DADIMOS BUSINESS AND TECHNOLOGY

COLLEGE
HARDWARE AND NETWORKING SERVICE LEVEL – IV
Unit of Competence: : Provide Network System Administration
Unit one: Client access and security

Prepared By Instructor Tadesse.B

 Basic concept of network system administration
 Network system administration involves managing and maintaining the operation, security,
and performance of a network infrastructure.
 It encompasses various tasks and responsibilities to ensure the network functions reliably
and efficiently.
 Network administration aims to manage, monitor, maintain, secure, and service an
organization’s network. However, the specific tasks and procedures may vary depending on
the size and type of an organization.
 Network administration primarily consists of, but is not limited to, network monitoring,
network management, and maintaining network quality and security.
 Network monitoring is essential to monitor unusual traffic patterns, the health of the network
infrastructure, and devices connected to the network.
 It helps detect abnormal activity, network issues, or excessive bandwidth consumption early
on and take preventative and remedial actions to uphold the network quality and security.
 Network management encompasses multiple administrative functions, including network
planning, implementation, and configuration. It involves:
 Network management It involves:
Re-planning the network based on changing organizational requirements
Implementing the network for maximum efficiency
Configuring various networking and security protocols
Applying security patches and updating the firmware of the networking infrastructure, such
as routers, hubs, switches, and firewalls
Assessing the network for weaknesses
Evaluating quality and capacity to increase or decrease network capacity and manage
resource wastage
Network administration goals
Generally, network administration goals include:
 Maintain a resilient, high-quality network
 Plan and improve network capacity to enable seamless network access and operations
 Leverage networking tools for network systems administration and better network
administration control
 Track and document relevant changes
 Evaluate possible risks and orchestrate effective mitigations
 Prevent activities compromising or using the network as an attack vector
 Identify and mitigate intrusions to avoid security breaches
Network administration key areas.
Networks administration consists of five key areas:
1. Fault management: - Monitors the network infrastructure to identify and address
issues potentially affecting the network. It uses standard protocols such as Simple
Network Management Protocol (SNMP) to monitor network infrastructure.
2. Configuration management: - Tracks configuration and related changes of
network components, including switches, firewalls, hubs, and routers. As unplanned
changes can affect the network drastically and potentially cause downtime, it is essential to
streamline, track, and manage configuration changes.
3. Account management: - Tracks network utilization to bill and estimate the usage
of various departments of an organization. In smaller organizations, billing may be irrelevant.
However, monitoring utilization helps spot specific trends and inefficiencies.
4. Performance management: - Focuses on maintaining service levels needed for
efficient operations. It collects various metrics and analytical data to continually assess network
performance, including response times, packet loss, and link utilization.
5. Security management:- Aims to ensure only authorized activity and authenticated
devices and users can access the network. It employs several disciplines such as threat
management, intrusion detection, and firewall management. It also collects and analyzes
relevant network information to detect and block malicious or suspicious activity.
Network administrator tools and software
 Network administrators use various networking software and tools to optimally perform
network operations, including compliance, automation, configuration, real-time monitoring
and alerting, network inventory management, performance management, and vulnerability
assessment.
 network administrators can automate several tasks and focus on more value-adding tasks
needing their attention.
 Responsibilities of network administrator
• A network administrator focuses on the day-to-day aspects of managing and maintaining a
network.
The roles and responsibilities of network administrators are outlined
below.
 Is responsible for managing and maintaining the network in real time
 Ensures the network is secure by blocking suspicious activity and mitigating the risk of
security breaches
 Implements security programs based on hardware and software
 Manages on-site networking servers responsible for business operations
 Ensures network integrity and resilience to maintain service levels
 Tests the network to uncover weaknesses and mitigate them
 Monitors and tracks utilization
 Applies utilization, authentication, and authorization policies to maintain the quality and
security of the network
 Accounts and files privilege
 Applying account and file privileges involves configuring access controls to ensure that only
authorized users can access specific accounts and files.
Here are some steps to apply account and file privileges
effectively:
1. User Account Creation: Create user accounts for individuals who require access to
the system or files. Each user should have a unique username and password combination.
2. User Groups: Group users based on their roles and responsibilities. This simplifies
privilege management by assigning privileges to groups rather than individual users.
3. Principle of Least Privilege: Follow the principle of least privilege, which means
granting users the minimum level of privileges required to perform their job functions. Avoid
giving excessive permissions that could potentially lead to security vulnerabilities.
4. Access Control Lists (ACLs): Utilize access control lists to define access
permissions for files and directories.
5. File Ownership: Assign appropriate file ownership to ensure accountability and
