COMP1111

Introduction to Information Technology

Lecture # 05 Number Systems

Instructor: Dr. Aftab Akram (PhD CS)

Assistant Professor
Computers and Number
Systems
• Computer is a binary machine.
• Every thing inside Computer is represented by 0 or
1.
• i.e., Binary Number System (Base-2) is used in
Computers.
• In routine life we use Decimal Number System
(Base-10), i.e.,10 digits from 0 to 9.
• However, Otcal (Base-8) and Hexdecimal (Base-16)
are also used in Computers, e.g., representing
Computer’s memory
Conversion between
Systems
• First, we need to understand why there are Binary
Computers?
• Why Decimal Computers weren’t built?
• Binary Number System has two digits, i.e., 0 & 1.
• Plenty of ways to represent Binary digits:
• Using a transistor, ON & OFF
• Using a capacitor, CHARGED & DISCHARGED
• Using magnetic poles orientation: N-N or S-S & N-S
• Difficult to build a device that can represent 10
distinct levels with same accuracy.
Conversion between
Systems
• However, building Binary Computers is not easy.
• Since, all real world information need to be
converted into Binary, and then back
again.
• This makes building and operating Binary
Computers quite difficult.
• However, common user does not need to
do this.
• The Computer System includes a mechanism which
does this automatically.
• Each time we use Computer this process is
 Conversion between
Systems Step 1.
Step 2.
The user presses
the capital letter An electronic signal for
D (shift+D the capital letter D is
key) on the sent to the system unit.
keyboard.

Step 4. Step 3.
After processing, the binary The signal for the capital
code for the capital letter D letter D is converted to its
is converted to an image, ASCII binary code
and displayed on the output (01000100) and is stored
device. in memory for processing.
Understanding Number
Systems
• A number system is a system representing
numbers.
• It is also called the system of numeration and it
defines a set of values to represent a quantity.
• The value of any digit in a number can be
determined by a digit, its position in the number,
and the base of the number system.
• The numbers are represented in a unique manner
and allow us to operate arithmetic operations like
addition, subtraction, and division.
Types of Number
Systems
• There are different types of number systems in
which the four main types are as follows.
• Binary number system (Base - 2)
• Octal number system (Base - 8)
• Decimal number system (Base - 10)
• Hexadecimal number system (Base - 16)
Types of Number
Systems
Conversion between
Systems
• A number can be converted from one number
system to another number system using number
system formulas.
• Typically, we need to learn how to convert numbers
between Binary and Decimal Number Systems
• Since, this type of conversion will be used mostly in
Computer operations.
Conversion of Binary to
Decimal Number System
• To convert a number from the binary to the decimal
system, we use the following steps:
• Step 1: Multiply each digit of the given number, starting
from the rightmost digit, with the exponents of the base
(e.g., base of Binary Number System is 2).
• Step 2: The exponents should start with 0 and increase
by 1 every time we move from right to left.
• Step 3: Simplify each of the above products and add
them.
Conversion of Binary to
Decimal Number System
•Example: Convert 1001112 into the decimal system.
• Solution:
• Step 1: Identify the base of the given number. Here, the
base of 1001112 is 2.
• Step 2: Multiply each digit of the given number, starting
from the rightmost digit, with the exponents of the
base.
Conversion of Binary to
Decimal Number System
Conversion of Binary to
Decimal Number System
• Step 3: We just simplify each of the above products
and add them.
Conversion of Binary to
Decimal Number System
100111 = (1 × 25) + (0 × 24) + (0 × 23) + (1 × 22) + (1 × 21) + (1 × 20)
= (1 × 32) + (0 × 16) + (0 × 8) + (1 × 4) + (1 × 2) + (1 × 1)
= 32 + 0 + 0 + 4 + 2 + 1
= 39
Thus, 1001112 = 3910.
Conversion of Decimal Number
System to Binary / Octal /
Hexadecimal Number System
•Example: Convert 432010 into the octal system.
• Solution:
• Step 1: Identify the base of the required number. Since
we have to convert the given number into the octal
system, the base of the required number is 8.
• Step 2: Divide the given number by the base of the
required number and note down the quotient and the
remainder in the quotient-remainder form.
• Repeat this process (dividing the quotient again by the
base) until we get the quotient less than the base.
Conversion of Decimal Number
System to Binary / Octal /
Hexadecimal Number System
Conversion of Decimal Number System
to Binary / Octal / Hexadecimal
Number System

• Step 3: The given number in the octal number

system is obtained just by reading all the
remainders and the last quotient from bottom to
top.

•Therefore, 432010 = 103408

Conversion from Binary Number
System to Octal/ Hexadecimal
Number System
• To convert a number from Binary to Octal or
Hexadecimal Number System, we can use a long
method and a direct method.
• In long method, we use technique used to convert from
Binary to Decimal, then Decimal to Octal or
Hexadeicmal.
• A short or direct method is useful when you have some
practice to convert from Binary to Decimal. We make
groups of 3 or 4 bits, and then convert it to
decimal number system.
Conversion from Binary Number
System to Octal/ Hexadecimal
Number System (Long Method)
•Example: Convert 10101111002 to the hexadecimal
system.
• Solution:
• Step 1: Convert this number to the decimal number
system as explained in the above process.
Conversion from Binary Number
System to Octal/ Hexadecimal
Number System (Long Method)

•Thus, 10101111002 = 70010 → (1)

Conversion from Binary Number
System to Octal/ Hexadecimal
Number System (Long Method)
• Step 2: Convert the above number (which is in the
decimal system), into the required number system
(hexadecimal).

