Expressions

1
Expressions
 Variables and constants linked with operators
 Arithmetic expressions
 Uses arithmetic operators
 Can evaluate to any value
 Logical expressions
 Uses relational and logical operators
 Evaluates to 1 or 0 (true or false) only
 Assignment expression
 Uses assignment operators
 Evaluates to value depending on assignment

2
Arithmetic Operators
 Binary operators
 Addition: +
 Subtraction: – Examples
 Division: / 2*3 + 5 – 10/3
 Multiplication: *
–1 + 3*25/5 – 7
 Modulus: % distance / time
 Unary operators 3.14* radius * radius
a * x * x + b*x + c
 Plus:+ dividend / divisor
 Minus: –
37 % 10

3
 Contd.
 Suppose x and y are two integer variables,
whose values are 13 and 5 respectively

x+y 18
x–y 8
x*y 65
x/y 2
x%y 3

4
 All operators except % can be used with
operands of all of the data types int, float,
double, char (yes! char also! We will see
what it means later)
 % can be used only with integer operands

5
Operator Precedence
 In decreasing order of priority
1. Parentheses :: ( )
2. Unary minus :: –5
3. Multiplication, Division, and Modulus
4. Addition and Subtraction
 For operators of the same priority, evaluation is
from left to right as they appear
 Parenthesis may be used to change the
precedence of operator evaluation

6
Examples:
Arithmetic expressions

a+b*c–d/e  a + (b * c) – (d / e)
a*–b+d%e–f  a * (– b) + (d % e) – f
a–b+c+d  (((a – b) + c) + d)
x*y*z  ((x * y) * z)
a+b+c*d*e  (a + b) + ((c * d) * e)

7
Type of Value of an Arithmetic
Expression
 If all operands of an operator are integer
(int variables or integer constants), the
value is always integer
 Example: 9/5 will be 1, not 1.8
 Example:
int a=9, b=5;
printf(“%d”, a/b)
will print 1 and not 1.8

8
 If at least one operand is real, the value is real
 Caution: Since floating-point values are rounded to
the number of significant digits permissible, the final
value is an approximation of the final result
 Example: 1/ 3.0 * 3.0 may have the value 0.99999
and not 1.0
 So checking if 1/ 3.0 * 3.0 is equal to 1.0 may
return false!!

9
 The type of the final value of the
expression can be found by applying these
rules again and again as the expression is
evaluated following operator precedence

10
We have a problem!!
int a=10, b=4, c;
float x;
c = a / b;
x = a / b;

The value of c will be 2

The value of x will be 2.0
But we want 2.5 to be stored in x

11
Solution: Typecasting
 Changing the type of a variable during its use
 General form
(type_name) variable_name
 Example

x = ((float) a)/ b;

Now x will store 2.5 (type of a is considered to be

float for this operation only, now it is a mixed-
mode expression, so real values are generated)
12
 Not everything can be typecast to anything
 float/double should not be typecast to int (as
an int cannot store everything a float/double
can store)
 int should not be typecast to char (same
reason)
 General rule: make sure the final type can
store any value of the initial type

13
Example: Finding Average of 2
Integers int a, b;
float avg;
scanf(“%d%d”, &a, &b);
avg = ((float) (a + b))/2;
Wrong program
printf(“%f\n”, avg);

int a, b;
Correct programs
float avg;
scanf(“%d%d”, &a, &b);
int a, b;
avg = (a + b)/2;
float avg;
printf(“%f\n”, avg);
scanf(“%d%d”, &a, &b);
average-1.c avg = (a + b)/2.0;
printf(“%f\n”, avg);
average-2.c 14
Assignment Expression
 Uses the assignment operator (=)
 General syntax:
variable_name = expression
 Left of = is called l-value, must be a modifiable variable
 Right of = is called r-value, can be any expression
 Examples:
velocity = 20
b = 15; temp = 12.5
A = A + 10
v=u+f*t
s = u * t + 0.5 * f * t * t

15
Contd.
 An assignment expression evaluates to a
value same as any other expression
 Value of an assignment expression is the
value assigned to the l-value
 Example: value of
a = 3 is 3
 b = 2*4 – 6 is 2
 n = 2*u + 3*v – w is whatever the arithmetic
expression 2*u + 3*v – w evaluates to given
the current values stored in variables u, v, w
16
Contd.
 Several variables can be assigned the same
value using multiple assignment operators
a = b = c = 5;
flag1 = flag2 = ‘y’;
speed = flow = 0.0;
 Easy to understand if you remember that
 theassignment expression has a value
 Multiple assignment operators are right-to-left
associative

17
Example
 Consider a= b = c = 5
 Three assignment operators
 Rightmost assignment expression is c=5, evaluates
to value 5
 Now you have a = b = 5
 Rightmost assignment expression is b=5, evaluates
to value 5
 Now you have a = 5
 Evaluates to value 5
 So all three variables store 5, the final value the
assignment expression evaluates to is 5
18
Types of l-value and r-value
 Usually should be the same
 If not, the type of the r-value will be internally
converted to the type of the l-value, and then
assigned to it
 Example:
double a;
a = 2*3;
Type of r-value is int and the value is 6
Type of l-value is double, so stores 6.0

19
This can cause strange problems
int a;
a = 2*3.2;
 Type of r-value is float/double and the value is
6.4
 Type of l-value is int, so internally converted to 6
 So a stores 6, not the correct result
 But an int cannot store fractional part anyway
 So just badly written program
 Be careful about the types on both sides

20
More Assignment Operators
 +=, -=, *=, /=, %=
 Operators for special type of assignments
 a += b is the same as a = a + b
 Same for -=, *=, /=, and %=
 Exact same rules apply for multiple
assignment operators

