Scribd Logo
Upload

Welcome to Scribd!

  • 3 views

    Acid-Base Titration Presn

    Uploaded by

    hassan1470rbcraft
    This document describes an acid-base titration experiment to determine the molarity of acetic acid. The acetic acid solution of unknown concentration is titrated with a 0.1 M sodium hydroxide solution until neutralization. The titration is repeated three times and the results are averaged to calculate the molarity of the acetic acid, which is found to be 0.1015 M with 1.5% error.

    Copyright:

    © All Rights Reserved
    Download as PPTX, PDF, TXT or read online from Scribd

    Acid-Base Titration Presn

    Uploaded by

    hassan1470rbcraft
    3 views11 pages
    This document describes an acid-base titration experiment to determine the molarity of acetic acid. The acetic acid solution of unknown concentration is titrated with a 0.1 M sodium hydroxide solution until neutralization. The titration is repeated three times and the results are averaged to calculate the molarity of the acetic acid, which is found to be 0.1015 M with 1.5% error.

    Original Title

    Acid–base titration presn

    Copyright

    © © All Rights Reserved

    Available Formats

    PPTX, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document describes an acid-base titration experiment to determine the molarity of acetic acid. The acetic acid solution of unknown concentration is titrated with a 0.1 M sodium hydroxide solution until neutralization. The titration is repeated three times and the results are averaged to calculate the molarity of the acetic acid, which is found to be 0.1015 M with 1.5% error.

    Copyright:

    © All Rights Reserved
    Download as PPTX, PDF, TXT or read online from Scribd
    Download as pptx, pdf, or txt
    3 views11 pages

    Acid-Base Titration Presn

    Uploaded by

    hassan1470rbcraft
    This document describes an acid-base titration experiment to determine the molarity of acetic acid. The acetic acid solution of unknown concentration is titrated with a 0.1 M sodium hydroxide solution until neutralization. The titration is repeated three times and the results are averaged to calculate the molarity of the acetic acid, which is found to be 0.1015 M with 1.5% error.

    Copyright:

    © All Rights Reserved
    Download as PPTX, PDF, TXT or read online from Scribd
    Download as pptx, pdf, or txt
    You are on page 1of 11

    Acid–base

    titration
    CONTENTS

    01 Abstract
    A brief summary of your
    report
    02 Introduction
    Theory for the Titration

    03 Results and Discussions


    Explanation of results and
    comments about the results
    04 Conclusion
    conclusion about the report
    Abstract
    The purpose of this titration lab is to determine the molarity of the given acetic acid. This
    lab demonstrates how the molarity of an acid can be determined by titrating an acid with a
    base until the solution completely neutralizes. In this lab, a solution of acetic acid of
    unknown concentration is titrated with a solution ofsodium hydroxide of0.1 molarity.The
    goal is to ultimately determine the molarity of the acetic acid.Sodium hydroxide is first
    poured into a buret and 20.0 milliliters of acetic acid is poured into a flask with the addition
    of two drops of phenolphthalein. The initial amount of sodium hydroxide is recorded. The
    flask is then placed under the buret and the valve is opened to allow the sodium hydroxide
    to drain into the flask. As the sodium hydroxide is draining, it is simultaneously neutralizing
    with the acetic acid inside the flask. The flask is swirled to enhance the neutralization
    process. When a very faint pink color appears and does not disappear, the acetic acid has
    been completely neutralized with the sodium hydroxide. The valve is then closed and
    thefinalamount of sodium hydroxidethat was titrated is recorded. The final amount is them
    subtracted by the initial amount of sodium hydroxide to get the titrated amount. This entire
    procedure is then repeated twice more and the results of the total titrated amount are then
    averaged
    .
    INTRODUCTION
    An acid-base titration is an experimental procedure used to
    determined the unknown concentration of an acid or base by
    precisely neutralizing it with an acid or base of known
    concentration. This lets us quantitatively analyze the
    concentration of the unknown solution. Acid-base titrations
    can also be used to quantify the purity of chemicals.
    Results

    Volume Trial 1 Trial2 Average

    Initial volume 25ml 30ml --

    Final volume 14.9ml 19.8ml --

    Add volume 10.1 10.2ml 10.15ml


    calculation
    Molar concentration
    M=mv/v  = 0.1015M

    Error percentage

    0 . 1015 −0 . 1
    x 100=1 . 5 %
    0.1
    Discussion
    This allows for quantitative analysis of the concentration of an
    unknown acid or base solution. It makes use of the
    naturalization reaction that occurs between acids and bases and
    the knowledge of how acids and bases will react if their
    formulas are known. Acid-base titration can also be used to find
    percent purity of chemicals. When a weak acid reacts with a
    weak base, the equivalence point solution will be basic if the
    base is stronger and acidic if the acid is stronger
    Conclusion
    The purpose of this lab was to determine the molar concentration of a
    strong acid solution by titrating measured volumes with a strong base of
    known concentration. During
    this lab, the concentration of HCl solution was calculated. An automatic
    titrator and data collection system were used to generate titration curves,
    and thus calculate concentration. Using the equation for concentration (c=
    n/V), the average concentration of the HCl solution was found to be
    0.1015 M. The results of this laboratory were fairly accurate, since the
    calculated average concentration of the hydrochloric acid solution is close
    to the expected concentration of 0.1 M.
    Acknowledgements

    I thank the team for organizing the excellent work that we


    did, because the roles were distributed fairly and equally
    for all, and the result was satisfactory and we did not face
    any obstacles in terms of everyone’s cooperation
    References

    https://
    paperap.com/
    https://
    salve.digication.co
    m/

    https://
    www.chem.tamu.ed
    u/ https://
    ecampusontario.pre
    ssbooks.pub/
    THANK YOU

    You might also like