Scribd
Upload
90 views26 pages

Zigbee Based Wireless Digital Notice Board

This document describes the development of a Zigbee-based wireless digital notice board. It discusses the limitations of conventional wired LED boards and proposes a wireless solution using the Zigbee protocol for faster, more dynamic communication. The system uses an AT89C52 microcontroller and XBee RF modules to transmit data between the MCU unit and SCM unit's 6x32 LED dot matrix displays. Software was developed for serial interfacing, font creation, and simulating the display. The implementation aims to provide a low-cost, low-power wireless replacement for traditional wired LED boards.

Uploaded by

Chyavan Tulasi
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
90 views26 pages

Zigbee Based Wireless Digital Notice Board

This document describes the development of a Zigbee-based wireless digital notice board. It discusses the limitations of conventional wired LED boards and proposes a wireless solution using the Zigbee protocol for faster, more dynamic communication. The system uses an AT89C52 microcontroller and XBee RF modules to transmit data between the MCU unit and SCM unit's 6x32 LED dot matrix displays. Software was developed for serial interfacing, font creation, and simulating the display. The implementation aims to provide a low-cost, low-power wireless replacement for traditional wired LED boards.

Uploaded by

Chyavan Tulasi
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
You are on page 1/ 26

Zigbee based wireless digital notice board

. Click to edit Master subtitle style Presented by: T.Avinash 08L31A0480 P.Siddartha 08L31A0460 V.Aditya 08L31A0483 R.Prasad 07L31A0470

4/14/12

Introduction
LED display:
A symbol of modernization Information transfer Beautification of living environment Useful in industries Advantage of small volume.

4/14/12

Conventional LED boards


Serial port communication RS-232 protocol Communication is wired Only one master (controller) Communication is slow Need wiring a barrier for dynamic

upgrading.

4/14/12

Solution ?
Wireless Fast Easily changeable (more Dynamic) Less costly Wireless implies battery based supply Less power consuming

4/14/12

System overall structure

Zigbee based interface

4/14/12

Why AT89C52?
Strong anti-interference ability Highly cost effective Low voltage high performance High-density non-volatile memory On-chip flash storage option Easy to obtain a SCM (single chip

microcomputer) control system.

4/14/12

The SCM unit


Zigbee transmit and receive unit AT89C52 chip Clock circuit . Reset circuit Column scan driver circuit Line driver circuit Six 32x32 LED dot matrix
4/14/12

The MCU unit

4/14/12

Software The main processes


process.

4/14/12

The interrupt subroutine

4/14/12

The Driver
Generates codes in hex for each of the

characters interface

Uses a simple VB Message read on

EEPROM.

4/14/12

How are the codes obtained


Scan the bulbs to be switched on Number the rows and columns Say the LEDs to be switched are a 1 Something of this kind appears

4/14/12

Example codes.

4/14/12

VB for interface
The three softwares One for serial interface
This connects Zigbee system.

One for the expected output One to create the fonts


With this we can create a personalized font Languages like telugu and special symbols can

be created and displayed.

4/14/12

Data transmission
Wireless Zigbee Meets IEEE 802.15.4 standards Xbee RF modules used Transmitter interfaced via serial port

4/14/12

XBee
IEEE 802.15.4 systems Low-power wireless sensor networks Clock output for single crystal systems RX (receiving frame, -50 dBm) 18.5 mA TX 33.6 mA @ +5 dBm <1A in power down

4/14/12

Microcontroller support 6 configurable IO pins


Interrupt generator Automatic CRC Frame filtering and processing engine

4/14/12

Key features
Indoor/Urban: up to 100 (30 m) Outdoor line-of-sight: up to 300 (90 m) Transmit Power: 1 mW (0 dBm) Receiver Sensitivity: -92 RF Data Rate: 250,000 bps Free X-CTU Software (Testing and

configuration software)

4/14/12

Interfacing with RS-232


Designed for this purpose Does not require soldering Can also be interfaced using USB Surface mounting

4/14/12

RF module operation
UART data flow

4/14/12

Serial data flow


Same as the RS-232 protocol Start-Data-Stop.

4/14/12

Development and support


Proteus lite Mikro C Ember app builder Packages by digikey.org Keil vision

4/14/12

What we developed?
A software to write data to the serial port A software to create new fonts Full code for the MC to operate Zigbee (Xbee) interfacing program A simulation program to see how its going to

display.

4/14/12

How it looks

4/14/12

THANK YOU

4/14/12

4/14/12

You might also like