Navigating The Case Analysis

Download as ppt, pdf, or txt
Download as ppt, pdf, or txt
You are on page 1of 21

Navigating the Case Analysis Process for Strategic Management

MENG3001 Lecture 1 24/01/2012 Dr. Terrence R.M.Lalla

Overview of Document
This slide deck is designed to guide students through the process of analyzing a case study for a general management or strategic management course It is a step-by-step process, The material is organized into 5 phases and each is supported by a suggested approach, tips.

Objectives of Case Analysis


Application of theoretical concepts Development of managerial skills Use of disciplined problem-solving process Team discussions afford multiple context and perspective opportunities Deal with ambiguity

Source: HBS Note An Introduction to Cases (Shapiro, 1984)

Model for Effective Case Analysis


Case Analysis Process
1. Framing 2. Labeling 3. Summarizing 4. Synthesizing 5. Concluding

What are the objectives? Identify the key question Flip through the case Skim read the case Carefully read the beginning and end

What are the facts? Label the facts in the margins of the case: General (GEN) Industry (IND) Competition (COM) Strength (STR) Weakness (WEA)

What is important? Summarize the facts Eliminate unimportant Eliminate redundant Mark most important

What are the options? State the 1-3 key questions Identify options (MECE) State decision criteria Summarize pros/cons

What is the answer? Take a position Identify the few key supporting facts Discuss implementation Mention risks

The key to good case analysis is to break down the case facts into a clear, understandable and useful form

Model for Effective Case Analysis


Case Analysis Process
1. Framing 2. Labeling 3. Summarizing 4. Synthesizing 5. Concluding

What are the objectives? Identify the key question Flip through the case Skim read the case Carefully read the beginning and end

What are the facts? Label the facts in the margins of the case: General (GEN) Industry (IND) Competition (COM) Strength (STR) Weakness (WEA)

What is important? Summarize the facts Eliminate unimportant Eliminate redundant Mark most important

What are the options? State the 1-3 key questions Identify options (MECE) State decision criteria Summarize pros/cons

What is the answer? Take a position Identify the few key supporting facts Discuss implementation Mention risks

The key to good case analysis is to break down the case facts into a clear, understandable and useful form

Phase 1 Framing
Key Question: What are the objectives?
STEPS
Identify the key question (what is the assignment, discussion questions, and purpose of this case study) Flip through the case (in less than 5 minutes, look at the big picture of the case and the overall components)

TIPS
Pay attention to what Dr. Lalla says as the case is introduced Understand the context of the case in terms of material from the textbook This is literally intended to give you a look at the overall contents of the case Conclude as to the general nature of the case quantitative/qualitative, technical/general, long/short, etc. Dont bother marking up the case at this point Focus on getting the gist of the paragraphs without reading every word (find the 1-2 primary sentences and understand how other sentences support them) Some of the most important information about the framing of the case comes in the beginning and end Realize that every story has a situation, complication and resolution (try to find the key

Skim read the case (in less than 15 minutes read the intro and end of each paragraph and skim all exhibits)

Carefully read the beginning and end (every case has an important intro section and ending section)

Case Template - Framing


Key Question: Flipping and Skimming:

Beginning of Case:

Ending of Case:

Note: Answer key is at the end of this deck; please attempt to fill in the template before looking at possible answers

Model for Effective Case Analysis


Case Analysis Process
1. Framing 2. Labeling 3. Summarizing 4. Synthesizing 5. Concluding

What are the objectives? Identify the key question Flip through the case Skim read the case Carefully read the beginning and end

What are the facts? Label the facts in the margins of the case: General (GEN) Industry (IND) Competition (COM) Strength (STR) Weakness (WEA)

What is important? Summarize the facts Eliminate unimportant Eliminate redundant Mark most important

What are the options? State the 1-3 key questions Identify options (MECE) State decision criteria Summarize pros/cons

What is the answer? Take a position Identify the few key supporting facts Discuss implementation Mention risks

The key to good case analysis is to break down the case facts into a clear, understandable and useful form

