CS3251 - Programming in C

File Processing in c
 Introduction

CS3251 - Programming in C 2 10/17/2024

What is a File?
• A named collection of data, typically stored in a secondary
storage (e.g., hard disk).

Examples
• Records of all employees in an organization
• Document files created using Microsoft Word
• Video of a movie
• Audio of a music

• Non-volatile data storage

• Can be used when power to computer is off

CS3251 - Programming in C 3 10/17/2024

How a File is Stored?
• Stored as sequence of bytes, logically contiguous (may not be
physically contiguous on disk).
• Discrete storage unit for data in the form of a stream of bytes.
• Every file is characterized with a starting of file, sequence of bytes
(actual data), and end of stream (or end of file).
• Allow only sequential access of data by a pointer performing.
• Meta-data (information about the file) before the stream of actual
data can be maintained to have a knowledge about the data stored
in it.

CS3251 - Programming in C 4 10/17/2024

How a File is Stored?

Start EOF
Meta Data 40 65 87 90 24 67 89 90 60 0

File pointer

Note:
• The last byte of a file contains the end end-of-file character
(EOF, with ASCII code 1A (Hex).
• While reading a file, the EOF character can be checked to
know the end.
CS3251 - Programming in C 5 10/17/2024
Type of Files
• Text files
– Contain ASCII code only
• C-programs

• Binary files
– Contain non-ASCII characters
• Image, audio, video, executable, etc.

What type of file a .docx file produced by MS-Word?

CS3251 - Programming in C 6 10/17/2024

 File Handling in C

CS3251 - Programming in C 7 10/17/2024

Operations on Files
• Typical operations on a file are
• Open : To open a file to store/retrieve data in it

• Read : The file is used as an input

• Write : The file is used as output

• Close : Preserve the file for a later use

• Access: Random accessing data in a file

CS3251 - Programming in C 8 10/17/2024

 Opening and Closing a File

CS3251 - Programming in C 9 10/17/2024

File Handling Commands
• Include header file <stdio.h> to access all file handling
utilities.
• A data type namely FILE is there to create a pointer to a file.
Syntax
FILE * fptr; // fptr is a pointer to file

• To open a file, use fopen() function

Syntax
FILE * fopen(char *filename, char *mode)

• To close a file, use fclose() function

Syntax
int fclose(FILE *fptr);
CS3251 - Programming in C 10 10/17/2024
fopen() function
• The first argument is a string to characters indicating the name of
the file to be opened.
• The convention of file name should follow the convention of giving file
name in the operating system.

Examples:
xyz12.c student.data File PDS.txt

myFile

CS3251 - Programming in C 11 10/17/2024

fopen() function
• The second argument is to specify the mode of file opening.
There are five file opening modes in C
• "r" : Opens a file for reading

• "w" : Creates a file for writing (overwrite, if it contains data)

• "a" : Opens a file for appending - writing on the end of the file

• “rb” : Read a binary file (read as bytes)

• “wb” : Write into a binary file (overwrite, if it contains data)

• It returns the special value NULL to indicate that it couldn't open

the file.
CS3251 - Programming in C 12 10/17/2024
fopen() function
• If a file that does not exist is opened for writing or appending, it
is created as a new.
• Opening an existing file for writing causes the old contents to be
discarded.
• Opening an existing file for appending preserves the old contents,
and new contents will be added at the end.
• File opening error
• Trying to read a file that does not exist.
• Trying to read a file that doesn’t have permission.
• If there is an error, fopen() returns NULL.

CS3251 - Programming in C 13 10/17/2024

Example: fopen()
#include <stdio.h>
void main()
{
FILE *fptr; // Declare a pointer to a file
char filename[]= "file2.dat";
fptr = fopen(filename,"w");
// Also, alternatively
// fptr = fopen (“file2.dat”,"w");
if (fptr == NULL) {
printf (“Error in creating file”);
exit(-1); // Quit the function
}
else /* code for doing something */
}

CS3251 - Programming in C 14 10/17/2024

 Reading from a File

CS3251 - Programming in C 15 10/17/2024

Reading from a File
• Following functions in C (defined in stdio.h) are usually used
for reading simple data from a file
• fgetc(…)

• fscanf(…)

• fgets(…)

• getc(…)

• ungetc(…)

CS3251 - Programming in C 16 10/17/2024

Reading from a File: fgetc()
Syntax for fgetc(…)
int fgetc(FILE *fptr)

• The fgetc() function returns the next character in the stream fptr as an
unsigned char (converted to int).

