Scribd
Upload
28 views29 pages

CAA & CAD Assignment

The document outlines an assignment involving the creation of 3-D models and their assembly using two software programs: CATIA V5 and CREO Parametric. It details the step-by-step process for designing a universal coupling assembly in both software environments. The assignment includes specific instructions for sketching, extruding, and assembling the parts to complete the project.

Uploaded by

kurhekarparimal01
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
28 views29 pages

CAA & CAD Assignment

The document outlines an assignment involving the creation of 3-D models and their assembly using two software programs: CATIA V5 and CREO Parametric. It details the step-by-step process for designing a universal coupling assembly in both software environments. The assignment includes specific instructions for sketching, extruding, and assembling the parts to complete the project.

Uploaded by

kurhekarparimal01
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
You are on page 1/ 29

Computer aided analysis &

Design - Assignment - 01
BITS Pilani
Pilani | Dubai | Goa | Hyderabad
Submitted by - PARIMAL VISHWAS KURHEKAR
[email protected]
Creating 3-D model and making assembly
in 2 different software
Summery

• We will be creating 2 different 3-D model in 2 different software and making assembly
of it as a part of assignment 1.
• Software we are going to use are:-
1. CATIA V5
2. CREO Parametric

• First of all we will make 2, 3-D models and then assemble them.
• We are making universal coupling assembly
• Open CATIA V5
• Go to Start – Mechanical Design – Part Design
• Select YZ plane and edit
• Draw the following sketch
• It should be fully constrained as follows.
• Exit sketch and click on PAD.
• After clicking on pad select following options.
• Click on thick profile set thickness to 10 mm.
• Click on mirror extent.
• Click ok 3-D model will be created.
• Now click on XY plane and go to edit.
• Now create a circle of 25 mm diameter.
• Exit sketcher click on pad Length = 65 mm and click Ok.
• Now select 4 edges and give fillet click ok.
• Select 2 edges and click ok
• Click on side face and edit.
• Draw sketch as above.
• And exit sketcher.
• Click on Pocket and select up to last it will create pocket in it.
• Draw sketch in new part and pad by 100 mm.
• Now draw circle on side face of 35 mm diameter and pad by 5 mm.
• Now create same profile on XY plane and pad.

Now the profile will look like this.


• Now click on Start – Part design – assembly design.
• Now drag drop all parts in assembly.
• Now the final assembly will look like this.
Creo
Click to edit Session title
1. Open Creo Parametric
2. Click on New – Part Design -- Ok
• Select an axis and click on
sketch
• Now draw same sketch and extrude.
• Click on solid – now give depth as 50mm –now we will give thickness to 10mm and click on Ok
• Give round to these 4 edges of 25 mm and click OK.
• Select highlighted edge and give round og 5 mm.
• Now click on selected surface and click on sketch.
• Draw following sketch.
• Click on Extrude – Remove material -- Ok
• Now click on bottom side of profile and click on sketch where we will draw one cylindrical sketch.
• Excrude sketch t 65 mm
• Draw sketch in new part and pad by 100 mm.
• Now draw circle on side face of 35 mm diameter and pad by 5 mm.
• Do the same on other plane too and extrude by 100 mm.
• Click on File – New – Assembly -- Ok
• Now click on assembly – and select models which you want to assemble.
• Now assemble the parts into assembly and it will look like following.
THANK YOU

You might also like