control. Only authorized users or groups should own sensitive files or directories.
6. Regular Access Reviews: Perform regular access reviews to identify and
remove unnecessary or outdated privileges. This helps maintain a clean and secure access
control environment.
7. Password Policies: Enforce strong password policies to protect user accounts.
Require users to create passwords that meet complexity requirements (e.g., minimum length, a
combination of letters, numbers, and special characters) and encourage regular password
updates.
8. Regular Auditing and Monitoring: Implement logging and monitoring
mechanisms to track user activities, access attempts, and changes to account and file
privileges. Regularly review logs and audit trails to identify suspicious behavior and potential
security breaches.
9. Training and Awareness: Provide training and awareness programs to educate
users about the importance of account and file privilege management. Users should
understand their responsibilities in safeguarding sensitive data and be aware of best practices
for access control.
 Determine access privileges
 When a user tries to perform a privileged operation, the system checks the user's access token to determine
whether the user holds the necessary privileges1. If the user holds the necessary privileges, the system
checks whether the privileges are enabled.
 Access privileges can be viewed and modified in the Operations Server console .
The following primary roles can be subdivided into additional categories if
necessary to match your organization:
System Administrator: Responsible for configuring and maintaining the Operations Center
environment, including:
 Defining adapter connections to key components such as databases and remote management
systems
 Defining service model hierarchies, automations, and operations,
 Defining custom classes, behavior models, and property pages
 Defining calendars, schedules, and jobs
 Creating custom SQL Views
 Creating Layout views
 Determining which users should have access to specific element hierarchies
 Security Manager
Security Manager: Responsible for enforcing company security policies regarding
user access to the system, user identification and authorization, password rules, access
privileges, and so on. Also responsible for managing users and groups and enforcing
password policies and rules.
End Users: Responsible for analyzing and reporting information collected in Operations
Center from various sources. You should organize users who have similar authorization to
access data into groups, such as by job function or security clearance level.
 Access Control Privileges
View The user can view elements, as well as their alarms and properties, and relationships
to other elements that the user can view.
Manage The user can perform nonintrusive actions (such as Ping or TraceRoute) as well
as update element information (such as custom properties).
Access: The user can access remote managed elements by using “connect to” operations
with adapters that support cut-through telnet such as the Event Manager, OpenView, and
Netcool*. An example operation is using the Console capability in the Elements hierarchy.
Define :The user can perform administrative tasks such as adding scripts, sites, and
service model elements, as well as creating, deleting, and changing the definition of
adapters, service models and SLAs in Operations Center.
Undefined: Not defining access privileges avoids conflicts. For example, the two groups
in the following figure have the following permissions at the top (root) Access Control level
 The admins group has Define privileges explicitly defined. The users group has undefined
Define privileges. Therefore, a member of both groups has Define privileges.
 Maintain System integrity and security
System integrity
 System integrity refers to the state of a computer system or network being complete,
accurate, and secure. It involves ensuring that the system operates as intended, without
unauthorized modifications, corruption, or compromise. System integrity encompasses
various aspects, including data integrity, configuration integrity, and overall security.
 Data Integrity: Data integrity refers to the accuracy, consistency, and reliability of
data stored within a system. It ensures that data remains unchanged and uncorrupted
throughout its lifecycle. Measures such as data validation, checksums, and error detection
techniques are used to maintain data integrity.
Configuration Integrity: Configuration integrity involves verifying and
maintaining the integrity of system configurations, settings, and parameters.
 It ensures that the system is properly configured according to established standards and best
practices. Unauthorized changes to system configurations can introduce vulnerabilities or
disrupt system functionality.
Software Integrity: Software integrity focuses on ensuring that software applications
and programs are free from defects, vulnerabilities, or unauthorized modifications. It involves
implementing secure coding practices, performing regular software updates and patching, and
conducting code reviews and software testing to identify and fix vulnerabilities.
Hardware Integrity: Hardware integrity refers to the assurance that computer hardware
components are functioning correctly and have not been tampered with or compromised. It
involves validating the authenticity and integrity of hardware components, monitoring for
hardware failures, and protecting against unauthorized modifications or hardware-based attacks.
System Security: System security is a critical aspect of system integrity. It involves
protecting the system against unauthorized access, data breaches, malware, and other security
threats. This includes implementing access controls, strong authentication mechanisms,
encryption, intrusion detection and prevention systems, and ongoing monitoring and auditing of
system activities.
 Maintaining system integrity is essential to ensure the reliability, availability, and confidentiality
of information, as well as the proper functioning of computer systems and networks. It requires a
