Chapter # 23
Chapter # 23
Gauss’ Law
CONTENTS
Electric flux
Dependence of flux on angle between E and A
Direction of Area
Flux through a closed surface
Gauss’ Law
Problems
Uses and Application of Gauss Law
Electric field due to two sheets
A charged Isolated Conductor
Problems
Electric flux
Electric flux is the measure of the electric field
passing through a given area. Mathematically it can
be written as
In case of closed
surface, area of each
part is directed along
the outward normal
Flux through a Closed Surface
Flux can also be written as , and from the figure, angle between area of the gaussian surface and electric field passing
through it is , therefore
Since all the charge is enclosed inside the gaussian surface, therefore, =Q
In above equation A is the area of the gaussian surface which can be written as therefore
Flux can also be written as , and from the figure, angle between area of the gaussian surface and electric field passing
through it is , therefore
This equation shows that the product of these three quantities is equal to zero but from figure, area of the gaussian
surface is not equal to zero . Moreover, , therefore,
This result shows that the electric field inside a charged shell is equal to zero.
Question 2: Consider a sphere of radius R, which contains a positive
charge Q uniformly distributed throughout its volume. Derive the
expression for the electric field at distance r from its center. Both inside
and outside the sphere.
Outside the sphere
Consider a gaussian surface in the shape of a shell of radius r, such that the point at which we must find electric field lies
on its surface (shell in the figure). In this case gaussian surface is larger than the given charged sphere. From Gauss’ law,
the net flux through the gaussian surface can be written as
Flux can also be written as , and from the figure, angle between area of the gaussian surface and electric field passing
through it is , therefore
Since all the charge is enclosed inside the gaussian surface, therefore, =Q
In above equation A is the area of the gaussian surface which can be written as therefore
Flux can also be written as , and from the figure, angle between area of the gaussian surface and electric field passing through it is ,
therefore
Can be found using the ratios of charges and volumes of the gaussian surface and the given charged shell. Ratio of charges will be equal
to the ratio of volumes, that is
Putting the value of charge enclosed and the area of the gaussian surface (),
and after rearranging, the electric field becomes,
Question 3: Find the expression for
the electric field at distance from an 𝑄
=𝜆
+
h +
infinitely long line of positive charge +
with linear charge density +
+
+
+
+
+
h + 𝑟
+
+
+
+
+
+
+
Let's consider a gaussian surface in the shape of a cylinder with height and radius such that
the point at which we must find electric field lies on the curved surface of the cylinder. From
Gauss’ law, we can write the total flux through the cylinder as
If , , is the flux through bottom, curved and top phase of the cylinder respectively, then we
can write above equation as
Flux can also be written as , and from the figure, the angle between area and electric field
for the top and bottom phase is and for the curved phase therefore the above equation
becomes
Since the line has a linear charge density , if we multiply charge density with a length, we
will get the charge contained in that length of the line, therefore, we can write
The area A in above equation is the area of the curved phase of the cylinder and can be
written as the product of the circumference and height of the cylinder that is
𝑄
𝜎=
𝐴
Let's consider a gaussian surface in the shape of a cylinder with area of each flat phase equal to A. The sheet
passes through the middle of the curved phase and the point at which we must find the electric field lies on one
flat phase of the cylinder. From Gauss’ law, we can write the total flux through the cylinder as
If , , is the flux through the three phases of the cylinder, then we can write above equation as
Flux can also be written as , and from the figure, the angle between area and electric field for the flat phases is
and for the curved phase therefore the above equation becomes
Since the sheet has a surface charge density , if we multiply charge density with an area , we will get the charge
contained in that area, therefore, we can write
For region - 2
- +
- +
- +
And for region -3
- +
- +
- +
- +
- +
- +
- 𝝈 +
𝝈 +
Practice Problems of Chapter 23
• 1, 4, 5, 14, 20, 21, 24, 25, 28, 36, 49, 52
−𝑏 ± √ 𝑏2 − 4 𝑎𝑐
2𝑎
An isolated conducting shell of inner radius and outer radius has
a net charge of . A point charge of magnitude is placed at the
center. What is the charge on the
(a) Inner surface
(b) Outer surface.
What is the electric field at
(c)
(d)
(e)
An isolated conducting shell of inner radius and outer radius has a net charge
of
A point charge of magnitude is placed at the center. What is the charge on the,
(a) Inner surface
(b) Outer surface.
What is the electric field at
(c)
(d)
(e)