ENGINEERING DRAWING

Prof: NGUYEN QUOC HUNG

Contact Information:
Office:Faculty of Engineering Building 3-534(Office hours:
9am to 4pm)
Email: [email protected]
Phone: 0938485812
https://classroom.google.com/c/NDgyOTUwNDUwNzc0?
cjc=kz6mzwc
Learning outcomes:
After having the course, students are expected to:
 Have basic knowledge of technical drawing based
on ISO Standard
 Differentiate the First angle projection and third
angle projection.
 Have understanding the meaning of lines,
tolerance, symbols, surface roughness.
 Visualize the shape and size of an object from
orthographic views and vice versa.
 Visualize the shape and size of an object from
physical model
 Sketch the simple workpiece for production.
 Read and understand the technical drawings
Part 1: Technical Drawing
Class Topics
1 Introduction to Engineering drawing
2 Using drawing tools
3 Orthographic presentation
4 Orthographic writing, reading and convention
5 Pictorial Sketching
6 Section views and convention
7 Working Drawing and Advanced
dimensioning
8 Fits & Tolerances
Part 2: CAD
EVALUATION SCHEME
Technical Drawing (70%):
Exercises 20%
Final Exam 80%
CAD with NX (30%):

Required textbooks:
A Engineering Drawing, M B Shah, Pearson publication,
2007
B Textbook of Engineering Drawing, K V Reddy, BS
Publication, 2nd Edition
 Chapter 1
Introduction to
Engineering Drawing
 TOPICS

Graphics language
Engineering drawing
Projection methods
Orthographic projection
Drawing standards
Traditional Drawing Tools

Lettering
Freehand Sketching
GRAPHICS
LANGUAGE
Effectiveness of Graphics Language
1. Try to write a description of
this object.
2. Test your written description by
having someone attempt to make
a sketch from your description.

You can easily understand that …

The word languages are inadequate for describing the
size,
size shape and features completely as well as
concisely.
Composition of Graphic Language
Graphic language in “engineering application” use
lines to represent the surfaces,
surfaces edges and contours
of objects.

The language is known as “drawing”

drawing or “drafting”
drafting .

A drawing can be done using freehand,

freehand instruments
or computer methods.
Freehand drawing
The lines are sketched without using instruments other
than pencils and erasers.

Example
Instrument drawing
Instruments are used to draw straight lines, circles, and
curves concisely and accurately. Thus, the drawings are
usually made to scale.

Example
Computer drawing
The drawings are usually made by commercial software
such as AutoCAD, solid works etc.

Example
Engineering
Drawing
 Engineering Drawing
• Common language of engineering
• Process of creating drawings for any engineering or
architectural application

• Also known as:

– Drafting
– Engineering drafting
– Mechanical drawing
– Mechanical drafting
– Technical drawing
– Technical drafting
 Elements of Engineering Drawing
Engineering drawing are made up of graphics language
and word language.
language

Graphics
language
Describe a shape
(mainly).

Word
language
Describe size, location and
specification of the object.
 Basic Knowledge for Drafting

Graphics Word
language language

Line Projection Geometric

types method construction Lettering
PROJECTION
METHOD
 PROJECTION METHOD

Perspective Parallel

Oblique Orthographic

Axonometric Multiview
(Isometric)
Isometric, oblique, and perspective drawings
 PROJECTION THEORY

The projection theory is used to graphically represent

3-D objects on 2-D media (paper, computer screen).

The projection theory is based on two variables:

1) Line of sight
2) Plane of projection (image plane or picture plane)
Line of sight is an imaginary ray of light between an
observer’s eye and an object.

There are 2 types of LOS : parallel and converge

Parallel projection Perspective projection

Line of sight
Line of sight
Plane of projection is an imaginary flat plane which
the image is created.

The image is produced by connecting the points where

the LOS pierce the projection plane.

Parallel projection Perspective projection

Plane of projection Plane of projection

 Disadvantage of
Perspective Projection
Perspective projection is not
used by engineer for manu-
facturing of parts, because

1) It is difficult to create.
2) It does not reveal exact
shape and size.
Width is distorted
Orthographic
Projection
 MEANING
Orthographic projection is a parallel projection technique
in which the parallel lines of sight are perpendicular to the
projection plane

Object views from top

1

2
1 5 2 3 4

5
3

Projection plane
 ORTHOGRAPHIC VIEW
Orthographic view depends on relative position of the object
to the line of sight.
Rotate

Two dimensions of an
object is shown. Tilt
More than one view is needed
to represent the object.

