C-Data Training Courses - GPON OLT Basic Operation
C-Data Training Courses - GPON OLT Basic Operation
OLT default is support auto authentication , ONU auto bind ont-lineprofile 0 and ont-srvprofile 0.
Need enable PON port the manual auth mode first.The auto find function also need enable.
On the autofind list can see the ONU find on the OLT side.
Manual add and authentication ONU and config the ONU bing to which line profile and service profile.
On the device manager page can see the ONU online status and configuration status.
If the ONU profile can not meet your requirement,you can manual change the ONU profile.
In the policy profile add a VLAN,and config the uplink and pon port to the vlan for the service.
Give the name for the policy profile, select onu line-profile and service-profile bind to the policy.If the
profile not meet your requirement,can click the manage button to edit the profile and add a new profile.
Take the policy profile apply to which PON port,and config the ONU matching-rules.
When a new ONU online on the OLT side,the ONU can auto apply the policy profile.On the ONU device
manager page can see the ONU used which policy profile.
When manual add the ONU,we also can take the ONU used which policy profile or line-profile or service-
profile.
LACP is can combined collection of physical ports,it is can increased bandwidth and dynamic link backup.
Add the LACP group on the OLT side,select which uplink port in the LACP group and config the vlan for the
LACP group.
On this page can see which port is in the lacp group and can see the link status.If the link status show the
down,this need to check other side device if enable the lacp function.
OLT the loop-detection function is used for detect the loop from the uplink port and pon port,the
configuration is like below picture
This is show how to enable OLT the PON port loop detection function and config the action to trap.
Trap means the OLT detect the loop just send the alarm to the OLT,not to do the action.
When the OLT detect the loop from the ONU side,the OLT will show the alarm and mention which ONU and
the ONU which lan port the loop.
This is show how to enable OLT the PON port loop detection function and config the action to shutdown.
Shutdown means the OLT detect the loop will take the PON port disable.
When the OLT detect the loop from the ONU side,the OLT will show the alarm and the take PON port
shutdown,below picture you can see the PON port is auto disable and the ONU are offline.
Before config the OLT port vlan,need create global vlan to the OLT first,then can choice which uplink port
add to this vlan. After global vlan created,OLT all the PON port is auto add to the vlan,no need manual
config.
SHENZHEN C-DATA Technology Co., Ltd
Accessing the World with Cloud-Data
OLT Global VLAN Create-2
On this page can see the OLT the vlan information and the port vlan bind information.
On this page can config the port to the vlan,and can config the port the vlan mode.Naitve vlan is give to the
untag packet used.
Thank you !
(86)755-26014509
www.cdatatec.com