Parametric Equations
10 and Polar Coordinates
Copyright © Cengage Learning. All rights reserved.
10.2 Calculus with Parametric Curves
Copyright © Cengage Learning. All rights reserved.
Tangents
3
Tangents
Suppose f and g are differentiable functions and we want to
find the tangent line at a point on the curve where y is also
a differentiable function of x.
Then the Chain Rule gives
4
Tangents
If dx/dt 0, we can solve for dy/dx:
Equation 1 (which you can remember by thinking of
canceling the dt’s) enables us to find the slope dy/dx of the
tangent to a parametric curve without having to eliminate
the parameter t.
5
Tangents
We see from that the curve has a horizontal tangent
when dy/dt = 0 (provided that dx/dt 0) and it has a
vertical tangent when dx/dt = 0 (provided that dy/dt 0).
This information is useful for sketching parametric curves.
It is also useful to consider d 2y/dx2. This can be found by
replacing y by dy/dx in Equation 1:
6
Example 1
A curve C is defined by the parametric equations x = t2,
y = t 3 – 3t.
(a) Show that C has two tangents at the point (3, 0) and
find their equations.
(b) Find the points on C where the tangent is horizontal or
vertical.
(c) Determine where the curve is concave upward or
downward.
(d) Sketch the curve.
7
Example 1 – Solution
(a) Notice that y = t 3 – 3t = t(t2 – 3) = 0 when t = 0 or t =
Therefore the point (3, 0) on C arises from two values of
the parameter, t = and t = .
This indicates that C crosses itself at (3, 0).
8
Example 1 – Solution cont’d
Since
the slope of the tangent when t = is
dy/dx , so the equations of the
tangents at (3, 0) are
9
Example 1 – Solution cont’d
(b) C has a horizontal tangent when dy/dx = 0, that is, when
dy/dt = 0 and dx/dt ≠ 0. Since dy/dt = 3t2 – 3, this
happens when t2 = 1, that is, t = 1.
The corresponding points on C are (1, –2) and (1, 2).
C has a vertical tangent when dx/dt = 2t = 0, that is,
t = 0. (Note that dy/dt ≠ 0 there.)
The corresponding point on C is (0, 0).
10
Example 1 – Solution cont’d
(c) To determine concavity we calculate the second
derivative:
Thus the curve is concave upward when t > 0 and concave
downward when t < 0.
11
Example 1 – Solution cont’d
(d) Using the information from parts (b) and (c), we sketch
C in Figure 1.
Figure 1
12
Areas
13
Areas
We know that the area under a curve y = F (x) from a to b is
A = F (x) dx, where F (x) 0.
If the curve is traced out once by the parametric equations
x = f (t) and y = g (t), t , then we can calculate an
area formula by using the Substitution Rule for Definite
Integrals as follows:
14
Example 3
Find the area under one arch of the cycloid
x = r( – sin ) y = r(1 – cos )
(See Figure 3.)
Figure 3
15
Example 3 – Solution
One arch of the cycloid is given by 0 2.
Using the Substitution Rule with y = r(1 – cos ) and
dx = r(1 – cos )d, we have
16
Example 3 – Solution cont’d
17
Arc Length
18
Arc Length
We already know how to find the length L of a curve C
given in the form y = F (x), a x b.
If F is continuous, then
Suppose that C can also be described by the parametric
equations x = f (t) and y = g (t), t , where
dx/dt = f (t) > 0.
19
Arc Length
This means that C is traversed once, from left to right, as t
increases from to and f () = a, f () = b.
Putting Formula 1 into Formula 2 and using the Substitution
Rule, we obtain
Since dx/dt > 0, we have
20
Arc Length
Even if C can’t be expressed in the form y = F (x), Formula
3 is still valid but we obtain it by polygonal approximations.
We divide the parameter interval [, ] into n subintervals
of equal width t.
If t0, t1, t2, . . . , tn are the endpoints of these subintervals,
then xi = f (ti) and yi = g (ti) are the coordinates of points
Pi(xi, yi) that lie on C and the polygon with vertices
P0, P1, . . . , Pn approximates C.
21
Arc Length
(See Figure 4.)
Figure 4
We define the length L of C to be the limit of the lengths of
these approximating polygons as n :
22
Arc Length
The Mean Value Theorem, when applied to f on the interval
[ti –1, ti], gives a number in (ti –1, ti) such that
f(ti) – f (ti –1) = f ( ) (ti – ti –1)
If we let xi = xi – xi –1 and yi = yi – yi –1, this equation
becomes
xi = f ( ) t
Similarly, when applied to g, the Mean Value Theorem
gives a number in (ti –1, ti) such that
yi = g ( ) t 23
Arc Length
Therefore
and so
24
Arc Length
The sum in resembles a Riemann sum for the function
but it is not exactly a Riemann sum
because ≠ in general.
Nevertheless, if f and g are continuous, it can be shown
that the limit in is the same as if and were equal,
namely,
25
Arc Length
Thus, using Leibniz notation, we have the following result,
which has the same form as Formula 3.
Notice that the formula in Theorem 5 is consistent with the
general formulas L = ds and (ds)2 = (dx)2 + (dy)2.
26
Arc Length
Notice that the integral gives twice the arc length of the
circle because as t increases from 0 to 2, the point
(sin 2t, cos 2t) traverses the circle twice.
In general, when finding the length of a curve C from a
parametric representation, we have to be careful to ensure
that C is traversed only once as t increases from to .
27
Example 5
Find the length of one arch of the cycloid x = r( – sin ),
y = r(1 – cos ).
Solution:
From Example 3 we see that one arch is described by the
parameter interval 0 2.
Since
and
28
Example 5 – Solution cont’d
We have
29
Example 5 – Solution cont’d
To evaluate this integral we use the identity
sin2x = (1 – cos 2x) with = 2x, which gives
1 – cos = 2 sin2(/2).
Since 0 2, we have 0 /2 and so sin(/2)
0.
Therefore
30
Example 5 – Solution cont’d
so
31
Surface Area
32
Surface Area
If the curve given by the parametric equations x = f (t),
y = g (t), t , is rotated about the x-axis, where f , g
are continuous and g (t) 0, then the area of the resulting
surface is given by
The general symbolic formulas S = 2 y ds and
S = 2 x ds are still valid, but for parametric curves we
use
33
Example 6
Show that the surface area of a sphere of radius r is 4 r2.
Solution:
The sphere is obtained by rotating the semicircle
x = r cos t y = r sin t 0t
about the x-axis.
Therefore, from Formula 6, we get
34
Example 6 – Solution cont’d
35