• It returns EOF if end of file or error occurs.

FILE *fptr;
int c;
/* Open file and check it is open */
while ((c = fgetc(fptr)) != NULL)
{
printf ("%c",c);
}

CS3251 - Programming in C 17 10/17/2024

Reading from a File: fscanf()
Syntax for fscanf(…)
int fscanf(FILE *fptr, char *format, ...);

• fscanf reads from the stream fptr under control of format and assigns
converted values through subsequent assignments, each of which must be a
pointer.
• It returns when format is exhausted.

• fscanf returns EOF if end of file or an error occurs before any conversion.

• it returns the number of input items converted and assigned.

CS3251 - Programming in C 18 10/17/2024

Example: Using fscanf(…)
FILE *fptr; input.dat
fptr= fopen (“input.dat”,“r”);
int n; 20 30 40 50
/* Check it's open */
if (fptr == NULL)
{
printf(“Error in opening file \n”);
}

n = fscanf(fptr,“%d %d”,&x,&y);
x = 20
x = 30
...

CS3251 - Programming in C 19 10/17/2024

Reading from a File: fgets(…)
Syntax for fgets(…)
char *fgets(char *s, int n, FILE *fptr)
s The array where the characters that are read will be stored.
n The size of s.
fptr The stream to read.

• fgets() reads at most n-1 characters into the array s, stopping if a

newline is encountered.
• The newline is included in the array, which is terminated by ‘\0’.

• The fgets() function returns s or NULL if EOF or error occurs.

CS3251 - Programming in C 20 10/17/2024

Example: Using fgets(…)

FILE *fptr;
char line [1000];
/* Open file and check it is open */

while (fgets(line,1000,fptr) != NULL)

{
printf ("Read line %s\n",line);
}

CS3251 - Programming in C 21 10/17/2024

Reading a File: getc(…)
Syntax for getc(…)
int getc(FILE *fptr)
• getc(…) is equivalent to fgetc(…) except that it is a macro.

CS3251 - Programming in C 22 10/17/2024

Example: Using getc(…)
C program to read a text file and then print the content on the screen.
#include <stdio.h>
#include <stdlib.h>
int main()
{
int ch, fileName[25];
FILE *fp;
printf("Enter the name of file you wish to read\n");
gets(fileName);
fp = fopen(fileName,"r"); // read mode

if( fp == NULL )
{
printf("Error while opening the file.\n");
exit(-1);
}
OUTPUT
printf("The contents of %s file are :\n", fileName);
while( ( ch = getc(fp) ) != EOF )
Enter the name of file you wish to read
printf("%c",ch);
test.txt
fclose(fp); The contents of test.txt file are :
return 0; C programming is fun.
}

CS3251 - Programming in C 23 10/17/2024

Undo a File Reading: ungetc()
ungetc(): Push a character back onto an input stream.
Syntax:
int ungetc(int c, FILE *fptr)
Arguments:
c The character that you want to push back.
fptr The stream you want to push the character back on.
• Only one character of pushback is guaranteed per file.
• ungetc may be used with any of the input functions like
scanf, getc, or getchar.

CS3251 - Programming in C 24 10/17/2024

Example: ungetc()

#include <stdio.h>
int main(void)
{ OUTPUT
int ch;
a
while ((ch = getchar()) != '1') // reads characters from the stdin a
putchar(ch); // and show them on stdout until encounters
v '1'
v
ungetc(ch, stdin); // ungetc() returns '1' previously read back to stdin
c
c
ch = getchar(); // getchar() attempts to read next character from stdin
u
// and reads character '1' returned back to the stdin by ungetc()
u
putchar(ch); // putchar() displays character 1
puts(""); 1
Thank you!
printf("Thank you!\n");
return 0;
}

CS3251 - Programming in C 25 10/17/2024

 Writing into a File

CS3251 - Programming in C 26 10/17/2024

Writing into a File
• Following functions in C (defined in stdio.h) are usually used
for writing simple data into a file
• fputc(…)

• fprintf(…)

• fputs(…)

• putc(…)

CS3251 - Programming in C 27 10/17/2024

Writing into a File: fputc(…)
Syntax for fputc(…)
int fputc(int c, FILE *fptr)

• The fputc() function writes the character c to file fptr and returns the
character#include <stdio.h>
written, or EOF if an error occurs.

filecopy(File *fpIn, FILE *fpOut)

{
int c;

while ((c = fgetc(fpIn) != EOF)

fputc(c, fpOut);
}
CS3251 - Programming in C 28 10/17/2024
Writing into a File: fprintf(…)
Syntax for fprintf(…)
int fprintf(FILE *fptr, char *format,...)
• fprintf() converts and writes output to the steam fptr under the control
of format.