combination of technical controls, security measures, and proactive monitoring to prevent
unauthorized changes, detect potential vulnerabilities, and respond promptly to security incidents.
 System integrity management
 System security
 The security of a computer system is a crucial task. It is a process of ensuring the
confidentiality and integrity of the OS. Security is one of most important as well as the major
task in order to keep all the threats or other malicious tasks or attacks or program away from
the computer’s software system.
 A system is said to be secure if its resources are used and accessed as intended under all the
circumstances, but no system can guarantee absolute security from several of various
malicious threats and unauthorized access.
The security of a system can be threatened via two violations:
 Threat: A program that has the potential to cause serious damage to the system.
 Attack: An attempt to break security and make unauthorized use of an asset.
 Security violations affecting the system can be categorized as malicious and accidental
threats. Malicious threats, as the name suggests are a kind of harmful computer code or web
script designed to create system vulnerabilities leading to back doors and security breaches.
Accidental Threats, on the other hand, are comparatively easier to be protected against.
Network security
 Self-check - 1
Part I:- Say True if the given statement is correct else say False
1. When determining access privileges in a network system, factors such as user's physical
location and job title should be considered.
2. Granting all users the highest level of access possible is a recommended approach for
determining access privileges.
3. Storing sensitive data in plain text files is a secure practice for maintaining system integrity
and security.
Part II: - Select the appropriate answer from the given alternative
1. When referring to accounts and files privilege in network system administration, what does
the term "privilege escalation" mean?
A. Granting additional permissions to a user
B. Revoking all access privileges from a user
C. Assigning a new username to a user
D. Changing the file ownership to a different user
2. In the context of determining access privileges, what is the principle of "least privilege"?
A. Granting users the highest level of access possible
B. Assigning access privileges based on job titles
C. Limiting user access to only the resources necessary for their tasks
D. Providing all users with equal access privileges
3. Which of the following is an example of a multifactor authentication method for
determining access privileges?
A. Using a username and password combination
B. Requiring a fingerprint scan and a password
C. Granting access based solely on IP address
D. Sharing a single password among multiple users
4. What is the purpose of implementing intrusion detection systems (IDS) in network system
administration?
A. To prevent unauthorized access to the system
B. To monitor network traffic and detect potential security breaches
C. To encrypt sensitive data during transmission
D. To manage user accounts and access privileges
5. Which of the following is an example of a security measure for maintaining system integrity
and security?
A. Regularly updating antivirus software
B. Sharing passwords with coworkers for convenience
C. Allowing unrestricted remote access to the system
D. Storing sensitive data in plain text files
 Part II: - Give short answer
1. What are the responsibilities of system administrator?
2. Demonstrate the difference between system security and system integrity with example?
3. List and explain Network administration key areas?
 Unit Two: Disseminate disaster recovery plan
 A Disaster Recovery Plan (DRP) is a structured approach to responding to and recovering
from events that can cause data loss, system downtime, and other disruptions to normal
business operations.
 Modern organizations have to operate on a 24/7 basis in order to stay competitive in the
market. It is important to create a disaster recovery (DR) plan so as to ensure that your
business can continue to operate even during a DR event. However, when designing a DR
plan, many businesses overlook the importance of network disaster recovery.
 A network disaster recovery plan includes a set of procedures required to effectively
respond to a disaster that affects a network and causes its disruption. Network disaster
recovery planning generally entails:
Listing the steps which should be undertaken in order to restore network connectivity
Identifying people responsible for conducting network disaster recovery
Assessing possible consequences of a network failure
Determining the best strategies to mitigate them
 Possible Causes of Network Failures
 Network services are required for ensuring an uninterrupted flow of communications and data
transfer within your IT infrastructure. Various factors can lead to network failure. These
include:
 Hardware failure. Network equipment such as routers, switches, modems, gateways, or any
other device can fail and, as a result, affect the performance of all other devices connected to
them.
 Cascading failure. A single network consists of multiple routers, nodes, or switches. One of
those network components might become overloaded and stop working, which can trigger a
cascade of failures within a single network.
 Issues with the internet connection. Failure to set up an internet connection can cause
problems with network connectivity and interrupt data transfer.
 Human errors. Sometimes, network connectivity problems might be the result of mistakes
made by employees when working with network equipment or manually configuring network
components.
 Network attacks. Network services can get disrupted after a cyber-attack,
whose aim is to prevent the organization from delivering its services, forcing it
to shut down.
 Natural or man-made disaster. Disasters of any type can significantly
damage or even destroy your production center and virtual infrastructure, thus
causing significant business losses.