•Thus, 70010 = 2BC16 → (2)

•From the equations (1) and (2), 10101111002 =
2BC16
Conversion from Binary Number
System to Octal/ Hexadecimal
Number System (Direct Method)
• In Direct method, we make groups of 3 or 4 bits
depending on the conversion to Octal or
Hexadecimal Number System.
•Example: Convert 10101111002 to the Octal
system.
• Step 1: Make groups of 3 bits starting from
right most bit.
001 010 111 100
(You may enter extra zeros on the left if less than 3
digits)
Conversion from Binary Number
System to Octal/ Hexadecimal
Number System (Direct Method)
• Step 2: Convert each group to equivalent decimal
numbers.

001 010 111 100

1 2 7 4

• Step 3: Combine these numbers get desired octal

number 12748
Conversion from Binary Number
System to Octal/ Hexadecimal
Number System (Direct Method)
•Exercise: Convert 10101111002 to Hexadecimal
using direct method.
Encoding
Techniques
• The process of conversion of data from one form to
another form is known as Encoding.
• It is used to transform the data so that data can be
supported and used by different systems.
• Encoding is used in mainly two fields:
• Encoding in Electronics: In electronics, encoding refers
to converting analog signals to digital signals, and
back again.
• Encoding in Computing: In computing, encoding is a
process of converting data to an equivalent binary
form.
Type of Encoding Technique
in Computing

Types of Encoding
Techniques

Image, Audio, Video

Character Encoding
Encoding
Character
Encoding
• Character encoding encodes characters into bytes.
• It informs the computers how to interpret the zero and
ones into real characters, numbers, and symbols.
• The computer understands only binary data; hence it is
required to convert these characters into numeric codes.
• To achieve this, each character is converted into binary
code.
• It can be done by pairing numbers with characters.
• Character encoding makes sure that each character
has
a proper representation in computer or binary format.
Types of Character
Encoding Techniques
• HTML Encoding
• HTML encoding is used to display an HTML page in a
proper format.
• With encoding, a web browser gets to know that which
character set to be used.
• URL Encoding
• URL (Uniform resource locator) Encoding is used
to convert characters in such a format that they can be
transmitted over the internet.
• It is also known as percent-encoding.
• Percent-encoding is a mechanism to encode 8-bit
characters that have specific meaning in the context of
URLs.
Types of Character
Encoding Techniques
• ASCII Encoding
• American Standard Code for Information Interchange
• ASCII is a type of character-encoding.
• It was the first character encoding standard released in the year
1963.
• ASCII code is used to represent English characters as
numbers, where each letter is assigned with a number
from 0 to 127.
• Most modern character-encoding schemes are based on
ASCII, though they support many additional characters.
• It is a single byte encoding only using the bottom 7 bits.
• In an ASCII file, each alphabetic, numeric, or special
character is represented with a 7-bit binary number.
• Each character of the keyboard has an equivalent ASCII
value.
Types of Character
Encoding Techniques
• The first thirty-two codes (numbers 0-31 decimal) in ASCII
are reserved for control characters: codes that may not
themselves represent information, but that are used to
control devices (such as printers) that make use of ASCII.
• For example, character 10 represents the "line feed"
function (which causes a printer to advance its paper), and
character 27 represents the "escape" key found on the top
left of common keyboards.
• Code 32 is the "space" character, denoting the space
between words, which is produced by the large space bar of
a keyboard.
• Codes 33 to 127 are called the printable characters, which
represent letters, digits, punctuation marks, and a few
miscellaneous symbols.
Types of Character
Encoding Techniques
• Unicode Encoding
• Unicode is an encoding standard for a universal
character set.
• It allows encoding, represent, and handle the text
represented in most of the languages or writing systems
that are available worldwide.
• It provides a code point or number for each character in
every supported language.
• It can represent approximately all the possible
characters possible in all the languages.
• A UNICODE standard can use 8, 16, or 32 bits to
represent the characters.
Types of Character
Encoding Techniques
• The Unicode standard defines Unicode Transformation
Format (UTF) to encode the code points.
• UNICODE Encoding standard has the following UTF
schemes:
• UTF-8 Encoding: Actually the ASCII encoding
adaptation.
• UTF-8 is capable of encoding all 1,112,064 valid character
code
points.
• UTF-16 Encoding: UTF16 Encoding represents a character's
code points using one of two 16-bits integers.
• UTF-32 Encoding: UTF32 Encoding represents each
code
point as 32-bit integers.
Types of Character
Encoding Techniques
• Base64 Encoding
• Base64 Encoding is used to encode binary data into
equivalent ASCII Characters.
• Common to all binary-to-text encoding schemes, Base64
is designed to carry data stored in binary formats across
channels that only reliably support text content.
• The Base64 encoding is used in the Mail system as mail
systems such as SMTP can't work with binary data
because they accept ASCII textual data only.
• Base64 is also widely used for sending email
attachments.
Image and Audio & Video
Encoding
• Image and audio & video encoding are performed to
save storage space.
• A media file such as image, audio, and video are
encoded to save them in a more efficient and
compressed format.
• These encoded files contain the same content with
usually similar quality, but in compressed size, so that
they can be saved within less space, can be transferred
easily via mail, or can be downloaded on the system.
• For example, a . WAV audio file is converted into .MP3
file to reduce the size by 1/10th to its original size.