• The function is similar to printf() function except the first argument

which is a file pointer that specifies the file to be written.

• The fprintf() returns the number of characters written, or negative if an

error occur.

CS3251 - Programming in C 29 10/17/2024

Writing into a File: fprintf(…)
#include <stdio.h>

void main()

{
FILE *fptr;
fptr = fopen(“test.txt”, “w”);

fprintf(fptr, “Programming in C is really a fun!\n”);

fprintf(fptr, “Let’s enjoy it\n”);

fclose(fptr);

return;
}

CS3251 - Programming in C 30 10/17/2024

Writing into a File: fputs()
Syntax for fputs:
int fputs(char *s, FILE *fptr)

• The fputs() function writes a string (which need not contain a newline) to
a file.

• It returns non-negative, or EOF if an error occurs.

CS3251 - Programming in C 31 10/17/2024

Example: fputs(…)
#include <stdio.h>

void main()

{
FILE *fptr;
fptr = fopen(“test.txt”, “w”);

fputs(“Programming in C is really a fun!”, fptr);

fputs(“\n”, fptr);
fputs(“Let’s enjoy it \n”, fptr);

fclose(fptr);

return;
}

CS3251 - Programming in C 32 10/17/2024

Writing into a File: putc(…)
Syntax for putc(…)
int putc(FILE *fptr)

• The putc() function is same as the putc(…).

#include <stdio.h>

filecopy(File *fpIn, FILE *fpOut)

{
int c;

while ((c = getc(fpIn) != EOF)

putc(c, fpOut);
}
CS3251 - Programming in C 33 10/17/2024
Writing into a File: Example
• A sample C program to write some text reading from the
keyboard and writing them into a file and then print the content
from the file<stdio.h>
#include on the screen.

main()

{
FILE *f1;

char c;

printf("Data Input\n\n");
/* Open the file INPUT */
Contd…
f1 = fopen("INPUT", "w");
CS3251 - Programming in C 34 10/17/2024
Writing into a File
while((c=getchar()) != EOF) /* Get a character from keyboard*/
OUTPUT
putc(c,f1); /* Write a character to INPUT*/
Data Input

fclose(f1); /* Close the file INPUT*/ This is a program to test

printf("\nData Output\n\n"); the file handling features on
this system
f1 = fopen("INPUT","r"); /* Reopen the file INPUT */
Data Output
while((c=getc(f1)) != EOF) /* Read a character from INPUT*/
printf("%c",c); /* Display a character on screen */
This is a program to test
fclose(f1); /* Close the file INPUT */ the file handling features on
this system
}

CS3251 - Programming in C 35 10/17/2024

 Special Streams in C

CS3251 - Programming in C 36 10/17/2024

Special Streams
• When a C program is started, the operating system environment is
responsible for opening three files and providing file pointer for
them. These files are

• stdin Standard input. Normally it is connected to keyboard

• stdout Standard output, In general, it is connected to display

screen

• stderr It is also an output stream and usually assigned to a

program in
the same way that stdin and stderr are. Output written on
stderr normally appears on the screen

Note:
getc(stdin) is same as fgetc (stdin)
CS3251 - Programming in C 37 10/17/2024
Special Streams

fprintf (stdout,"Hello World!\n");

printf(“"Hello World!\n");

The above two statements are same!

CS3251 - Programming in C 38 10/17/2024

Example: Special Streams
#include <stdio.h>
main()
{
int i;

fprintf(stdout,"Give value of i \n");

fscanf(stdin,"%d",&i);
fprintf(stdout,"Value of i=%d \n",i);

OUTPUT
Give value of i
15
Value of i=15

CS3251 - Programming in C 39 10/17/2024

Error Handling : stderr and exit
• What happens if the errors are not shown in the screen instead
if it's going into a file or into another program via a pipeline.
• To handle this situation better, a second output stream, called
stderr, is assigned to a program in the same way that
stdin and stdout are.
• Output written on stderr normally appears on the screen
even if the standard output is redirected.

