Scribd
Upload
3 views8 pages

Mid Term

The document outlines a subnetting plan for a network with the IP address 192.168.1.0/24, dividing it into six subnets for different departments to enhance security and improve routing efficiency. Each subnet is designed to accommodate the specific number of devices required by each department, with a maximum of 30 devices per subnet. Future considerations include the potential to upgrade device capacity and utilize the additional available subnets.

Uploaded by

Jimmy Ardiansyah
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
3 views8 pages

Mid Term

The document outlines a subnetting plan for a network with the IP address 192.168.1.0/24, dividing it into six subnets for different departments to enhance security and improve routing efficiency. Each subnet is designed to accommodate the specific number of devices required by each department, with a maximum of 30 devices per subnet. Future considerations include the potential to upgrade device capacity and utilize the additional available subnets.

Uploaded by

Jimmy Ardiansyah
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
You are on page 1/ 8

Subnetting Plan

Joshua Porter October 16


Subnetting and why we use it

 Subnetting can take a large network and split it into different and
smaller networks so we can have better security, and the other
reason is so we can use the subnet information to develop the best
route between networks. Meaning faster connection.

 Think of it like a mailman and the city he's in. One person might be in
a bigger city with more addresses to go to, while the other person in
the smaller city has an easier path.
My assignment – 192.168.1.0/24

Network -24 bits Host-8 bits


11111111 11111111 11111111 0000000
. . .

 Ip Address is 192.168.1.0
 Class C
 Subnet mask 255.255.255.0
 Broadcast Address 192.168.1.255

All this said the current address range is : 192.168.1.0-192.168.1.255

The goal is to divide these devices for each department into different
subnets.
My Walk-Through Process

 So, we have 6 different departments, so we need 6 different subnets.


 So, if we were to borrow 3 bits from our last host the CIDR would
be /27 and we’d have 8 subnets. Or 2^3.
 Then after we’d also take 2^5 for the amount hosts left which gives
us our block size of 32, but you can forget to subtract the network
and broadcast address so technically 30.
 This all above is perfect because the most devices we have to put
into a subnet is 20.
Table to show the subnets and
Where every department is.
Subnet Departments Start Address End Address Network Broadcast
Address Address
192.168.1.0/27 Medical Staff- 192.168.1.1 192.168.1.30 192.168.1.0 192.168.1.31
20
192.168.1.32/2 Laboratory- 15 192.168.1.33 192.168.1.62 192.168.1.32 192.168.1.63
7

192.168.1.64/2 Reception- 10 192.168.1.65 192.168.1.94 192.168.1.64 192.168.1.95


7

192.168.1.96/2 Administrative 192.168.1.97 192.168.1.126 192.168.1.96 192.168.1.127


7 Staff-
8

192.168.1.128/ Telehealth 192.168.1.129 192.168.1.158 192.168.1.128 192.168.1.159


27 Services-
5

192.168.1.160/ Billing 192.168.1.161 192.168.1.190 192.168.1.160 192.168.1.191


27 Department-
5
192.168.1.192/ None Yet 192.168.1.193 192.168.1.222 192.168.1.192 192.168.1.223
27
192.168.1.224/ None Yet 192.168.1.225 192.168.1.254 192.168.1.224 192.168.1.255
What do we have now?

Network 24 bits S= Host-5


3 bits
11111111 11111111 11111111 11100000
. . .
S= subnet bits
Future Ideas

 Well at the current each department can hold 30 devices so you can
upgrade that side of things for one.
 Also, there are two extra subnets for 30 more devices.

You might also like