Scribd Logo
Upload

Welcome to Scribd!

  • 430 views

    LTE eNodeB Commissioning

    Uploaded by

    John Ray Manao
    This document provides instructions for commissioning an LTE eNodeB using a USB drive. It describes preparing the USB drive with the necessary software and configuration files, inserting the USB into the eNodeB, powering on the eNodeB to allow it to upgrade and configure itself, and checking the status LEDs to ensure successful commissioning. It also provides steps for connecting a laptop to the eNodeB and performing additional status checks and configuration tasks via the laptop browser interface.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PPTX, PDF, TXT or read online from Scribd

    LTE eNodeB Commissioning

    Uploaded by

    John Ray Manao
    430 views23 pages
    This document provides instructions for commissioning an LTE eNodeB using a USB drive. It describes preparing the USB drive with the necessary software and configuration files, inserting the USB into the eNodeB, powering on the eNodeB to allow it to upgrade and configure itself, and checking the status LEDs to ensure successful commissioning. It also provides steps for connecting a laptop to the eNodeB and performing additional status checks and configuration tasks via the laptop browser interface.

    Copyright

    © Attribution Non-Commercial (BY-NC)

    Available Formats

    PPTX, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides instructions for commissioning an LTE eNodeB using a USB drive. It describes preparing the USB drive with the necessary software and configuration files, inserting the USB into the eNodeB, powering on the eNodeB to allow it to upgrade and configure itself, and checking the status LEDs to ensure successful commissioning. It also provides steps for connecting a laptop to the eNodeB and performing additional status checks and configuration tasks via the laptop browser interface.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PPTX, PDF, TXT or read online from Scribd
    Download as pptx, pdf, or txt
    430 views23 pages

    LTE eNodeB Commissioning

    Uploaded by

    John Ray Manao
    This document provides instructions for commissioning an LTE eNodeB using a USB drive. It describes preparing the USB drive with the necessary software and configuration files, inserting the USB into the eNodeB, powering on the eNodeB to allow it to upgrade and configure itself, and checking the status LEDs to ensure successful commissioning. It also provides steps for connecting a laptop to the eNodeB and performing additional status checks and configuration tasks via the laptop browser interface.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PPTX, PDF, TXT or read online from Scribd
    Download as pptx, pdf, or txt
    of 23

    LTE eNdoeB Commissioning

    On completion of this course, you should be able to: Know the way to do the commissioning with USB Know the commissioning procedure

    Preparation before going to the site


    a) Get USB Stick >256MB (Recommended models: Netac U208, Netac U180, Netac U215, and Netac U210) b) The USB storage device has no additional function. The additional functions include but are not limited to encryption, antivirus, bootstrap, MP3, MP4, and smart mobile phone.

    c) When you save the eNodeB software and data configuration file to the USB storage device, ensure that the locking switch on the USB storage device is disabled.
    d) eNodeB software is copied to USB:/eNodeB/software/ (Software is already stored on the USB Stick for Subcontractors)

    Preparation before going to the site

    d) eNodeB software is copied to USB:/eNodeB/software/ (Software is already stored on the USB Stick for Subcontractors)

    e) Subcontractor will get eNodeB configuration script and PreInfo.xml from Huawei engineer and then copy it to USB directory : /eNodeB/

    Preparation before going to the site


    The USB final directory structure looks like this

    Note: The name of the configuration file must be CFGDATA.xml Please verify the eNodeB ID and Name by opening the CFG file before the Commissioning (right-click on file and select edit)!!!

    Software&Configuration File

    Software&Configuration File
    a) Ensure that RRU has been already powered on and connected with BBU by CPRI fiber cable. Check eNodeB hardware and make sure that the LED light is normal.

    LED RUN LED on each board in the BBU


    Status of the ALM LEDs on the LMPT, LBBP, UTRP STATE LED on the FAN of the BBU3900 CPRI LED on the LBBP VSWR LED on the RRU or LRFU

    Status Blinking (ON for 1s and OFF for 1s)


    OFF

    Blinking (green, ON for 1s and OFF for 1s) ON (green) OFF

    Software Upgrading and Data Configuration


    Insert the USB disk into the USB port on the LMPT of the BBU3900.

    Power on the eNodeB After the eNodeB is started, it automatically upgrades the software and download the data configuration file. LED will be flashing fast on both USB and LMPT board (RUN). After about 20 minutes, check the status of the LED on the USB disk. LED being red for long means the upgrade succeeds. After Checking the Status of LEDs and ensuring that the eNodeB is running properly, Unplug the USB disk.

    eNodeB Commissioning Tasks


    Connection of PC/Laptop to eNodeB
    a) Connect PC to eNodeb ETH port with Ethernet cable

    b) Change IP settings of Laptop as seen below & disable any proxy server settings

    eNodeB Commissioning Tasks


    d) Open Internet Explorer and type in 192.168.0.49 to login to eNodeB Username:admin // Password:admin123

    eNodeB Commissioning Tasks


    d) Open SFTP tool Then set the FTP server setting in your laptop.

    eNodeB Commissioning Tasks


    e) Click OK. If this message appears during the WebLMT Start, a Software Supplement needs to be done

    eNodeB Commissioning Tasks


    Supplement Software
    a) Check Software Version (LST VER:;) Updated Software Version has to be V100R003C00SPC300. b) Check Software Areas (LST SOFTWARE:;) -Main Area is the active Software Area c) activate the SFTP server. d) Supplement Software ( SPL SOFTWARE) Supplement Software can be done remotely via M2000 or locally via WebLMT, it will take approx.5-15Min.

    eNodeB Commissioning Tasks


    FTP Server Directory Name could be the Folder of the USB Stick USB:/eNodeB/software/ or a folder on the Laptop with the Software files. User Password:admin

    eNodeB Status Check


    e) Check Supplement Software Progress (Progress needs to be 100%)

    f) Open Internet Explorer and type in 192.168.0.49 to re-login to eNodeB again Username:admin Password:admin123 *Notes: If you are prompted to change the password, please change to Enodeb123

    eNodeB Status Check


    Install New license

    List license by typing LST LICENSE.

    eNodeB Status Check


    5.1 Hardware & Cell Status a) Display Board Information. (DSP BRD:;) - //only 1 LBBPc Board in Slot 3 will be used, all additional LBBPc Boards need to be removed and returned to Huawei

    eNodeB Status Check


    b) Display Optical Port Informations (DSP CPRIPORT:;)

    eNodeB Status Check


    e) Check RRU (LST RRU:;)

    d) Check Cell Status (DSP CELL:;)

    e) Check Active Alarms via MML command (LST ALMAF:;) , there should be no active alarm.

    f) Check Active Alarms by clicking on Alarm Tab, then Engineering should be the same alarm status as in alarm list)

    Backup the eNodeB Configuration File


    a) Backup the eNodeB Configuration File (BKP CFGFILE:;) only LMT.xml will be updated

    Backup the eNodeB Configuration File


    a) Backup the eNodeB Configuration File (BKP CFGFILE:;) only LMT.DBS will be updated

    THANK YOU

    You might also like