CS3251 - Programming in C 40 10/17/2024

Example: Error Handling

#include <stdio.h>

/* cat: concatenate files */

main(int argc, char *argv[])
{
FILE *fp;
void filecopy(FILE *, FILE *);
char *prog = argv[0]; /* program name for errors */

if (argc == 1 ) /* no args; copy standard input */

filecopy(stdin, stdout);
else
while (--argc > 0)

Contd…
CS3251 - Programming in C 41 10/17/2024
Example: Error Handling

if ((fp = fopen(*++argv, "r")) == NULL) {

fprintf(stderr, "%s: can't open %s\n", prog, *argv);
exit(1);
} else {
filecopy(fp, stdout);
fclose(fp);
}

if (ferror(stdout)) {
fprintf(stderr, "%s: error writing stdout\n", prog);
exit(2);
}
exit(0);
}

CS3251 - Programming in C 42 10/17/2024

 Direct Input and Output

CS3251 - Programming in C 43 10/17/2024

Structured Input/Output for Files
• Other than the simple data, C language provides the following
two functions for storing and retrieving composite data.

• fwrite() To write a group of structured data

• fread() To read a group of structured data

CS3251 - Programming in C 44 10/17/2024

Writing Records: fwrite()
fwrite() writes data from the array pointed to, by ptr to the
given stream fptr.
Syntax:

int fwrite(void *ptr, int size, int nobj, FILE *fptr);

• ptr This is the pointer to a block of memory with a minimum size of

size *nobj bytes.
• size This is the size in bytes of each element to be written.
• nobj This is the number of elements, each one with a size of size bytes.
• fptr This is the pointer to a FILE object that specifies an output stream.

CS3251 - Programming in C 45 10/17/2024

Example: fwrite()
#include<stdio.h>

struct Student
{
int roll;
char name[25];
float marks;
};

void main()
{
FILE *fp;
int ch;
struct Student Stu;

fp = fopen("Student.dat","w"); //Statement 1

if(fp == NULL)
{
printf("\nCan't open file or file doesn't exist.");
exit(0);
}
Contd…
CS3251 - Programming in C 46 10/17/2024
Example: fwrite()
do
{
printf("\nEnter Roll : ");
scanf("%d",&Stu.roll);

printf("Enter Name : ");

scanf("%s",Stu.name);

printf("Enter Marks : ");

scanf("%f",&Stu.marks);

fwrite(&Stu,sizeof(Stu),1,fp);

printf("\nDo you want to add another data (y/n) : ");

ch = getchar();

}while(ch=='y' || ch=='Y');

printf("\nData written successfully...");

fclose(fp);
}

Contd…
CS3251 - Programming in C 47 10/17/2024
Example: fwrite()
OUTPUT

Enter Roll : 1
Enter Name : AA
Enter Marks : 78.53
Do you want to add another data (y/n) : y

Enter Roll : 2
Enter Name : BB
Enter Marks : 72.65
Do you want to add another data (y/n) : y

Enter Roll : 3
Enter Name : CC
Enter Marks : 82.65
Do you want to add another data (y/n) : n

Data written successfully...

CS3251 - Programming in C 48 10/17/2024

Reading Records: fread()
fread() reads data from the given stream into the array pointed
to, by ptr.
Syntax:

int fread(void *ptr, int size, int nobj, FILE *fptr);

• ptr This is the pointer to a block of memory with a minimum size of

size *nobj bytes.
• size This is the size in bytes of each element to be read.
• nobj This is the number of elements, each one with a size of size bytes.
• fptr This is the pointer to a FILE object that specifies an input stream.

CS3251 - Programming in C 49 10/17/2024

Example: fread()
#include<stdio.h>

struct Student
{
int roll;
char name[25];
float marks;
};

void main()
{
FILE *fp;
int ch;
struct Student Stu;

fp = fopen("Student.dat","r"); //Statement 1

if(fp == NULL)
{
printf("\nCan't open file or file doesn't exist.");
exit(0);
}

Contd…
CS3251 - Programming in C 50 10/17/2024
Example: fread()
printf("\n\tRoll\tName\tMarks\n");

while(fread(&Stu,sizeof(Stu),1,fp)>0)
printf("\n\t%d\t%s\t
%f",Stu.roll,Stu.name,Stu.marks);

fclose(fp);
}

OUTPUT

Roll Name Marks

1 AA 78.53
2 BB 72.65
3 CC 82.65

CS3251 - Programming in C 51 10/17/2024

 Random Accessing Files

CS3251 - Programming in C 52 10/17/2024

File Positioning Functions in C
• When doing reads and writes to a file, the OS keeps track of where
you are in the file using a counter generically known as the file
pointer.