Tips for Disaster Recovery Planning

 Backup and restore
Backup for disaster recovery
 Backup is a crucial element of disaster recovery, providing a means to safeguard critical data,
applications, and systems in case of unforeseen events. It involves creating duplicate copies
of essential information and storing them on separate devices or off-site locations. These
backups are performed regularly to capture the most up-to-date data and ensure its
availability for recovery purposes.
 There are several types of backups that can be employed, each offering different levels of
data protection and recovery options.
 Some common types of backups include:
1. Full Backup: A full backup involves creating a complete copy of all data and files in a
system or storage device. It captures all data, regardless of whether it has changed since the last
backup. Full backups are comprehensive but can be time-consuming and require significant
storage space.
• Full Backup

2. Incremental Backup: Incremental backups only capture and store changes made
since the last backup, whether it was a full or incremental backup. This approach is more
efficient in terms of time and storage space, as it only backs up the modified or new data.
However, recovery from incremental backups may require multiple backup sets to be
restored.
3. Differential Backup: Differential backups capture all changes made since the last
full backup. Unlike incremental backups, which only include changes since the last backup
(whether full or incremental), differential backups include changes since the last full backup.
This results in faster recovery compared to incremental backups, as only the last full backup and
the differential backup need to be restored.

4. Mirror Backup: A mirror backup creates an exact replica of the source data or system. It
involves copying all files and directories to a separate storage device or location. Mirror
backups provide a straightforward recovery process, as the backup is a direct copy of the
original data. However, they can consume significant storage space and may not offer
versioning or point-in-time recovery capabilities
5. Snapshot Backup: Snapshot backups capture the state of a system or data at a
specific point in time. Instead of copying all data, snapshot backups store the differences or
changes made since the previous snapshot.

6. Cloud Backup: Cloud backup involves storing data backups in off-site cloud storage.
It offers the advantage of scalability, accessibility from anywhere with an internet connection,
and built-in redundancy provided by the cloud service provider. Cloud backups can be
performed using various backup methods, such as full, incremental, or snapshot backups.
 Restore for disaster recovery
• The restore phase is a key component of the overall disaster recovery plan and involves the
following:
Assess the situation: Before initiating the restore process, assess the extent of the damage caused by
the disaster and determine the scope of the restoration effort. Identify the affected systems,
applications, and data that need to be restored.
Activate the disaster recovery plan: Refer to the documented disaster recovery plan, which should
outline the procedures and guidelines for restoring various components of the IT infrastructure.
Follow the plan's instructions to ensure a structured and organized approach to the restore process.
Retrieve backups: Retrieve the backup copies of the affected data, applications, or systems
from the designated backup storage location. This may involve accessing backup tapes, disk-
based backups, or cloud-based backups depending on the backup strategy and technology in
place.
Validate backup integrity: Verify the integrity and consistency of the backup data before
proceeding with the restore process. This step ensures that the backups are viable and can be
relied upon for successful recovery.
Restore data and applications: Start the restoration of data and applications based on the
recovery priorities defined in the disaster recovery plan. Begin with the most critical
systems and work your way down to less critical ones.
Test and verify: After the restore process, conduct thorough testing to validate the restored
data, applications, and systems. Perform functional tests, check for data integrity, and ensure
that the restored components are working correctly.
Update configurations and connections: Adjust configurations and re-establish
connections as necessary to integrate the restored systems back into the production
environment.
Document the restore process: Maintain detailed documentation of the restore process,
including the steps performed, any issues encountered, and the actions taken to resolve
them.
 Self-check - 2
Part I:- Say True if the given statement is correct else say False
1. A disaster recovery plan (DRP) only focuses on recovering data and does not address
other aspects of business operations.
2. Backup and restore processes are only necessary for natural disasters and do not apply to
other types of disruptions.
3. Having a backup solution in place guarantees instant recovery of data and systems in the
event of a disaster.
4. Data backup and replication are interchangeable terms, representing the same process.
 Part II: - Select the appropriate answer from the given alternative

