Software Testing

Teresa Abuya
Observations about Testing

 “Testing is the process of executing a

program with the intention of finding
errors.” – Myers
 “Testing can show the presence of bugs
but never their absence.” - Dijkstra
Good Testing Practices

 A good test case is one that has a high

probability of detecting an undiscovered
defect, not one that shows that the
program works correctly
 It is impossible to test your own program
 A necessary part of every test case is a
description of the expected result
Good Testing Practices
(cont’d)
 Avoid nonreproducible or on-the-fly
testing
 Write test cases for valid as well as
invalid input conditions.
 Thoroughly inspect the results of each
test
 As the number of detected defects in a
piece of software increases, the
probability of the existence of more
undetected defects also increases
Good Testing Practices
(cont’d)
 Assign your best people to testing
 Ensure that testability is a key objective
in your software design
 Never alter the program to make testing
easier
 Testing, like almost every other activity,
must start with objectives
Levels of Testing

 Unit Testing
 Integration Testing
 Validation Testing
 Regression Testing
 Alpha Testing
 Beta Testing
 Acceptance Testing
Unit Testing

 Algorithms and logic

 Data structures (global and local)
 Interfaces
 Independent paths
 Boundary conditions
 Error handling
Why Integration Testing Is
Necessary
 One module can have an adverse effect
on another
 Subfunctions, when combined, may not
produce the desired major function
 Individually acceptable imprecision in
calculations may be magnified to
unacceptable levels
Why Integration Testing Is
Necessary (cont’d)
 Interfacing errors not detected in unit
testing may appear
 Timing problems (in real-time systems)
are not detectable by unit testing
 Resource contention problems are not
detectable by unit testing
Top-Down Integration

1. The main control module is used as a

driver, and stubs are substituted for all
modules directly subordinate to the
main module.
2. Depending on the integration approach
selected (depth or breadth first),
subordinate stubs are replaced by
modules one at a time.
Top-Down Integration (cont’d)

3. Tests are run as each individual

module is integrated.
4. On the successful completion of a set
of tests, another stub is replaced with a
real module
5. Regression testing is performed to
ensure that errors have not developed
as result of integrating new modules
Problems with Top-Down
Integration
 Many times, calculations are performed in the
modules at the bottom of the hierarchy
 Stubs typically do not pass data up to the
higher modules
 Delaying testing until lower-level modules are
ready usually results in integrating many
modules at the same time rather than one at a
time
 Developing stubs that can pass data up is
almost as much work as developing the actual
module
Bottom-Up Integration
 Integration begins with the lowest-level
modules, which are combined into clusters, or
builds, that perform a specific software
subfunction
 Drivers (control programs developed as stubs)
are written to coordinate test case input and
output
 The cluster is tested
 Drivers are removed and clusters are combined
moving upward in the program structure
Problems with Bottom-Up
Integration
 The whole program does not exist until
the last module is integrated
 Timing and resource contention
problems are not found until late in the
process
Validation Testing
 Determine if the software meets all of the
requirements defined in the SRS
 Having written requirements is essential
 Regression testing is performed to determine if
the software still meets all of its requirements in
light of changes and modifications to the
software
 Regression testing involves selectively
repeating existing validation tests, not
developing new tests
Alpha and Beta Testing

 It’s best to provide customers with an

outline of the things that you would like
them to focus on and specific test
scenarios for them to execute.
 Provide with customers who are actively
involved with a commitment to fix defects
that they discover.
Acceptance Testing

 Similar to validation testing except that

customers are present or directly
involved.
 Usually the tests are developed by the
customer
Test Methods

 White box or glass box testing

 Black box testing
 Top-down and bottom-up for performing
incremental integration
 ALAC (Act-like-a-customer)
Test Types
 Functional tests
 Algorithmic tests
 Positive tests
 Negative tests
 Usability tests
 Boundary tests
 Startup/shutdown tests
 Platform tests
 Load/stress tests
 Concurrent Development/
Validation Testing Model
 Conduct informal validation while development is still
going on
 Provides an opportunity for validation tests to be
developed and debugged early in the software
development process
 Provides early feedback to software engineers
 Results in formal validation being less eventful, since
most of the problems have already been found and
fixed
Validation Readiness Review

 During informal validation developers

can make any changes needed in order
to comply with the SRS.
 During informal validation QA runs tests
and makes changes as necessary in
order for tests to comply with the SRS.
Validation Readiness Review
(cont’d)
 During formal validation the only
changes that can be made are bug fixes
in response to bugs reported during
formal validation testing. No new
features can be added at this time.
 During formal validation the same set of
tests run during informal validation is run
again. No new tests are added.
 Entrance Criteria for Formal
Validation Testing
 Software development is completed (a
precise definition of “completed” is required.
 The test plan has been reviewed, approved
and is under document control.
 A requirements inspection has been
performed on the SRS.
 Design inspections have been performed on
the SDDs (Software Design Descriptions).
 Entrance Criteria for Formal
Validation Testing (cont’d)
 Code inspections have been performed on all
“critical modules”.
 All test scripts are completed and the
software validation test procedure document
has been reviewed, approved, and placed
under document control.
 Selected test scripts have been reviewed,
approved and placed under document
control.
 Entrance Criteria for Formal
Validation Testing (cont’d)
 All test scripts have been executed at least
once.
 CM tools are in place and all source code is
under configuration control.
 Software problem reporting procedures are in
place.
 Validation testing completion criteria have
been developed, reviewed, and approved.
 Formal Validation