Phase 2 Labeling
Key Question: What are the facts?
STEPS
Label the facts in the margins of the case (using the nomenclature below, label the facts in the case ) General GEN (general issues include the macro environment beyond the industry as well as customers and overall trends)

TIPS
Use abbreviations as indicated Underline the key sentence in the paragraph Review a checklist of the types of issues beforehand Remember that this is not company or industry specific examples are social, economic, ecological, technical, and political issues (STEEP) Examples include industry consolidation, profitability, general strategies, differentiation, market growth, etc. This does not include individual competitor data Examples include names of competitors, market share, profitability, and specific strategies thereof Start thinking of the key dimensions by which you can compare your company with competitors Even if you are unsure if this will ultimately be positive, include it as a strength if the case mentions it Be very careful to identify as many weaknesses as possible as they drive strategies

Industry - IND (this pertains to any issues that affect the specific industry under study not companies or general environmental issues) Competition COM (specific identification and data related to competitors in the stated industry) Strength STR (any facts that appear to be positive for the company under study) Weakness - WEA (any facts that appear to be negative for the company under study)

Case Template - Labeling


General Environment: Industry: Competition:

Label in the case and capture here Strengths: Weaknesses:

Note: Answer key is at the end of this deck; please attempt to fill in the template before looking at possible answers

Model for Effective Case Analysis


Case Analysis Process
1. Framing 2. Labeling 3. Summarizing 4. Synthesizing 5. Concluding

What are the objectives? Identify the key question Flip through the case Skim read the case Carefully read the beginning and end

What are the facts? Label the facts in the margins of the case: General (GEN) Industry (IND) Competition (COM) Strength (STR) Weakness (WEA)

What is important? Summarize the facts Eliminate unimportant Eliminate redundant Mark most important

What are the options? State the 1-3 key questions Identify options (MECE) State decision criteria Summarize pros/cons

What is the answer? Take a position Identify the few key supporting facts Discuss implementation Mention risks

The key to good case analysis is to break down the case facts into a clear, understandable and useful form

Phase 3 Summarizing
Key Question: What is important?
STEPS
Summarize the facts (the overall goal here is to pull out the key facts that have been marked in the case)

TIPS
This process can take some time, but do not attempt to include everything that has been marked Set up some blank templates to be filled in by using the material covered in the respective textbook (common frameworks are STEEP, Porters 5 Forces, 3 Cs company, customers and competition, 4 Ps product, price, place and promotion, & financial ratios) This is one of the hardest elements to effective case analysis, but perhaps the most important As you sort through the facts, ask so what about the fact and try to calculate if you think it may change the final answer As you pull out a fact for the summaries, mark out related facts throughout the case to avoid redundancy Dont stress about not including something you can always come back to the case at a later point In the end, the conclusion will be based on a few critical data points; the key is to start looking for these facts as you go

Eliminate unimportant facts (think of this as creating two piles - important vs. unimportant facts)

Eliminate redundant facts (as you go, you will begin to see redundancy in the facts, so eliminate and combine related facts)

Mark most important facts (highlight the most important facts)

Case Template Summarizing


General Environment: Limit to 3-4 most important

Industry: Limit to 3-4 most important

External
Competition: Limit to 3-4 most important

What is really important?


Strengths (of company under study): Limit to 3-4 most important

Internal
Weaknesses (of company under study): Limit to 3-4 most important

Note: Answer key is at the end of this deck; please attempt to fill in the template before looking at possible answers

Model for Effective Case Analysis


Case Analysis Process
1. Framing 2. Labeling 3. Summarizing 4. Synthesizing 5. Concluding

What are the objectives? Identify the key question Flip through the case Skim read the case Carefully read the beginning and end

What are the facts? Label the facts in the margins of the case: General (GEN) Industry (IND) Competition (COM) Strength (STR) Weakness (WEA)

What is important? Summarize the facts Eliminate unimportant Eliminate redundant Mark most important

What are the options? State the 1-3 key questions Identify options (MECE) State decision criteria Summarize pros/cons

What is the answer? Take a position Identify the few key supporting facts Discuss implementation Mention risks

The key to good case analysis is to break down the case facts into a clear, understandable and useful form

