0% found this document useful (0 votes)
35 views44 pages

Chapter 3

The document discusses electric fields in material space and their properties. It introduces polarization in dielectrics and how applying an electric field causes the formation of dipoles. It also covers boundary conditions at dielectric-dielectric and conductor-dielectric interfaces, and how the tangential and normal components of the electric field and displacement field behave across boundaries.

Uploaded by

ethio universe
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
35 views44 pages

Chapter 3

The document discusses electric fields in material space and their properties. It introduces polarization in dielectrics and how applying an electric field causes the formation of dipoles. It also covers boundary conditions at dielectric-dielectric and conductor-dielectric interfaces, and how the tangential and normal components of the electric field and displacement field behave across boundaries.

Uploaded by

ethio universe
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
You are on page 1/ 44

Chapter Three

ELECTRIC FIELDS IN MATERIAL


SPACE

04/22/2024
 In the last chapter, we considered electrostatic fields in free space or a space
that has no materials in it.

 Thus what we have developed so far under electrostatics may be regarded as


the "vacuum" field theory.

 By the same token, what we shall develop in this chapter may be regarded as
the theory of electric phenomena in material space.

04/22/2024
 As will soon be evident, most of the formulas derived in Chapter 2 are still
applicable, though some may require modification.

 Just as electric fields can exist in free space, they can exist in material media.

 Materials are broadly classified in terms of their electrical properties as


conductors and nonconductors. Nonconducting materials are usually referred
to as insulators or dielectrics.

04/22/2024
CONVECTION AND CONDUCTION CURRENTS

The current (in amperes) through a given area is the electric charge passing
through the area per unit time.

That is,

We now introduce the concept of current density J. If current flows through a


surface S, the current density is the current through a unit normal area at that
point.

04/22/2024
assuming that the current density is perpendicular to the surface.

Thus, the total current flowing through a surface S is:

04/22/2024
Consider a filament of Figure 3.1. If there is a flow of charge, of density v, at
velocity U, the current through the filament is:

The Y-directed current density Jy is given by:

Hence, in general

04/22/2024
Figure 3.1 Current in a filament.

04/22/2024
 The current I is the convection current and J is the convection current density in
amperes/square meter (A/m2 ).

 Conduction current requires a conductor. A conductor is characterized by a large


amount of free electrons that provide conduction current due an impressed
electric field.

 When an electric field E is applied, the force on an electron with charge -e is

04/22/2024
If the electron with mass m is moving in an electric field E with an average drift
velocity u, according to Newton's law, the average change in momentum of the
free electron must match the applied force. Thus:

04/22/2024
here is the average time interval between collisions. This indicates that the drift
velocity of the electron is directly proportional to the applied field. If there are n
electrons per unit volume, the electronic charge density is given by:

04/22/2024
Eg.1. A wire of diameter 1 mm and conductivity 5 X S/m has free electrons/ when
an electric field of 10 mV/m is applied. Determine
(a)The charge density of free electrons
(b) The current density
(c)The current in the wire
(d)The drift velocity of the electrons. Take the electronic charge as e = -1.6 X C

04/22/2024
04/22/2024
POLARIZATION IN DIELECTRICS

 In the above sections, we noticed that the main difference between a conductor
and a dielectric lies in the availability of free electrons in the atomic outermost
shells to conduct current.
 Although the charges in a dielectric are not able to move about freely, they are
bound by finite forces and we may certainly expect a displacement when an
external force is applied.
 To understand the macroscopic effect of an electric field on a dielectric, consider
an atom of the dielectric as consisting of a negative charge - Q (electron cloud)
and a positive charge +Q (nucleus) as in Figure 3.2.
04/22/2024
Figure 3.2 Polarization of a nonpolar atom or molecule.

04/22/2024
 Since we have equal amounts of positive and negative charge, the whole atom
or molecule is electrically neutral.

 When an electric field E is applied, the positive charge is displaced from its
equilibrium position in the direction of E by the force F+ = QE while the negative
charge is displaced in the opposite direction by the force F- = QE.

 A dipole results from the displacement of the charges and the dielectric is said
to be polarized.

04/22/2024
 In the polarized state, the electron cloud is distorted by the applied electric field
E.

 This distorted charge distribution is equivalent, by the principle of superposition,


to the original distribution plus a dipole whose moment is:

 where d is the distance vector from -Q to +Q of the dipole as in Figure 3.2.

04/22/2024
 If there are N dipoles in a volume v of the dielectric, the total dipole moment
due to the electric field is:

 As a measure of intensity of the polarization, we define polarization P (in


coulombs/meter square)

04/22/2024
 Thus we conclude that the major effect of the electric field E on a dielectric is
the creation of dipole moments that align themselves in the direction of E.