• So long we have learnt about the sequential access in a file.

• The following are the functions to access file at random
• ftell() Tell the current position of the file pointer
• fseek() To position a file pointer at a desired place
within the file
• rewind() Is equivalent to fseek()

CS3251 - Programming in C 53 10/17/2024

Random Accessing a File: ftell()
long ftell(FILE *fptr);

• ftell() takes a file pointer fptr and returns in a number

of type long, that corresponds to the current position.
• It returns -1L on error.

Example
long n;
n = ftell(fptr);
Note:
In this case, n gives the relative offset (in bytes) of the current position. This
means that n bytes have already been read (or written).
CS3251 - Programming in C 54 10/17/2024
Random Accessing a File: fseek()
int fseek(FILE *fptr, long offset, int whence/origin);

• fseek() function is used to move the file position to a

desired location within the file.
• The first argument is the file in question. offset argument is
the position that you want to seek to, and whence is what that
offset is relative to.
• You can set the value of whence to one of the three things:
SEEK_SET offset is relative to the beginning of the file.
SEEK_CUR offset is relative to the current file pointer position.
SEEK_END offset is relative to the end of the file.

CS3251 - Programming in C 55 10/17/2024

Example: fseek()
• You can set the value of whence to one of the three things:

fseek(fp, 0L, SEEK_SET); // go to the beginning

fseek(fp, 0L, SEEK_CUR); // Stay at the current position
fseek(fp, 0L, SEEK_END); // go to the end of the file, i.e., past
the last character of the file
fseek(fp, 0L, SEEK_SET); // go to the beginning

fseek(fp, m, SEEK_SET); // Move to (m+1)th byte in the file

fseek(fp, m, SEEK_CUR); // Go forward by m bytes
fseek(fp, -m, SEEK_CUR); // Go backward by m bytes from the
current position
fseek(fp, -m, SEEK_END); // Go back by m bytes from the end

CS3251 - Programming in C 56 10/17/2024

Random Accessing a File: rewind()
void rewind(FILE *fptr);

• rewind(): It repositions the file pointer at the beginning of

the file

Example
rewind (fptr); // Set the file pointer at the beginning
fseek(fptr, 0L, SEEK_SET); // same as the rewind()

CS3251 - Programming in C 57 10/17/2024

fseek() vs. rewind()
Return value
• For fseek(), on success zero is returned; -1L is returned on
failure.
• The call to rewind() never fails.
Examples:

fseek(fp, 100, SEEK_SET); // seek to the 100th byte of the file

fseek(fp, -30, SEEK_CUR); // seek backward 30 bytes from the current position
fseek(fp, -10, SEEK_END); // seek to the 10th byte before the end of file

fseek(fp, 0, SEEK_SET); // seek to the beginning of the file

rewind(fp); // seek to the beginning of the file

CS3251 - Programming in C 58 10/17/2024

 Examples

CS3251 - Programming in C 59 10/17/2024

File Handling : Example 1
A program to copy a text file to another file.
#include <stdio.h>
#include <stdlib.h>

int main()
{
char ch, sourceFile[20], targetFile[20];
FILE *source, *target;

printf("Enter name of file to copy\n");

gets(sourceFile);

source = fopen(sourceFile, "r");

if( source == NULL )

{
printf(“Input file error. Program abort...\n");
exit(-1);
}
CS3251 - Programming in C 60 10/17/2024
Contd…
File Handling : Example 1
printf("Enter name of target file\n");
gets(target_file);

target = fopen(targetFile, "w");

if( target == NULL )

{
fclose(source);
printf(“Output File Error! File copy fails...\n");
exit(-1);
}

while( (ch = fgetc(source) ) != EOF )

fputc(ch, target);

printf("File copied successfully.\n");

fclose(source);
fclose(target);

return 0;
}
CS3251 - Programming in C 61 10/17/2024
File Handling : Example 2
A program to copy a text file to another file. Read the file names through command line.