1. What is the primary goal of a disaster recovery plan (DRP)?

A. Preventing disasters from occurring
B. Minimizing the impact of disasters on business operations
C. Recovering data and systems instantly after a disaster
D. Eliminating the need for regular backups
2. What is the purpose of conducting a business impact analysis (BIA) in the context of a
disaster recovery plan?
A. Identifying critical business functions and their dependencies
B. Assessing the likelihood of specific disaster events occurring
C. Implementing cyber security measures to prevent data breaches
D. Evaluating the effectiveness of backup and restore processes
3. Which of the following is an example of an off-site backup location?
A. An external hard drive connected to the same server
B. A cloud storage service hosted by a third-party provider
C. shared network folder on the same local network
D. An additional internal hard drive within the same computer
 4. What does the term "recovery point objective" (RPO) refer to in backup and restore?
A. The maximum tolerable downtime after a disaster
B. The amount of data that can be recovered within a specific timeframe
C. The point in time to which data can be restored after a disaster
D. The frequency at which backups are performed
5. Which of the following is a common backup strategy for ensuring redundancy and data
availability?
A. Full backup performed daily
B. Incremental backup performed weekly
C. Differential backup performed monthly
D. Snapshot backup performed hourly
Part II: - Give short answer
1. List and explain types of backups?
2. Demonstrate the main purpose of network disaster recovery in large and small
organization?
3. Demonstrate disaster restore phase?
 Unit Three : Monitor network performance
• Basic concept of monitor network performance
 Monitoring network performance involves the systematic observation and analysis of a
computer network to ensure it operates efficiently, reliably, and securely.
 This process encompasses various aspects such as bandwidth utilization, latency, packet
loss, and device health.
 By continually assessing these factors, network administrators can identify and address
potential issues before they impact the user experience.
 Bandwidth monitoring helps optimize data transmission capacity, latency monitoring
ensures timely data delivery, and packet loss monitoring aids in maintaining a stable and
responsive network.
 Additionally, network performance monitoring includes traffic analysis, security
surveillance, and quality of service assessments to ensure that resources are allocated
effectively, potential security threats are detected, and the overall quality of communication
meets the desired standards.
 Utilizing specialized tools and reporting mechanisms, organizations can maintain a proactive
approach to network management, enhancing the overall reliability and performance of their network
infrastructure.
 Performing diagnostic test
 Performing network diagnostic tests involves a systematic process to assess and analyze the health,
performance, and functionality of a computer network. Here are the general steps you can follow to
conduct network diagnostic tests:
Identify the Issue:
 Begin by identifying the specific issue or symptoms that require diagnostic testing. This could
include slow network performance, connectivity problems, or unexpected outages.
Define Testing Objectives:
 Clearly define the objectives of your diagnostic tests. Determine what aspects of the network you
need to evaluate, such as bandwidth, latency, packet loss, or device health.
Select Appropriate Tools:
Choose the appropriate network diagnostic tools for the specific tests you want to
perform. There are various tools available for different aspects of network analysis,
including:
Ping and Traceroute: For assessing connectivity and latency.
 Network Performance Monitoring Tools: Such as Wireshark, Nagios, or PRTG for detailed analysis
of network traffic.
Bandwidth Testing Tools: Like Speedtest.net or iPerf for measuring available bandwidth.
Device Monitoring Software: To assess the health and performance of network devices.
Execute Diagnostic Tests:
 Perform the selected diagnostic tests. For example:
 Use ping to check connectivity and measure round-trip times.
 Conduct traceroute to identify the path and latency between your computer and a destination.
 Run bandwidth tests to evaluate the network's capacity.
 Utilize network monitoring tools to analyze traffic patterns and identify potential issues.
Interpret Results:
 Analyze the results of the diagnostic tests. Look for anomalies, deviations from expected
values, or patterns that may indicate network issues. Pay attention to any packet loss,
latency spikes, or irregularities in traffic.
Diagnose Network Issues:
 Based on the results, diagnose the root causes of identified network issues. This may
involve troubleshooting hardware, configuration settings, or addressing issues related to
network congestion.
Implement Solutions:
 Once the issues are identified, implement appropriate solutions. This could include
adjusting network configurations, upgrading hardware, optimizing settings, or addressing
specific issues with network devices.
Document and Report:
 Document the results of your diagnostic tests and the actions taken to address any issues.
This documentation is valuable for future reference and can help in maintaining a
proactive approach to network management.
Continuous Monitoring:
 Establish a routine for continuous monitoring of the network. Regularly perform
diagnostic tests to identify and address potential issues before they impact network
performance.

