Scribd
Upload
7 views

Digital Communication

Uploaded by

22u211
Copyright
© © All Rights Reserved
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
7 views

Digital Communication

Uploaded by

22u211
Copyright
© © All Rights Reserved
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
You are on page 1/ 12

Al-Israa University College

Computer Techniques Engineering Department

Digital Communication
Chapter 5 part (1)

Digital Pulse Modulation

BY
Assist. Lec. Karrar S. Faraj
Types of Modulation
Pulse Code Modulation (PCM)
Most current digital audio systems (computers, compact discs, digital telephony etc.) use multi-bit Pulse
Code Modulation (PCM) to represent the sound signal. Analog to PCM conversion consists of three steps:
Sampling, Quantizing and Encoding.

Block Diagram of PCM system


PCM Transmitter

PCM Receiver
Pulse Code Modulation (PCM)
PCM Advantages and Disadvantages

• Advantages of PCM:
1- Low channel noise and interference.
2- Easy multiplexing of various PCM signals.

• Disadvantages of PCM:
1- Complex systems.
2- Wide bandwidth is required.
Q (1):- A compact dis (CD) records audio signals digitally by using PCM. Assume the audio signal 15KHz.

1- What is the Nyquist rate.


2- If the samples are quantized into L = 65536 levels and then binary coded, determine the number of
binary digits required to encoded a sample.
3- Determine the number of binary digits per second (bit rate).
Solution:-
1-

2-
=

3-
b/s
Q (2):- A television has band limited 4.5 MHz. This signal is sampled, quantized and binary coded to obtain
a PCM signal.
1- Determine the sample rate if the signal is to be sampled at a rate 20% above the Nyquist rate .
2- If the samples are quantized into L = 1024 levels and then binary coded, determine the number of
binary digits required to encoded a sample.
3- Determine the number of binary digits per second (bit rate) and the minimum bandwidth required to
transmit this signal.
Solution:-
1- = 2* 4.5 M = 9 MHz
3-
b/s
=1.8 MHz
≥
= 9 M + 1.8 M =10.8 MHz
≥
≥ 54 MHz
2-
=
Q (3):- Five telemetry signals, each of bandwidth 1KHz, are to be transmitted by binary PCM. The
maximum error in sample amplitude is 0.2% of the peak signal amplitude. This signal must be sampled
rate at least 20% above the Nyquist rate. Determine the minimum possible data rate that must be
transmitted (for both PCM and TDM) and the minimum bandwidth required to transmit this signal.
Solution:-
=5 signals
f = 1 KHz

&

= 8 * 2.4 K = 19.2 K b/s


= 2* 1 K = 2 KHz ≥ ≥ ≥ 9.6 KHz

=0.4 KHz
= 2 K + 0.4 K =2.4 KHz
Q (4):- Ten telemetry signals, each of bandwidth 100Hz, are to be transmitted by binary PCM. This
signal are sampled, quantized, binary coded and then time-division multiplexer. The maximum error in
sample amplitude is 0.5% of the peak signal amplitude. This signal rate must be sampled at least twice
the Nyquist rate. Determine the minimum possible data rate that must be transmitted and the minimum
bandwidth required to transmit this signal (for both PCM and TDM).
Solution:- =10 signals
f = 100 Hz

= 7* 400= 2800 b/s


≥ ≥ ≥ 1400 Hz
= 2* 100 = 200 Hz

= 400 Hz ≥ N*≥ 10* 100≥ 1 KHz


Q (5):- A signal x(t) band-limited to 3 KHz is sampled using PCM system. The signal power is 50 mW
and uses a 8-levels quantization. This signal rate must be sampled at least twice the Nyquist rate. Find
channel capacity?
f = 3 KHz
Solution:-
= L=8

= 2* 3 K = 6 KHz
= 50 m =
= 12 KHz = 800 m
R = = 0.9

==

= 3* 12 K= 36 K b/s
≥ ≥ ≥ 18 KHz
C = 18 K
C = 100.74 K b/s
Thank
You

You might also like