 This type of dielectric is said to be nonpolar.

 Examples of such dielectrics are hydrogen, oxygen, nitrogen, and the rare gases.

 Nonpolar dielectric molecules do not possess dipoles until the application of


the electric field as we have noticed.

 Other types of molecules such as water, sulfur dioxide, and hydrochloric acid
have built-in permanent dipoles
04/22/2024
 We refer to and as bound (or polarization) surface and volume charge densities,
respectively, as distinct from free surface and volume charge densities and .
Bound charges are those that are not free to move within the dielectric material;
they are caused by the displacement that occurs on a molecular scale during
polarization.
 Free charges are those that are capable of moving over macroscopic distance as
electrons in a conductor.
04/22/2024
The total positive bound charge on surface S bounding the dielectric is

04/22/2024
 We now consider the case in which the dielectric region contains free charge.

 If is the free charge volume density, the total volume charge density , is given
by:

where

04/22/2024
 We would expect that the polarization P would vary directly as the applied
electric field E. For some dielectrics, this is usually the case and we have:

where , known as the electric susceptibility of the material, is more or less a


measure of how susceptible (or sensitive) a given dielectric is to electric fields.

or

04/22/2024
04/22/2024
 Where, is called the permittivity of the dielectric.

 is the permittivity of free space, approximately F/m, and

 is called the dielectric constant or relative permittivity.

 For free space and non dielectric material (such as metals) = 1.

04/22/2024
Eg.2. A dielectric cube of side L and center at the origin has a radial polarization
given by P = ar, where a is a constant and r = xax + yay + zaz . Find all bound charge
densities and show explicitly that the total bound charge vanishes.

04/22/2024
04/22/2024
04/22/2024
BOUNDARY CONDITIONS
 So far, we have considered the existence of the electric field in a homogeneous
medium.

 If the field exists in a region consisting of two different media, the conditions
that the field must satisfy at the interface separating the media are called
boundary conditions.

 These conditions are helpful in determining the field on one side of the
boundary if the field on the other side is known.

04/22/2024
We shall consider the boundary conditions at an interface separating

• dielectric () and dielectric ()

• conductor and dielectric

• conductor and free space

04/22/2024
To determine the boundary conditions, we need to use Maxwell's equations:

…………………………eq1

and

……………………………eq2

Also we need to decompose the electric field intensity E into two orthogonal
components:

04/22/2024
A. Dielectric-Dielectric Boundary Conditions
• Consider the E field existing in a region consisting of two different dielectrics
characterized by = and = as shown in Figure 3.3a.
• E1 and E2 in media 1 and 2, respectively, can be decomposed as

We apply eq. (1) to the closed path abcda of Figure 3.3a

04/22/2024
Figure 3.3 Dielectric-dielectric boundary.
04/22/2024
 E, undergoes no change on the boundary and it is said to be continuous
across the boundary

or

 That is, Dt, undergoes some change across the interface. Hence D, is
said to be discontinuous across the interface.
04/22/2024
Similarly, we apply eq. (2) to the pillbox (Gaussian surface) of Figure 3.3(b).

or

where s is the free charge density placed deliberately at the boundary.

If no free charges exist at the interface (i.e., charges are not deliberately placed
there), s = 0.

04/22/2024
Thus the normal component of D is continuous across the interface; that is, Dn
undergoes no change at the boundary.

Since D = E,

Showing that the normal component of E is discontinuous at the boundary.

04/22/2024
B. Conductor-Dielectric Boundary Conditions.
 This is the case shown in Figure 3.4. The conductor is assumed to be perfect (i.e., >
or c —> 0). Although such a conductor is not practically realizable, we may regard
conductors such as copper and silver as though they were perfect conductors.

 To determine the boundary conditions for a conductor-dielectric interface, we


follow the same procedure used for dielectric-dielectric interface except that we
incorporate the fact that E = 0 inside the conductor.

04/22/2024
Figure 3.4 Conductor-dielectric boundary.

04/22/2024
Applying eq. (1) to the closed path abcda of Figure 3.4(a) gives

Similarly, by applying eq. (2) to the pillbox of Figure 3.4(b) ,we get

or

04/22/2024
 Thus under static conditions, the following conclusions can be made about a
perfect conductor:

…………………………eq3

…………………………eq4

04/22/2024
C. Conductor-Free Space Boundary Conditions.
 This is a special case of the conductor-dielectric conditions
 The boundary conditions at the interface between a conductor and free space
can be obtained from eq.(4) by replacing r by 1.

04/22/2024
Figure 3.5 Conductor-free space boundary.
04/22/2024
e.g.3.

Also

Hence

04/22/2024
04/22/2024
THE END

04/22/2024

You might also like