Analyze and respond information

 Analyzing and responding to information in a network involves monitoring network traffic,
identifying potential issues or anomalies, and taking appropriate actions to ensure network
security, performance, and reliability. Here are some ways of analyze and respond to
. Here are some ways of analyze and respond to information in a network:
1. Implement network-monitoring tools: Use network monitoring software or tools to capture
and analyze network traffic. These tools can provide real-time visibility into network activity,
including bandwidth utilization, packet loss, latency, and security events.
2. Establish baseline and thresholds: Establish a baseline of normal network behavior by
monitoring network traffic patterns over time. Set thresholds or alerts for abnormal network
behavior, such as unusually high traffic volume, network congestion, or security breaches.
3. Monitor network traffic: Continuously monitor network traffic to identify any anomalies or
deviations from the baseline. Observe patterns, trends, and irregularities that may indicate
network performance issues or security incidents.
4. Analyze network logs: Analyze log files generated by network devices, servers, and security
systems. Logs can provide valuable information about network events, errors, and security
incidents. Look for any suspicious or unusual activities that may require investigation or
response.
5. Identify security threats: Use intrusion detection and prevention systems (IDS/IPS) or
security information and event management (SIEM) solutions to detect and respond to security
threats. Analyze network traffic for signs of malware infections, unauthorized access attempts,
or other malicious activities.
6. Investigate network issues: When an issue or anomaly is detected, investigate the root cause
by analyzing relevant network logs, traffic patterns, and system configurations. Identify the
source of the problem, whether it's a misconfiguration, hardware failure, software bug, or
security incident.
7. Respond to network incidents: Take appropriate actions to address network incidents or
issues. This may involve implementing security measures, such as blocking malicious IP
addresses or isolating compromised devices. Troubleshoot network performance problems and
apply necessary fixes or optimizations.
8.Document and report: Keep detailed records of network incidents, actions taken, and their
outcomes. Document any changes made to network configurations or security settings. Prepare
reports summarizing network performance, security incidents, and actions taken for
management and future reference.
9. Continuous improvement: Regularly review and update network monitoring and response
strategies based on lessons learned from past incidents. Stay updated with emerging threats,
new technologies, and best practices in network monitoring and security.
 Monitor software and files
 To monitor software and files using a network, you can employ various network monitoring
techniques and tools. Here are some steps to monitor software and files using a network.
 Choose network-monitoring tools: Select network monitoring software or tools that offer
features for monitoring software and file activities. Look for tools that provide real-time
monitoring, alerting, and reporting capabilities specific to software and file monitoring.
 Install monitoring agents or software: Install monitoring agents or software on the
systems or servers where the software and files are located. These agents will collect data
and send it to the central monitoring system for analysis.
 Set up file integrity monitoring: Implement file integrity monitoring (FIM) to detect
unauthorized changes to files. FIM tools can monitor file attributes, checksums, or digital
signatures to ensure the integrity and security of critical files. Any unauthorized
modifications can trigger an alert.
 Monitor network traffic: Utilize network-monitoring tools to capture and analyze network
traffic that is related to software and file activities. This can help identify any unusual or
unauthorized network connections, file transfers, or software downloads.
 Enable logging and auditing: Enable logging and auditing features on servers and systems
hosting the software and files. Configure the logging settings to capture relevant information
about software installations, file accesses, modifications, and user activities. Regularly
review the logs for any suspicious or unauthorized activities.
 Configure alerts and notifications: Set up alerts and notifications within the network
monitoring tools to inform you of any abnormal software or file-related activities. Configure
the alerts to be sent via email, SMS, or other communication channels, ensuring that the
right individuals or teams are notified promptly.
 Perform regular analysis and reporting: Regularly analyze the collected data, generate
reports on software, and file activities. Look for patterns, trends, or anomalies that may
indicate security risks, compliance violations, or performance issues. Share these reports
with relevant stakeholders for visibility and informed decision-making.
 Maintain patch management and vulnerability scanning: Regularly apply software
patches and updates to address known vulnerabilities. Conduct vulnerability scans to
identify any weaknesses in software or files that could be exploited by attackers. Monitor
the results of patching and vulnerability scanning activities to ensure compliance and
mitigate risks.
 Continuously review and refine monitoring strategies: Review your monitoring strategies
and tools periodically to ensure they remain effective and aligned with your organization's
evolving needs. Stay informed about emerging threats, new monitoring technologies, and best
practices in software and file monitoring to enhance your monitoring capabilities.
 Monitor performance indicators
 Monitoring the performance indicators of a network is essential to ensure its optimal
functionality. To monitor network performance, start by identifying relevant performance
indicators such as bandwidth utilization, latency, packet loss, network throughput, and
response times. Next, select network monitoring tools that can collect and analyze data on
these indicators. Deploy monitoring agents or sensors on critical network devices and
configure real-time monitoring to continuously track performance metrics. Set up performance
thresholds and alerts to receive notifications when indicators exceed or fall below acceptable
levels. Analyze historical data to identify trends and patterns, and periodically conduct
performance assessments. Utilize network traffic analysis tools to examine traffic patterns and
generate performance
 Improve network and systems
 Improving network and systems involves implementing strategies to enhance performance,
 A step to enhance your network performance can enhance your overall productivity and
business continuity.
1. Reconfigure Your Network
 Your network configuration can affect performance. For instance, if you install an update and
it doesn't configure your devices, this can have a large impact on your performance. A good
example is the personal area network devices that should not be more than 10 meters apart.
2. Check for System Defects And Viruses
 Viruses and system defects can break down a network infrastructure and degrade the network
performance. Some malwares can also control programs and applications in your network. A
flaw in the components or system can cause a network to behave unexpectedly.
3. Upgrade and Update Firmware and Software
 Often, businesses cannot keep up with the pace of technology and balance with the software
they run. You may end up having software running on outdated technology in your network.
You can also have old machines with new programs.
4. Use Virtual Local Area Networks (VLANs)