Phase 4 Synthesizing
Key Question: What are the options?
STEPS
State the 1-3 key questions (decide what the few key questions to the case are, note that it may be that there is only one key question) Identify options - MECE (for each question, list out the options or alternatives, using the MECE format as described in tips)

TIPS
Go back to the key questions identified in the first step Do not include more than 3 key questions (otherwise they likely are not key) MECE stands for Mutually Exclusive, Collectively Exhaustive Examples of MECE are timing-day/night; profitrevenue/expenses; expand oversees yes/no; etc. This is a step that many people skip and as a result, it is difficult to reach a decision Explicitly state the decision criteria before deciding (examples include profit, market share, growth, impact on shareholders, implementation effort, timing, fit with overall vision, etc.) Review the summarized facts to find support for and against alternatives Prioritize the pros and cons based upon decision criteria

State decision criteria (an important step is to identify the few dimensions that will be used to decide between options/alternatives)

Summarize pros/cons (list out the support for and against each option/alternative)

Case Template Synthesizing


Questio Option / Decisio Pros n Hypothe n sis Criteria Cons

Note: Answer key is at the end of this deck; please attempt to fill in the template before looking at possible answers

Model for Effective Case Analysis


Case Analysis Process
1. Framing 2. Labeling 3. Summarizing 4. Synthesizing 5. Concluding

What are the objectives? Identify the key question Flip through the case Skim read the case Carefully read the beginning and end

What are the facts? Label the facts in the margins of the case: General (GEN) Industry (IND) Competition (COM) Strength (STR) Weakness (WEA)

What is important? Summarize the facts Eliminate unimportant Eliminate redundant Mark most important

What are the options? State the 1-3 key questions Identify options (MECE) State decision criteria Summarize pros/cons

What is the answer? Take a position Identify the few key supporting facts Discuss implementation Mention risks

The key to good case analysis is to break down the case facts into a clear, understandable and useful form

Phase 5 Concluding
Key Question: What is the answer?
STEPS
Take a position (this is the exciting end to analysis; the first step is to decide what the best supported answer is to the key question)

TIPS
Dont be afraid to take a stand even if you feel that you do not have enough data any position is better than no position Avoid the typical compromise solution (pursue both of the alternatives) The best arguments are clear statements that are supported by 2-3 key data-based observations Be very familiar with the underlying assumptions, facts, and numbers when you present in class Think in terms of the few key action steps that must be taken A checklist for consideration includes changes in staff, style, systems, structure, shared values, and skills This is the chance to show that you have completed a thorough analysis and considered what may go wrong Do not underestimate the power of the caveat!

Identify the few key supporting facts (pull out the most important support from the summaries and pros/cons analysis)

Discuss implementation (one way to differentiate a good case analysis is the consideration of what it would take to implement the recommendation) Mention risks (the final step is to identify risk and contingencies that may be encountered if the recommended course of action is pursued)

Case Template - Concluding

Overall Recommendation
Risks

Implementation

Key Supporting Facts

Note: Answer key is at the end of this deck; please attempt to fill in the template before looking at possible answers

Final Tips
The key to success in case analysis is to take a structured approach to organizing and using facts It is easy to get carried away with too much data and lose sight of the need for a clear story with a few supporting ideas Prepare for multiple outcomes and see the pros and cons Use hypotheses to focus analysis but do not get personally attached to one (possible solution) In strategic management, there is no one right answer, but there are better and worse ways to present ideas

Model for Effective Case Analysis


Case Analysis Process
1. Framing 2. Labeling 3. Summarizing 4. Synthesizing 5. Concluding

What are the objectives? Identify the key question Flip through the case Skim read the case Carefully read the beginning and end

What are the facts? Label the facts in the margins of the case: General (GEN) Industry (IND) Competition (COM) Strength (STR) Weakness (WEA)

What is important? Summarize the facts Eliminate unimportant Eliminate redundant Mark most important

What are the options? State the 1-3 key questions Identify options (MECE) State decision criteria Summarize pros/cons

What is the answer? Take a position Identify the few key supporting facts Discuss implementation Mention risks

The key to good case analysis is to break down the case facts into a clear, understandable and useful form

You might also like