Scribd
Upload
8 views14 pages

Iot Lab MST

The document outlines a project for a smoke detection system using the MQ-2 gas sensor, which detects smoke and various flammable gases. It describes the functionality of the sensor, including how it activates a buzzer and LED indicators based on smoke levels, and lists the required components for the setup. Additionally, it emphasizes the importance of smoke alarms for safety and provides credits to the group members involved in the project.

Uploaded by

Tushar Yadav
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
8 views14 pages

Iot Lab MST

The document outlines a project for a smoke detection system using the MQ-2 gas sensor, which detects smoke and various flammable gases. It describes the functionality of the sensor, including how it activates a buzzer and LED indicators based on smoke levels, and lists the required components for the setup. Additionally, it emphasizes the importance of smoke alarms for safety and provides credits to the group members involved in the project.

Uploaded by

Tushar Yadav
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
You are on page 1/ 14

1

Have Patience..
The presentors are�bit
lazy! �
Smoke Detection Using
MQ-2 Gas sensor
Your personalized
SMOKE DETECTOR
3

Inspiration
4

OVERVIEW
 In this example, you will read the
sensor analog output voltage and
when the smoke reaches a certain
level, it will make sound a buzzer
and a red LED will turn on.

 When the output voltage is below


that level, a green LED will be on.
5

MQ-2 GAS SENSOR


 The MQ-2 smoke sensor is sensitive to
smoke and to the following flammable
gases:
 LPG
 Butane
 Propane
 Methane
 Alcohol
 Hydrogen
 The resistance of the sensor is different
depending on the type of the gas.
 The smoke sensor has a built-in
6
potentiometer that allows you to adjust the
sensor sensitivity according to how
accurate you want to detect gas.

The greater the gas concentration , the


greater
the output voltage.

The lower the gas concentration , the lower


the output voltage
7

REQUIREMENTS
 Arduino uno
 Breadboard
 MQ-2 smoke detector
 Jumper wires
 LED
 Buzzer
 Resistor 221 ohm
Key Features AND 8

SIGNIFICANCE
24/7
Monitoring

Smoke alarms
are inexpensive Smoke alarms
provide life-
saving warnings
Low to allow you to
get out of the
Maintenan house before you
ce are trapped by
fire or smoke
9

Hello!
�
�
I am Tushar

10

! Yay
🎃
I am Kanav.
! 11

🌏 I am Deepak
12

I am Amandeep
13

Credits
Special thanks to all the people who have helped to
make this project a reality.

Group Members:
✖ Tushar
✖ Kanav
✖ Deepak
✖ Amandeep
14

Thanks!
Any questions?

You might also like