Multiview drawing

Three dimensions of an object is shown.

Axonometric drawing
 ORTHOGRAPHIC VIEW
NOTES

Orthographic projection technique can produce either

1. Multiview drawing
that each view show an object in two dimensions.
2. Axonometric drawing
that show all three dimensions of an object in one view.

Both drawing types are used in technical drawing for

communication.
Axonometric (Isometric) Drawing
Advantage Easy to understand

Disadvantage Shape and angle distortion

Example Distortions of shape and size in isometric drawing

Circular hole
becomes ellipse.

Right angle becomes obtuse angle.

 Multiview Drawing
Advantage It represents accurate shape and size.

Disadvantage Require practice in writing and reading.

Example Multiviews drawing (2-view drawing)

Drawing Standard
 Introduction
Standards are set of rules that govern how technical
drawings are represented.

Drawing standards are used so that drawings convey

the same meaning to everyone who reads them.
 Standard Code
Country Code Full name

Vietnam TCVN Tiêu Chuẩn Việt Nam (TCVN8 = ISO128)

USA ANSI American National Standard Institute

Japan JIS Japanese Industrial Standard

UK BS British Standard
Australia AS Australian Standard
Germany DIN Deutsches Institut für Normung

ISO International Standards Organization

Partial List of Drawing Standards
Code number Contents

JIS Z 8311 Sizes and Format of Drawings

JIS Z 8312 Line Conventions
JIS Z 8313 Lettering
JIS Z 8314 Scales
JIS Z 8315 Projection methods
JIS Z 8316 Presentation of Views and Sections
JIS Z 8317 Dimensioning
 Partial List of Drawing Standards
ISO 128 consists of the following parts, under the general
title Technical drawings — General principles of presentation
 Drawing Sheet
A4
Trimmed paper of
a size A0 ~ A4.
A3
Standard sheet size
(JIS) A2

A4 210 x 297
A3 297 x 420 A1
A2 420 x 594
A1 594 x 840
A0 840 x 1188
(Dimensions in millimeters) A0
 Orientation of drawing sheet

1. Type X (A0~A4) 2. Type Y (A4 only)

c
d
d c Drawing
Border Drawing space
space Title block
lines Title block
c

Sheet size c (min) d (min)

A4 10 25
A3 10 25
A2 10 25
A1 20 25
A0 20 25
 TITLE BLOCK
ISO title block arrangement-compact template (ISO7200)

The total width is 180 mm to fit an A4 portrait sheet, with the left margin being 20
mm and the right margin 10 mm. The same title block is used for all paper sizes.
 TITLE BLOCK
ISO title block-(with person name fields)

Its dimension is 180 x 36 mm, contains six optional data fields

 TITLE BLOCK
ISO simplified (recommended)
 Title BLOCK
Title block-Vietnam standard
 Drawing Scales
Length, size
Scale is the ratio of the linear dimension of an element
of an object shown in the drawing to the real linear
dimension of the same element of the object.

Size in drawing Actual size

:
 Drawing Scales
Designation of a scale consists of the word “SCALE”
followed by the indication of its ratio, as follow

SCALE 1:1 for full size

SCALE X:1 for enlargement scales (X > 1)
SCALE 1:X for reduction scales (X > 1)

Dimension numbers shown in the drawing are correspond

to “true size” of the object and they are independent of
the scale used in creating that drawing.
 Basic Line Types
Name according
Types of Lines Appearance
to application

Continuous thick line Visible line

Continuous thin line Dimension line

Extension line
Leader line

Dash thick line Hidden line

Chain thin line Center line

NOTE : We will learn other types of line in later chapters.

 Meaning of Lines
Visible lines represent features that can be seen in the
current view
Hidden lines represent features that can not be seen in
the current view

Center line represents symmetry, path of motion, centers

of circles, axis of axisymmetrical parts

Dimension and Extension lines indicate the sizes and

location of features on a drawing
Example : Line conventions in engineering drawing
 Traditional
Drawing Tools
DRAWING TOOLS
 DRAWING TOOLS

1. T-Square 2. Triangles
 DRAWING TOOLS

2H or HB for thick line

4H for thin line

3. Adhesive Tape 4. Pencils

 DRAWING TOOLS

5. Sandpaper 6. Compass
 DRAWING TOOLS

7. Pencil Eraser 8. Erasing Shield

 DRAWING TOOLS

9. Circle Template 10. Tissue paper

 DRAWING TOOLS

11. Sharpener 12. Clean paper

ABCDEFGHIJKLMNOPQRST
UVWXYZABCDEFGHIJKLM
NOPQRSTUVWXYZABCDEF
Lettering
ABCDEFGHIJKLMNOPQRST
UVWXYZABCDEFGHIJKLM
NOPQRSTUVWXYZABCDEF
 Text on Drawings
Text on engineering drawing is used :

To communicate nongraphic information.