 VLANs reduce broadcast traffic, ease administration and confine broadcast domains. You
can use the technology to segment your network resources such that critical areas are given
the highest priority. With VLANs, you can separate or partition the network without rewiring
the entire office.
 VLANs also play a vital role in enhancing security. Splitting network components and
prioritizing tasks in the network can create room for performance optimization.
5. Provide a Guest Network
 Having multiple users on a network increases traffic, which affects network performance.
An enterprise network accommodating hundreds of guest users is bound to experience
slowdowns. Guests can demand bandwidth that your business would otherwise be using on
other important tasks.
6. User Education
 Educating your team on user behavior can enhance network performance. Often, employees
use their free time on their computers. They could choose to stream a show or play video
games, unaware of the impact of the activities on the network resources.
7. Network Monitoring:- Monitoring your network for traffic jams and bottlenecks can
help you diagnose problems, solve them in good time, and prevent advancing network issues.
For instance, if the network admin identifies backups as the reason behind substandard
network performance, they can schedule them for a time when the personnel are not utilizing
most of the network resources.
Self-check - 3
Part I:- Say True if the given statement is correct else say False
1. Performing diagnostic tests involves analyzing and responding to information.
2. Monitoring software and files is not a part of the diagnostic testing process.
3. Diagnostic testing does not involve monitoring performance indicators.
• Part II: - Select the appropriate answer from the given alternative
1. What is the purpose of analyzing and responding to information in network administration?
a) Improving network aesthetics
a) Monitoring software license usage
b) Identifying performance bottlenecks
c) Ensuring physical security measures
2. which of the following is a common performance indicator monitored in network administration.
b) Keyboard typing speed
c) Server room temperature
d) File compression ratio
e) Network bandwidth utilization
3. How does improving network and systems contribute to network administration?
a) Increasing software licensing costs
b) Enhancing data backup and recovery
c) Monitoring physical server dimensions
d) Optimizing network configurations
4. How does improving network and systems contribute to network
administration?
e) Monitoring office supply inventory
f) Increasing software licensing compliance
g) Enhancing network security measures
h) Optimizing printer paper tray configurations
• Part III: - Give short answer
1) List and explain ways of analyze and respond to information in a network?
2) Demonstrate the way of improve network and systems?
3) Demonstrate the technic of monitor software and files using a network?
 Unit Four : Migrate to New Technology
 Basic concept of Migrating to new technology
 Migrating to new technology involves the strategic transition from existing technological
systems to advanced solutions.
Develop new skills.
 Developing new skills in new technology requires a systematic approach and a
commitment to continuous learning.
Here are steps to help you develop new skills in emerging technologies:
1. Identify the technology: Start by identifying the specific technology or field you
want to develop skills in.
2. Set clear goals: Define your learning goals and objectives. Determine what specific
skills, knowledge, or certifications you want to acquire in the new technology.
3. Assess existing skills: Evaluate your existing skills and knowledge related to the
technology.
4. Select learning resources: Identify high-quality learning resources that
suit your preferred learning style. These resources may include online courses, tutorials,
books, video lectures, forums, or workshops.
5. Create a learning plan: Develop a learning plan that outlines the topics, concepts,
and skills you need to cover. Break down the learning process into manageable chunks and set
a schedule or timeline for your learning activities.
6. Embrace continuous learning: Technology evolves rapidly, so commit to
continuous learning. Stay curious, explore new developments, and keep up with industry
news and updates. Dedicate time regularly to learn and stay updated on advancements in the
technology you're focusing on.
 Upgraded technology skills
 Upgrading technology skills is an ongoing process that requires dedication, perseverance,
and a commitment to lifelong learning. Embrace new challenges, be proactive in seeking
opportunities, and apply your upgraded skills in practical settings to maximize their impact.
 To upgrade your technology skills, you can follow these one:
Identify Areas for Improvement:
Set Clear Goals
Create a Learning Plan:
Engage in Practical Projects:
Stay Updated and Practice Continuously
Seek Feedback and Networking
Identify upgraded equipment.
 Upgraded equipment refers to the improved or advanced versions of technological devices or
tools used in various domains. It involves the enhancement of hardware components, software
capabilities, performance, features, or functionalities of a specific piece of equipment. Upgrades
can include improvements in processing power, memory capacity, storage capacity, connectivity
options, display quality, battery life, security features, or any other aspect that enhances the
overall performance or user experience of the equipment. Upgraded equipment often incorporates
the latest technological advancements and innovations to deliver superior performance, increased
efficiency, and enhanced capabilities compared to previous versions or older models .
 Computers:
 High-performance desktop computers with advanced processors, increased RAM, and faster
storage options like solid-state drives (SSDs)
 Laptops with improved battery life, higher screen resolutions, and enhanced graphics
capabilities.
 Workstations designed for intensive tasks such as video editing, 3D rendering, or
scientificsimulations, featuring powerful processors, ample RAM, and dedicated graphics
cards. .
 Smartphones:
 Flagship smartphones with faster processors, larger RAM capacity, and improved
camera technologies.
 Devices with 5G connectivity for faster internet speeds and lower latency.
 Smartphones equipped with advanced biometric authentication methods like facial
recognition or under-display fingerprint sensors.
 Networking:
 Upgraded routers with the latest Wi-Fi standards (such as Wi-Fi 6 or Wi-Fi 6E) offering
faster speeds and better network performance.
 Network switches with higher port densities, increased bandwidth, and support for
advanced features like Power over Ethernet (PoE) or Quality of Service (QoS).
 Firewall appliances with enhanced security capabilities, such as intrusion prevention
systems (IPS), deep packet inspection (DPI), or advanced threat protection (ATP).
 Cameras and Photography:
 Digital cameras with higher megapixel counts, improved low-light performance, and
advanced autofocus systems.
 Mirror less cameras with faster burst shooting rates, improved image stabilization, and
high-resolution electronic viewfinders.
 Drones equipped with high-resolution cameras, obstacle avoidance sensors, and
intelligent flight modes for aerial photography and videography.
Virtual Reality (VR) and Augmented Reality (AR):
 VR headsets with higher display resolutions, wider field of view, and improved tracking
accuracy.
 AR glasses with lightweight designs, better transparent display technology, and enhanced
gesture recognition.
 Controllers and haptic devices that provide more precise and immersive interactions
within virtual environments.
 Understand Sources of information for new or upgraded equipment