 The same tests that were run during informal

validation are executed again and the results
recorded.
 Software Problem Reports (SPRs) are
submitted for each test that fails.
 SPR tracking is performed and includes the
status of all SPRs ( i.e., open, fixed, verified,
deferred, not a bug)
 Formal Validation (cont’d)

 For each bug fixed, the SPR identifies the

modules that were changed to fix the bug.
 Baseline change assessment is used to ensure
only modules that should have changed have
changed and no new features have slipped in.
 Informal code reviews are selectively conducted
on changed modules to ensure that new bugs
are not being introduced.
 Formal Validation (cont’d)
 Time required to find and fix bugs (find-fix
cycle time) is tracked.
 Regression testing is performed using the
following guidelines:
 Use complexity measures to help determine
which modules may need additional testing
 Use judgment to decide which tests to be rerun
 Base decision on knowledge of software design
and past history
 Formal Validation (cont’d)

 Track test status (i.e., passed, failed, or not

run).
 Record cumulative test time (cumulative
hours of actual testing) for software reliability
growth tracking.
 Exit Criteria for Validation
Testing
 All test scripts have been executed.
 All SPRs have been satisfactorily resolved.
(Resolution could include bugs being fixed,
deferred to a later release, determined not to
be bugs, etc.) All parties must agree to the
resolution. This criterion could be further
defined to state that all high-priority bugs
must be fixed while lower-priority bugs can be
handled on a case-by-case basis.
 Exit Criteria for Validation
Testing (cont’d)
 All changes made as a result of SPRs have
been tested.
 All documentation associated with the
software (such as SRS, SDD, test
documents) have been updated to reflect
changes made during validation testing.
 The test report has been reviewed and
approved.
Test Planning

 The Test Plan – defines the scope of the

work to be performed
 The Test Procedure – a container
document that holds all of the individual
tests (test scripts) that are to be
executed
 The Test Report – documents what
occurred when the test scripts were run
 Test Plan
 Questions to be answered:
 How many tests are needed?
 How long will it take to develop those tests?
 How long will it take to execute those tests?
 Topics to be addressed:
 Test estimation
 Test development and informal validation
 Validation readiness review and formal validation
 Test completion criteria
 Test Estimation

 Number of test cases required is based on:

 Testing all functions and features in the SRS
 Including an appropriate number of ALAC (Act
Like A Customer) tests including:
 Do it wrong
 Use wrong or illegal combination of inputs
 Don’t do enough
 Do nothing
 Do too much

 Achieving some test coverage goal

 Achieving a software reliability goal
 Considerations in
Test Estimation
 Test Complexity – It is better to have many
small tests that a few large ones.
 Different Platforms – Does testing need to be
modified for different platforms, operating
systems, etc.
 Automated or Manual Tests – Will automated
tests be developed? Automated tests take more
time to create but do not require human
intervention to run.
 Estimating Tests Required
SRS Estimated Notes
Reference Number of
Tests
Required
4.1.1 3 2 positive and 1 negative test
4.1.2 2 2 automated tests
4.1.3 4 4 manual tests
4.1.4 5 1 boundary condition, 2 error
conditions, 2 usability tests
…
Total 165
Estimated Test Development
Time
Estimated Number of Tests: 165
Average Test Development Time: 3.5
(person-hours/test)
Estimated Test Development Time:
577.5
(person-hours)
Estimated Test Execution Time
Estimated Number of Tests: 165
Average Test Execution Time: 1.5
(person-hours/test)
Estimated Test Execution Time: 247.5
(person-hours)
Estimated Regression Testing (50%): 123.75
(person-hours)
Total Estimated Test Execution Time: 371.25
(person-hours)
Test Procedure

 Collection of test scripts

 An integral part of each test script is the
expected results
 The Test Procedure document should
contain an unexecuted, clean copy of
every test so that the tests may be more
easily reused
 Test Report

 Completed copy of each test script with evidence

that it was executed (i.e., dated with the
signature of the person who ran the test)
 Copy of each SPR showing resolution
 List of open or unresolved SPRs
 Identification of SPRs found in each baseline
along with total number of SPRs in each baseline
 Regression tests executed for each software
baseline
Validation Test Plan
IEEE – Standard 1012-1998
1. Overview
a. Organization
b. Tasks and Schedules
c. Responsibilities
d. Tools, Techniques, Methods
2. Processes
a. Management
b. Acquisition
c. Supply
d. Development
e. Operation
f. Maintenance
Validation Test Plan
IEEE – Standard 1012-1998 (cont’d)

3. Reporting Requirements
4. Administrative Requirements
5. Documentation Requirements
6. Resource Requirements
7. Completion Criteria