As a substitute for graphic information, in those instance
where text can communicate the needed information
more clearly and quickly.

Thus, it must be written with

Legibility - shape
- space between letters and words

Uniformity - size
- line thickness
Example Placement of the text on drawing
Dimension & Notes

Notes Title Block

 Lettering Standard
ANSI Standard This course

Use a Gothic text style, Use only a vertical Gothic

either inclined or vertical. text style.
Use all capital letters. Use both capital and
lower-case letters.
Use 3 mm for most Same. For letters in title
text height. block it is recommend to use
5~8 mm text height
Space between lines N/A.
of text is at least 1/3 Follows ANSI rule.
of text height.
 Basic Strokes
Straight Slanted Horizontal Curved

Examples : Application of basic stroke

4 5
“I” letter 1 “A” letter 1 2 “B” letter 1

3 6

3
2
 Suggested
Upper-caseStrokes
letters & Sequence
Numerals

Straight line
letters

Curved line
letters

Curved line
letters &
Numerals
Suggested Strokes
Lower-case Sequence
letters

The text’ s body height is about 2/3 the height of a capital

letter.
 Stroke Sequence
I L T F

E H
 Stroke Sequence

V X W
 Stroke Sequence
N M K Z

Y A 4
 Stroke Sequence
O Q C G
 Stroke Sequence
D U P B

R J 1 2
 Stroke Sequence

5 7
 Stroke Sequence
S 0 3 6

8 9
 Stroke Sequence

l i
 Stroke Sequence
v w x k

z
 Stroke Sequence
j y f t

r
 Stroke Sequence
c o a b

d p q e
 Stroke Sequence
g n m h

u s
 Word Composition
Look at the same word having different spacing between letters.
A) Non-uniform spacing

JIRAPONG
B) Uniform spacing

J IR A P O N G
Which one is easier to read ?
 Word Composition

Spacing
JIRAPONG
Contour |||| \ \ | )( )| |(
/
General conclusions are:
Space between the letters depends on the contour of
the letters at an adjacent side.
Good spacing creates approximately equal background
area between letters.
 Space between Letters
1. Straight - Straight 3. Straight - Slant

2. Straight - Curve 4. Curve - Curve

 Space between Letters
5. Curve - Slant 6. Slant - Slant

7. The letter “L” and “T”

≡ slant slant

slant
≡ straight
Example : Good and Poor Lettering

GOOD

Not uniform in style.

Not uniform in height.

Not uniformly vertical or inclined.

Not uniform in thickness of stroke.

Area between letters not uniform.

Area between words not uniform.

 Sentence Composition
Leave the space between words equal to the space
requires for writing a letter “O”.

Example

ALL O DIMENSIONS O ARE OIN

MILLIMETERS O UNLESS
OTHERWISE O SPECIFIED.
Freehand
Sketching
 Straight Line
1. Hold the pencil naturally.

2. Spot the beginning and end points.

3. Swing the pencil back and forth between the points, barely
touching the paper until the direction is clearly established.

4. Draw the line firmly with a free and easy wrist-and-arm

motion
Horizontal line Vertical line
Nearly vertical
inclined line

Nearly horizontal
inclined line
 Small Circle
Method 1 : Starting with a square
1. Lightly sketching the square and marking the mid-points.

2. Draw light diagonals and mark the estimated radius.

3. Draw the circle through the eight points.

Step 1 Step 2 Step 3

 Small Circle
Method 2 : Starting with center line
1. Lightly draw a center line.

2. Add light radial lines and mark the estimated radius.

3. Sketch the full circle.

Step 1 Step 2 Step 3

 Large Circle
1. Place the little finger (or pencil’ s tip) at the center as a
pivot, and set the pencil point at the radius-distance from
the center.
2. Hold the hand in this position and rotate the paper.
 Arc
Method 1 : Starting with a square

Method 2 : Starting with a center line

 Steps in Sketching

1. Block in main shape.

2. Locate the features.

3. Sketch arcs and circles.

4. Sketch lines.
Example