Scribd
Upload
109 views25 pages

Switching System

This document provides an overview of switching systems used in telecommunications networks, focusing on those used by Bharat Sanchar Nigam Limited (BSNL), the largest telecommunications provider in India. It discusses two main switching systems: C-DOT, an indigenous system developed in India; and OCB, a French-developed digital switching system. C-DOT uses time and space division multiplexing and can handle high traffic volumes. OCB-283 is a more advanced digital switching system than C-DOT, with features like a maximum of 2048 PCM channels and modular architecture. Signaling and call processing functions are also described briefly.

Uploaded by

Sameera Ippili
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
109 views25 pages

Switching System

This document provides an overview of switching systems used in telecommunications networks, focusing on those used by Bharat Sanchar Nigam Limited (BSNL), the largest telecommunications provider in India. It discusses two main switching systems: C-DOT, an indigenous system developed in India; and OCB, a French-developed digital switching system. C-DOT uses time and space division multiplexing and can handle high traffic volumes. OCB-283 is a more advanced digital switching system than C-DOT, with features like a maximum of 2048 PCM channels and modular architecture. Signaling and call processing functions are also described briefly.

Uploaded by

Sameera Ippili
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
You are on page 1/ 25

SYSTEMS

Click to edit Master subtitle style

Presented by G . prameela 08B21A0425.


5/5/12

OVER VIEW

ABSTRACT SYSTEM TYPES

INTRODUCTION SWITCHING C-DOT CALLPROCESSING SIGNALING OCB


5/5/12

ABSTRACT
Switching

signalling & transmission function are essential to the operation of Telecommunication networks The switching system identifies and connects the subscribers to the suitable transmission parts.

Switching

systems are upgraded enable networks to provide the 5/5/12

INTRODUCTION

BHARAT SANCHAR NIGAM LIMITED is abbreviated as BSNL is the No. 1 telecommunication company and the largest public sector under taking of India fourth largest department

BSNL

It is 5/5/12

What is Switching System?


Switching

System is a system of switches providing physical path between source and destination.

5/5/12

Types of switching systems

5/5/12

The world famous communication network BSNL consisting of two types of switching systems they are

C-DOT OCB

5/5/12

C-DOT
The It It

Center for Development Of Telemetric (C-DOT) is establish in Aug 1984 as an autonomous body.

was vested with full authority and total flexibility to develop state-of-the-art telecommunication technology to meet the needs of the Indian telecommunication network 5/5/12

This switching system uses time division & space division multiplexing. High traffic/load handling capacity 8,00,000 BHCA with termination capacity of 40,000 lines as local exchange or 15,000 trunks as trunk . Automation exchange is been provided in C-dot.

5/5/12

5/5/12

ARCHITECTURE OF CDOT DASS MAX

Four Basic Modules In C-DOT.


1.Base module 2.Central module 3.Administrative module 4.Input output module

5/5/12

BASE MODULE CONFIGURATION

5/5/12

5/5/12

CENTRAL

CM CONFIGURATION

CM CABINET LARGE

CM CABINET EXTRA LARGE

5/5/12

Central

DIFFERENCES OF CMXL,CML
Module large

1.There are one


5/5/12

Centraltwo BTU and two 1. There are Module SSU. Extra Large (CM-

XL)
2. The 8 MHz clock may be locally generated at the Central Clock (CCK) Card in CM-XL. Or may be derived by using Network Synchronization Controller Card. 3. In CM-XL, CM provides connectivity to 32 BMs. 4. Each message switch is a

INPUT OUTPUT MODULE


A

Subscriber has some facilities like call connection,bills information like all these operations are recognised by using some commands in input output module example:the status of an subscribers,AI channels and PHC terminals can be seen by using this command

For

5/5/12

CALL PROCESSING IN CDOT


Origination Digit

analysis

Routing/Screening Charging Termination

5/5/12

SIGNALING
What

is Signaling?

Signaling

refers to the exchange of information between call components required to provide and maintain service.

5/5/12

OCB

OCB is the French technology switching system & is abbreviated as organecontrallebinare. OCB is a digital switching system which supports a variety of communication needs like telephony, ISDN, internet to mobile & data communication & lot more. is a digital switching system with single T stage switch.

It

OCB is an advanced switching system than C-DOT. The urban area 5/5/12

Salient features of OCB-283


It

is a digital switching system with an angle T stage switch a maximum of 2048 PCM can be conducted. It supports both analog &digital has a double recovery feature exchange can be man aged locally or from an NMC through 64kbps links. OCB-283 systems are made of 35 types of cards system has modular structer.the

OCB-283 The The


5/5/12 The

APPLICATIONS
The The

communication switching system enables the universal connectivity telecommunication links and switching were mainly designed for voice Communication. the appropriate attachments/equipments, they can be used to transmit data. (speech) television

With

Telephone Broadcast
5/5/12

conclusion

Switching System provides many services to the customers and also provides communications among subscribers in their exchanges. is more advantageous than CDOT . systems is most widely used now-adays.

OCB SS7

5/5/12

REFERENCES
C-DOT C-DOT

Library

DSS MAX General Description

www.cdot.com

ABook Digital Switching System by Saied Ali

5/5/12

THANK Q.

5/5/12

Questions?

5/5/12

You might also like