21
Contd.
 Suppose x and y are two integer variables,
whose values are 5 and 10 respectively.

x += y Stores 15 in x
Evaluates to 15
x –= y Stores -5 in x
Evaluates to -5
x *= y Stores 50 in x
Evaluates to 50
x /= y Stores 0 in x
Evaluates to 0
22
Logical Expressions
 Uses relational and logical operators in
addition
 Informally, specifies a condition which can
be true or false
 Evaluates to value 0 or 1
0 implies the condition is false
 1 implies the condition is true

23
Logical Expressions
(count <= 100)
((math+phys+chem)/3 >= 60)
((sex == ’M’) && (age >= 21))
((marks >== 80) && (marks < 90))
((balance > 5000) | | (no_of_trans > 25))
(! (grade == ’A’))

24
Relational Operators
 Used to compare two quantities.

< is less than

> is greater than
<= is less than or equal to
>= is greater than or equal to
== is equal to
!= is not equal to

25
Examples
10 > 20 is false, so value is 0
25 < 35.5 is true, so value is 1
12 > (7 + 5) is false, so value is 0
32 != 21 is true, so value is 1
 When arithmetic expressions are used on either side
of a relational operator, the arithmetic expressions
will be evaluated first and then the results compared
a + b > c – d is the same as (a+b) > (c+d)

26
Logical Operators
 Logical AND (&&)
 Evalutes to 1 if both the operands are non-zero
 Logical OR (||)
 Result is true if at least one of the operands is
non-zero

X Y X && Y X || Y
0 0 0 0
0 non-0 0 non-0
non-0 0 0 non-0
non-0 non-0 non-0 non-0
27
Contd
 Unary negation operator (!)
 Single operand
 Value is 0 if operand is non-zero
 Value is 1 if operand is 0

28
Example
 (4 > 3) && (100 != 200)
4 > 3 is true, so value 1
 100 != 200 is true so value 1
 Both operands 1 for &&, so final value 1
 (!10) && (10 + 20 != 200)
 10 is non-0, so value !10 is 0
 10 + 20 != 200 is true so value 1
 Both operands NOT 1 for &&, so final value 0
 (!10) || (10 + 20 != 200)
 Same as above, but at least one value non-0, so
final value 1
29
 a = 3 && b = 4
 No parenthesis, so need to look at precedence and
associativity
 = has higher precedence than &&
 b=4 is an assignment expression, evaluates to 4
 a = 3 is an assignment expression, evaluates to 3
 Both operands of && are non-0, so final value of the
logical expression is 1
 Note that changing to b = 0 would have made the
final value 0

30
Example: Use of Logical Expressions

void main () {
int i, j;
scanf(“%d%d”,&i,&j);
printf (“%d AND %d = %d, %d OR %d=%d\n”,
i,j,i&&j, i,j, i||j) ;
}

If 3 and 0 are entered from keyboard, output will be

3 AND 0 = 0, 3 OR 0 = 1

31
A Special Operator: AddressOf (&)
 Remember that each variable is stored at a
location with an unique address
 Putting & before a variable name gives the
address of the variable (where it is stored, not
the value)
 Can be put before any variable (with no blank in
between)

int a =10;
printf(“Value of a is %d, and address of a is
%d\n”, a, &a);

32
More on Arithmetic Expressions

33
More Operators: Increment (++)
and Decrement (--)
 Both of these are unary operators; they
operate on a single operand
 The increment operator causes its operand
to be increased by 1
 Example: a++, ++count
 The decrement operator causes its operand
to be decreased by 1.
 Example: i--, --distance

34
Pre-increment versus post-
increment
 Operator written before the operand (++i, --i))
 Calledpre-increment operator (also sometimes called prefix
++ and prefix --)
 Operand will be altered in value before it is utilized in the
program
 Operator written after the operand (i++, i--)
 Called post-increment operator (also sometimes called
postfix ++ and postfix --)
 Operand will be altered in value after it is utilized in the
program

35
Examples
Initial values :: a = 10; b = 20;

x = 50 + ++a; a = 11, x = 61
x = 50 + a++; x = 60, a = 11
x = a++ + --b; b = 19, x = 29, a = 11
x = a++ – ++a; ??

Called side effects (while calculating some values,

something else gets changed)

36
 Operator Class Operators Associativity
Unary postfix++, -- Left to Right
prefix ++, --
Unary Right to Left
─ ! &
Binary * / % Left to Right
Precedence
among different Binary + ─ Left to Right
operators (there
are many other Binary < <= > >= Left to Right
operators in C,
some of which we Binary == != Left to Right
will see later)
Binary && Left to Right
Binary || Left to Right
= += ─ =
Assignment Right to Left
*= /= &=
37
Statements in a C program
 Parts of C program that tell the computer what to do
 Different types
 Declaration statements
 Declares variables etc.

 Assignment statement
 Assignment expression, followed by a ;

 Control statements
 For branching and looping, like if-else, for, while, do-

while (to be seen later)

 Input/Output
 Read/print, like printf/scanf

38
Example
Declaration statement

int a, b, larger;
scanf(“%d %d”, &a, &b);
larger = b;
Control Assignment
if (a > b) statement statement
larger = a; Input/Output
statement
printf(“Larger number is %d\n”, larger);

39
 Compound statements
A sequence of statements enclosed within
{ and }
 Each statement can be an assignment
statement, control statement, input/output
statement, or another compound statement
 We will also call it block of statements
sometimes informally

40
Example
int n;
scanf(“%d”, &n);
while(1) {
if (n > 0) break;
Compound statement
scanf(“%d”, &n);
}

41