Inc., Upper Saddle River, NJ. All rights reserved. This material is protected under all copyright laws as they currently exist. No portion of this material may be reproduced, in any form or by any means, without permission in writing from the publisher. For the exclusive use of adopters of the book Automation, Production Systems, and Computer-Integrated Manufacturing, Third Edition, by Mikell P. Groover.

17

Storage Capacities Greater Than One

Machining center and parts storage carousel with parts loaded onto pallets; parts storage capacity = 12
2008 Pearson Education, Inc., Upper Saddle River, NJ. All rights reserved. This material is protected under all copyright laws as they currently exist. No portion of this material may be reproduced, in any form or by any means, without permission in writing from the publisher. For the exclusive use of adopters of the book Automation, Production Systems, and Computer-Integrated Manufacturing, Third Edition, by Mikell P. Groover.

18

Applications of Single Station Manned Cells

CNC machining center (MC) with worker to load/unload CNC turning center (TC) with worker to load/unload Cluster of two CNC turning centers with time sharing of one worker to load/unload Plastic injection molding on semi-automatic cycle with worker to unload molding, sprue, and runner One worker at electronics subassembly workstation inserting components into PCB Stamping press with worker loading blanks and unloading stampings each cycle
2008 Pearson Education, Inc., Upper Saddle River, NJ. All rights reserved. This material is protected under all copyright laws as they currently exist. No portion of this material may be reproduced, in any form or by any means, without permission in writing from the publisher. For the exclusive use of adopters of the book Automation, Production Systems, and Computer-Integrated Manufacturing, Third Edition, by Mikell P. Groover.

19

Applications of Single Station Automated Cells

CNC MC with APC and parts storage subsystem CNC TC with robot and parts storage carousel Cluster of ten CNC TCs, each with robot and parts storage carousel, and time sharing of one worker to load/unload the carousels Plastic injection molding on automatic cycle with robot arm to unload molding, sprue, and runner Electronics assembly station with automated insertion machine inserting components into PCBs Stamping press stamps parts from long coil
2008 Pearson Education, Inc., Upper Saddle River, NJ. All rights reserved. This material is protected under all copyright laws as they currently exist. No portion of this material may be reproduced, in any form or by any means, without permission in writing from the publisher. For the exclusive use of adopters of the book Automation, Production Systems, and Computer-Integrated Manufacturing, Third Edition, by Mikell P. Groover.

20

CNC Machining Center

Machine tool capable of performing multiple operations that use rotating tools on a workpart in one setup under NC control Typical operations: milling, drilling, and related operations Typical features to reduce nonproductive time: Automatic tool changer Automatic workpart positioning Automatic pallet changer

2008 Pearson Education, Inc., Upper Saddle River, NJ. All rights reserved. This material is protected under all copyright laws as they currently exist. No portion of this material may be reproduced, in any form or by any means, without permission in writing from the publisher. For the exclusive use of adopters of the book Automation, Production Systems, and Computer-Integrated Manufacturing, Third Edition, by Mikell P. Groover.

21

CNC Horizontal Machining Center

2008 Pearson Education, Inc., Upper Saddle River, NJ. All rights reserved. This material is protected under all copyright laws as they currently exist. No portion of this material may be reproduced, in any form or by any means, without permission in writing from the publisher. For the exclusive use of adopters of the book Automation, Production Systems, and Computer-Integrated Manufacturing, Third Edition, by Mikell P. Groover.

22

CNC Turning Center

Machine tool capable of performing multiple operations on a rotating workpart in one setup under NC control Typical operations: Turning and related operations, e.g., contour turning Drilling and related operations along workpart axis of rotation

2008 Pearson Education, Inc., Upper Saddle River, NJ. All rights reserved. This material is protected under all copyright laws as they currently exist. No portion of this material may be reproduced, in any form or by any means, without permission in writing from the publisher. For the exclusive use of adopters of the book Automation, Production Systems, and Computer-Integrated Manufacturing, Third Edition, by Mikell P. Groover.

23

CNC Turning Center

2008 Pearson Education, Inc., Upper Saddle River, NJ. All rights reserved. This material is protected under all copyright laws as they currently exist. No portion of this material may be reproduced, in any form or by any means, without permission in writing from the publisher. For the exclusive use of adopters of the book Automation, Production Systems, and Computer-Integrated Manufacturing, Third Edition, by Mikell P. Groover.

24

Automated Stamping Press

Stamping press on automatic cycle producing stampings from sheet metal coil
2008 Pearson Education, Inc., Upper Saddle River, NJ. All rights reserved. This material is protected under all copyright laws as they currently exist. No portion of this material may be reproduced, in any form or by any means, without permission in writing from the publisher. For the exclusive use of adopters of the book Automation, Production Systems, and Computer-Integrated Manufacturing, Third Edition, by Mikell P. Groover.

25

CNC Mill-Turn Center

Machine tool capable of performing multiple operations either with single point turning tools or rotating cutters in one setup under NC control Typical operations: Turning, milling, drilling and related operations Enabling feature: Capability to control position of c-axis in addition to xand z-axis control (turning center is limited to x- and zaxis control)

2008 Pearson Education, Inc., Upper Saddle River, NJ. All rights reserved. This material is protected under all copyright laws as they currently exist. No portion of this material may be reproduced, in any form or by any means, without permission in writing from the publisher. For the exclusive use of adopters of the book Automation, Production Systems, and Computer-Integrated Manufacturing, Third Edition, by Mikell P. Groover.

26

Part with Mill-Turn Features

Example part with turned, milled, and drilled features

2008 Pearson Education, Inc., Upper Saddle River, NJ. All rights reserved. This material is protected under all copyright laws as they currently exist. No portion of this material may be reproduced, in any form or by any means, without permission in writing from the publisher. For the exclusive use of adopters of the book Automation, Production Systems, and Computer-Integrated Manufacturing, Third Edition, by Mikell P. Groover.

27

Sequence of Operations of a Mill-Turn Center for Example Part

(1) Turn smaller diameter, (2) mill flat with part in programmed angular positions, four positions for square cross section; (3) drill hole with part in programmed angular position, and (4) cutoff of the machined piece
2008 Pearson Education, Inc., Upper Saddle River, NJ. All rights reserved. This material is protected under all copyright laws as they currently exist. No portion of this material may be reproduced, in any form or by any means, without permission in writing from the publisher. For the exclusive use of adopters of the book Automation, Production Systems, and Computer-Integrated Manufacturing, Third Edition, by Mikell P. Groover.

28