Amanullah Finalized Progress
Amanullah Finalized Progress
• Introduction
• Problem Statement
• Objectives
• Methodology
• Work Schedule
• References
https://agencevu.com/en/serie/after-the-earthquake-in-balakot-pakistan-2005
Real earth quake practices over the world show that local ground strata has a tremendous effect
on wave parameters .
As these earthquake wave travel from bed rock to the surface of the soil.
.
Now different attenuation equation are developed which can indicate this amplification.
To check the accuracy of such equation and software and to obtain practical data different
earthquake measuring instrument are installed in vertical direction at different depth.
This vertical arrangement of seismic instrument are called Seismic vertical Array.
Actual
Numerical Comparison of
observation
Data Analysis Modelling actual site data
Deep soil and numerical
using geo das
software modeling
software
NUMERICAL MODELING IN
DEEPSOIL SOFTWARE
ANALYSIS
COMPARISION OF RESULTS
AND RECOMMENDATIONS
01/04/2025 Department of Civil Engineering, UET Peshawar 13
Problem Facing To Us
N o w t h i s s y s t e m i s i n i n - o p e r a ti o n f o r m .
O u r fi r s t j o b i s t o m a k e t h e s y s t e m i n
O p e r a ti n g f o r m .
January 4, 2025 15
Department of Civil Engineering, UET Peshawar
Problem Facing To Us
Connection But No Result To Solve The Problem
January 4, 2025 16
Department of Civil Engineering, UET Peshawar
METHODOLOGY
1.Data acquisition and
collection:
i. Configuration:
Open any terminal program and
chose the appropriate COM
port. Baud rate is 115200
preferably UCON will work.
Figure 1: configuration
01/04/2025 Department of Civil Engineering, UET Peshawar 17
METHODOLOGY
1.Data acquisition and collection:
i i.Data collection:
Alternatively, open GeoDAS, go to Tools > Terminal… and chose the COM Port. As Baud rate select
115200. Then Press Connect.
Figure 3: ground acceleration motion time history at 60m and 25m depth
01/04/2025 Department of Civil Engineering, UET Peshawar 19
METHODOLOGY
2. Data analysis:
i. Ground acceleration motion time history:
This graph display shows seismic ground acceleration time history recorded during a seismic event at
8/14/2015 at the surface . It shows waveforms from three channels, with peak ground accelerations.