VISVESVARAYA TECHNOLOGICAL UNIVERSITY

BELGAUM-590014
SIR M VISVESVARAYA INSTITUTE OF TECHNOLOGY
DEPARTMENT OF CIVIL ENGINEERING
INTERNSHIP/PROFESSIONAL PRACTICE
18CVI85
BY
ABDUL KALAM S - 1MV21CV400
AJAY G NAIK - 1MV21CV402
AMZAD PASHA C - 1MV21CV403
SYED SHAAHID - 1MV21CV425
INTERNSHIP CARRIED OUT
AT
SATTVA AEROPOLIS (BANGALORE)
1 ON
“BUILDING CONSTRUCTION TECHNOLOGY”

Under the guidance of

Dr RAVI KUMAR H
Associate Professor & HOD, Civil department
Sir MVIT, Bengaluru
2
• This is the presentation on our Internship Experience at
SATTVA AEROPOLIS (BANGALORE) on "BUILDING
CONSTRUCTION TECHNOLOGY”

• In this internship ,we got an opportunity to gain the

knowledge on organization, role and responsibility, quality
assurance and quality check, work sequence format.

• We particularly learned more on foundation, retaining wall

and excavation etc.
3
About the organization

SATTVA AEROPOLIS –
Head office in Bangalore is the one of India’s leading property development,
Management and consulting organizations. Founded in 1986.With a humble
beginning in Bangalore in 1993, with 3 decades of unwavering commitment to
quality construction across 7 cities in India ISO 9001- 2008, ISO 14001
&OHSAS 18001 certified company; it was incorporated in 1986 by MR. Bijay
Agarwal, Managing director of the company. Salarpuria sattva is one of the
Management and consulting organization company in India with projects being
executed in Hyderabad, Karnataka,

4
WEEK 1-2

5
Introduction to;

• PROJECT INFORMATION – general

• LAYOUT OF SITE
• Inspections of Block – phase 1&2

6
PROJECT INFORMATION
Project type Residential project

Region Boovnahalli , Bangalore

Address of the project Site KIAL Airport, Devanahalli Bangalore

Business Segment Residential building

Name of the client Sattva developers

Name of the contractor NCCCL

Project manager Mr. Ramesh Naragel

Structural consultancy Innotech Eng Consultant private limited

Architecture Consultancy Kembavi architecture foundation

value of the project 150 crores

Date of Commencement 22 Jan 2022

Date of Completion 10 Sep 2024

7
LAYOUT OF SITE

8
Inspections of Block
PHASE 1

9
PHASE 2

10
SAFETY HEALTH AND ENVIRONMENT INTRODUTION
It is important to know about the safety inductive points as to prevent the accidents taken in
the site. Labors at the site should be taken extra care. Therefore it is important to know some
points as follows:

• Fire protection, lifting, welding and gas cutting etc. Train all personnel in work-site
safety and operating procedure either on site or at a training facility.
• Identify and mark any hazardous materials
• Inspect equipment to be sure it is working properly.
• Use harness and other safety equipment while working at heights ,Provide personal
protective equipment to all employees, including hard hats, safety goggles, boots,
• Work gloves, ear plugs and face masks. Protect the public by barricading the
construction site during work hours after working hours, lock
• All points of entry. All vehicles shall be provided with reverse horns.
• Warning sign boards like men at work, deep excavation, go slow etc. shall be displayed at
work area
• The speed of vehicles plying in the work area shall be restricted to 15kmph maximum.
• It night work is to be carried out; the area shall be sufficiently provided with lighting

11
Personal Protective Equipment (PPE) Safety

12
ENVIRONMENTAL MANAGEMENT & MONITORING
• No workmen below 14 years or above 65 years
of age shall be engaged for a job. Child labor is
strictly prohibited.
• Eye protective equipment was used by the
labors engaged in activities such as welding,
chipping and other jobs that require eye
protection.
• Hand gloves were worn while handling sharp
articles, hot material, corrosive chemical,
welding, cutting etc. Adequate illumination at
workplace was ensured before starting the job
at night.
• All scaffoldings/ work platform was made
strong enough to take the expected load.
• All Machine and tools were inspected before
use. Defects were reported immediately to Store
manager
13
WEEK 2-3

14
 EXCAVATION
• BEFORE THE EXCAVATION WORK LEVELLING AND
MARKING IS DONE WHERE EXCAVATION IS REQUIRE.

METHODOLOGY
• Shrubs\Herbs and debris are removing from the area
of excavation.
• The marking area to be excavated is done including
working space
• Dewatering arrangements is made available at location.
• The level is recorded jointly with client and
contractor.
• The excavated soil is deposed to designated area for
stacking

15
PCC FOR RAFT/FOOTING
• After the excavation the pcc of raft or footing
is done where as pcc is plane cement
concrete.
• the base of the pcc is checked and ensures
that there are no loose pockets, slush or water
logging
• The top surface is checked to ensure that levels
are reached the founding depth as per drawing
and it is jointly recorded.

16
CONCRETING OF FOOTING WATERPROOFING OF FOOTING

17
 FORMWORK OF COLUMN
• Shuttering of the column after the
reinforcement of columns is done above the
footing
• Shuttering oil is applying during shuttering.

• The formwork shall be removed only after

16-24 hours after concreting

18
CURING OF COLUMN
Curing compounds are used to help prevent shrinkage cracking by
reducing the evaporation of water from the Concrete.

19
FORMWORK & CONCRETING FOR RETAINING WALL
IS code: IS: 456-2000, IS: 4990-1993, IS: 14687

Providing, fabricating and erecting from work at all levels and place where Ever needed specified as per
drawing, including striking/ de shuttering with Peri Duos or 12mm thick film coated Ply board shuttering
with drop head type adjustable steel props to full height without joints and with sufficient bracing.

20
WEEK 3-4

21
Reduced level (RL) of slab
Reduced level (RL) is a surveying term that refers to the vertical distance between a survey point and a
datum plane. The datum plane is an assumed level surface or line that is used as a reference to calculate
the level of other lines or surfaces

22
AutoCAD drawings

23
Bar bending
Bar bending work is the process of cutting and bending reinforcement steel into shapes for
structural elements like beams, slabs, columns, and footings. A bar bending schedule (BBS) is a
tabular representation of the reinforcement bars used in construction, which includes details such as
the bar type, length, weight, and desired bending shape

24
Quality assurance and Quality check
Pneumatic concrete vibrators
use air to remove trapped bubbles from concrete surfaces, making them more solid and durable. They
are used in construction to remove excess moisture and air pockets from freshly poured concrete,
which results in a safer, more attractive, and uniform finish.
CONCLUSION:

• We got the opportunity to learn the role and responsibility of site engineer,
quality assurance and quality check, work sequence format.
SAFETY HEALTH ENVIRONMENTAL MANAGEMENT & MONITORING

• We learned more on foundation, retaining wall and excavation etc.

• We also got an opportunity to learn software skills such as AutoCAD.

30
THANK
YOU