#include <stdio.h>
#include <stdlib.h>

int main(int argc, char *argv[])

{
char ch;
FILE *source, *target;

source = fopen(argv[1], "r");

if( source == NULL )

{
printf(“Input file error. Program abort...\n");
exit(-1);
}

CS3251 - Programming in C 62 10/17/2024

Contd…
File Handling : Example 2
target = fopen(argv[2], "w");

if( target == NULL )

{
fclose(source);
printf(“Output File Error! File copy fails...\n");
exit(-1);
}

while( (ch = fgetc(source) ) != EOF )

fputc(ch, target);

printf("File copied successfully.\n");

fclose(source);
fclose(target);

return 0;
}

CS3251 - Programming in C 63 10/17/2024

File Handling : Example 3
A program to concatenate a file (say A) to another file (say B) so that the resultant file is A
= A+B. Read the file names for A and B through command line.

#include <stdio.h>
#include <stdlib.h>

int main(int argc, char *argv[])

{
int ch;
FILE *fpA, *fpB;

fpB = fopen(argv[2], "r"); //Open the file B

if( fpB == NULL )

{
printf(“Input file error. Program abort...\n");
exit(-1);
}

CS3251 - Programming in C 64 10/17/2024

Contd…
File Handling : Example 3
fpA = fopen(argv[1], “a"); //Open the file A in append mode

if( fpA == NULL )

{
fclose(fpA);
printf(“Output File Error! File merging fails...\n");
exit(-1);
}

while( (ch = fgetc(fpA) ) != EOF )

fputc(ch, fpA);

printf("Files are concatenated successfully.\n");

fclose(fpA);
fclose(fpB);

return 0;
}

CS3251 - Programming in C 65 10/17/2024

File Handling : Example 4
A program to encrypt a text file. Read the file names through command line.

#include <stdio.h>
#include <stdlib.h>

int main(int argc, char *argv[])

{
char ch;
FILE *source, *target;

source = fopen(argv[1], "r");

if( source == NULL )

{
printf(“Input file error. Program abort...\n");
exit(-1);
}

CS3251 - Programming in C 66 10/17/2024

Contd…
File Handling : Example 4
target = fopen(argv[2], "w");

if( target == NULL )

{
fclose(source);
printf(“Output File Error! File copy fails...\n");
exit(-1);
}

while( (ch = fgetc(source) ) != EOF )

fputc(ch+10, target); //Change the character...

printf("File copied successfully.\n");

fclose(source);
fclose(target);

return 0;
}

CS3251 - Programming in C 67 10/17/2024

File Handling : Example 5
A program to display a file on the screen. Read the file name through command line.
#include <stdio.h>
#include <stdlib.h>

int main(int argc, char *argv[])

{
char ch;
FILE *source, *target;

source = fopen(argv[1], "r");

if( source == NULL )

{
printf(“Input file error. Program abort...\n");
exit(-1);
}

while( (ch = fgetc(source) ) != EOF )

fputc(ch);

fclose(source);

return 0;
}
CS3251 - Programming in C 68 10/17/2024
File Handling : Example 6
A program to store a record in file. Read the file and store all records in an array.

#include <stdio.h>
#include <stdlib.h>

struct Student {
int rollNo;
char name[20];
float marks;
};

int main(int argc, char *argv[])

{
int choice = 1;
struct Student *data;
FILE *outfile, *infile;

outfile = fopen(argv[1], “w");

if( outfile == NULL )

{
printf(“Input file error. Program abort...\n");
exit(-1);
}

CS3251 - Programming in C 69 10/17/2024

Contd…
File Handling : Example 6
A program to store a record in file. Read the file and store all records in an array.

while (choice) {
data = (struct *)malloc(sizeof(struct Student));
if (data != NULL) {
printf(\nEnter Roll No: “); scanf(“%d”,&data->rollNo;);
printf(\nEnter Name: “); scanf(“%s”,data->name;);

fwrite (data, sizeof(struct Student), 1, outfile);

printf(“\nDo you want to add more record (Type 0 for NO)?”);

scanf(“%d”, &choice);
}
}

fclose(outfile);

return 0;
}

CS3251 - Programming in C 70 10/17/2024

Contd…
File Handling : Example 6

infile = fopen(argv[1], “r");

struct Student data[100];

if( infile == NULL )

{
printf(“File error. Program abort...\n");
exit(-1);
}
choice = 0;

while (fread (&data, sizeof(struct Student), 1, infile))

data[choice++] = data;
}

return 0;
}

CS3251 - Programming in C 71 10/17/2024

 Any question?

You may post your question(s) at the “Discussion

Forum” maintained in the course Web page.
CS3251 - Programming in C 72 10/17/2024
Problems to Ponder…

CS3251 - Programming in C 73 10/17/2024

Problems for Practice…

CS3251 - Programming in C 74 10/17/2024