1. Manufacturer Websites: The official websites of equipment manufacturers provide

comprehensive and accurate information about their products. These websites often include
detailed specifications, features, pricing, and availability of the latest models or upgrades.
2. Technology News Websites: Websites that specialize in technology news and
reviews, such as CNET, Engadget, The Verge, PCMag, and Gizmodo, offer up-to-date coverage
on new and upgraded equipment. They provide in-depth articles, reviews, comparisons, and
expert insights into the latest technology trends and advancements.
3. Industry-specific Publications: Industry publications and magazines dedicated
to specific fields or sectors often feature articles and reviews about new or upgraded equipment.
Examples include Wired, Popular Science, IEEE Spectrum, or Automotive News, depending on
your area of interest.
4. Online Forums and Communities: Online forums and communities
focused on specific equipment or technology domains are valuable sources of
information. Platforms like Reddit, specialized forums, or dedicated Facebook groups
allow users to discuss, share experiences, and ask questions about new or upgraded
equipment.
5. Professional Networks and Colleagues: Networking with professionals in
your industry or field can provide valuable insights into new or upgraded equipment.
Engaging with colleagues, attending industry events, or joining professional organizations can
help you tap into their expertise and firsthand experiences with the equipment you are
interested in.
Use new or upgraded equipment
 When organizations want to make a significant change to their business systems, new
technology or new equipment is generally part of the change. Using new or upgraded
equipment typically involves several steps to ensure a smooth and efficient transition.
 Here is a general guide:

Read the Manual:- Start by thoroughly reading the user manual or any
accompanying documentation that comes with the equipment. This will provide you with a
detailed understanding of its features, functionalities, and proper usage.
Familiarize Yourself: Take some time to get familiar with the equipment. Explore
its buttons, controls, and settings. Understand how to power it on/off, adjust settings, and
navigate through different menus or options.
Practice Hands-On: Engage in hands-on practice with the equipment. Start with
simple tasks or basic functions to gain confidence and gradually progress to more complex
operations. Experiment with different settings and features to understand their impact and
functionality.
Seek Training or Tutorials: If available, attend training sessions or workshops
related to the equipment. Alternatively, search for online tutorials, video guides, or forums
where you can learn from others' experiences and expertise.
Troubleshooting and Maintenance: Familiarize yourself with common
troubleshooting techniques specific to the equipment. Learn how to identify and resolve
common issues that may arise during usage.
Troubleshooting and Maintenance
 Self-check - 4
Part I: - Say True if the given statement is correct else say False
1) Upgrading technology skills involves identifying upgraded equipment.
2) Understanding sources of information for new or upgraded equipment is necessary when
upgrading technology skills.
3) Using new or upgraded equipment is not important in the process of upgrading technology
skills.
• Part II: - Select the appropriate answer from the given alternative
1. Which of the following is a benefit of identifying upgraded equipment when upgrading
technology skills?
A. It improves physical fitness
B. It enhances problem-solving abilities
C. It boosts creativity in art and design
D. It promotes healthy eating habits
2. How does using new or upgraded equipment contribute to upgrading
technology skills?
A. It improves social interaction skills
B. It enhances critical thinking abilities
C. It promotes physical well-being
D. It develops musical talent
3. Which of the following is an example of upgraded equipment in the context of
upgrading technology skills?
A. Pencil and paper B. Typewrite C. Smartphone D. AbacusS
4. Which of the following is a direct outcome of upgrading technology skills?
A. Building a sandcastle B. Solving complex technological problems
C. Writing poetry D. Playing sports
 Part III: - Give short answer
1. List and explain Sources of information for new or upgraded equipment?
2. Demonstrate the way of develop new skills in emerging technologies?
3. List and explain upgraded equipment in ICT?