Gases and Gas Laws

Download as ppt, pdf, or txt
Download as ppt, pdf, or txt
You are on page 1of 42

Topic #32: Introduction to

Gases
EQ:
How do we use the Kinetic
Molecular Theory to explain
the behavior of gases?
States of Matter
 2 main factors determine state:
• The forces (inter/intramolecular) holding particles together
• The kinetic energy present (the energy an object possesses due to its motion of the particles)
• KE tends to ‘pull’ particles apart
Kinetic Energy , States of Matter & Temperature
 Gases have a higher kinetic energy because their particles move a lot more
than in a solid or a liquid
 As the temperature increases, there gas particles move faster, and thus kinetic
energy increases.
Characteristics of Gases
 Gases expand to fill any container.
• random motion, no attraction
 Gases are fluids (like liquids).
• no attraction
 Gases have very low densities.
• no volume = lots of empty space
Characteristics of Gases
 Gases can be compressed.
• no volume = lots of empty space
 Gases undergo diffusion & effusion (across a barrier with small holes).
• random motion
Kinetic Molecular Theory of ‘Ideal’ Gases
 Particles in an ideal gas…
• have no volume.
• have elastic collisions (ie. billiard ball
particles exchange energy with eachother,
but total KE is conserved
• are in constant, random, straight-line
motion.
• don’t attract or repel each other.
• have an avg. KE directly related to
temperature ( temp= motion= KE)
Real Gases
 Particles in a REAL gas…
• have their own volume
• attract each other (intermolecular
forces)
 Gas behavior is most ideal…
• at low pressures
• at high temperatures
Why???
Real Gases
 At STP, molecules of gas are moving fast and are
very far apart, making their intermolecular forces
and volumes insignificant, so assumptions of an
ideal gas are valid under normal temp/pressure
conditions. BUT…

• at high pressures: gas molecules are pushed


closer together, and their interactions with each
other become more significant due to volume
• at low temperatures: gas molecules move
slower due to KE and intermolecular forces
are no longer negligible
Pressure

force
pressure 
area

Which shoes create the most pressure?


Atmospheric Pressure
 The gas molecules in the atmosphere are pulled
toward Earth due to gravity, exerting pressure

 Why do your ears ‘pop’ in an airplane?


Pressure
 Barometer
• measures atmospheric pressure

Mercury Barometer
Units of Pressure
 At Standard Atmospheric Pressure (SAP)
101.325 kPa (kilopascal)
1 atm (atmosphere)
760 mm Hg
(millimeter Hg) N
760 torr kPa  2
m
14.7 psi (pounds per square inch)
Standard Temperature & Pressure

STP
Standard Temperature & Pressure

0°C 273 K
-OR-
1 atm 101.325 kPa
Temperature: The Kelvin Scale
 Always use absolute temperature
(Kelvin) when working with gases.
ºC
-273 0 100
K
0 273 373

C  K  273 K = ºC + 273
Kelvin and Absolute Zero
 Scottish physicist Lord Kelvin suggested that -273oC (0K) was the temperature at which the motion particles
within a gas approaches zero.. And thus, so does volume)

 Absolute Zero:
http://www.youtube.com/watch?v=JHXxPnmyDbk
 Comparing the Celsius and Kelvin Scale:

http://www.youtube.com/watch?v=-G9FdNqUVBQ
Why Use the Kelvin Scale?
 Not everything freezes at 0oC, but for ALL substances, motion stops at 0K.
 It eliminates the use of negative values for temperature! Makes mathematic
calculations possible (to calculate the temp. twice warmer than -5oC we can’t
use 2x(-5oC) because we would get -10oC!)
Kelvin Scale vs Celsius Scale
Converting between Kelvin and Celsius

C  K  273 K = ºC + 273
a) 0oC =_____K
b) 100oC= _____K
c) 25oC =______K
d) -12oC = ______K
e) -273K = ______oC
f) 23.5K = ______oC
g) 373.2K= ______oC
How Did We Do So Far?
Learning Goal:

I will be able to understand


what kinetic energy is and how
it relates to gases and
temperature, describe the
properties of a real and ideal
gas and understand what
Absolute Zero is and how to
convert between the Kelvin and
Celsius temperature scales.
Part B: The Gas Laws
Part B:
Learning Goals
I will be able to describe
Boyle’s, Charles’ and Gay-
Lussac’s Laws relating T,
P and/or V and be able to
calculate unknown values
using the equations
derived from these laws, as
well as the combined gas
law.
1. Intro to Boyle’s Law
 Imagine that you hold the tip of a syringe on the tip of your finger
so no gas can escape. Now push down on the plunger of the
syringe.

What happens to the volume in the syringe?

What happens to the pressure the gas is exerting in the syringe?


1. Boyle’s Law
1. Boyle’s Law
 The pressure and volume of a gas are
inversely proportional (as one increases,
the other decreases, and vice versa
• at constant mass & temp

V
1. Boyle’s Law

Boyle’s Law leads to the mathematical


expression: *Assuming temp is constant

P1V1=P2V2
Where P1 represents the initial pressure

V1 represents the initial volume,

And P2 represents the final pressure

V2 represents the final volume


Example Problem:
A weather balloon with a volume of 2000L at a pressure of 96.3
kPa rises to an altitude of 1000m, where the atmospheric pressure
is measured to be 60.8kPa. Assuming there is no change in the
temperature or the amount of gas, calculate the weather balloon’s
final volume.
You Try:
Atmospheric pressure on the peak of Kilimanjaro can be as low as
0.20 atm. If the volume of an oxygen tank is 10.0L, at what
pressure must the tank be filled so the gas inside would occupy a
volume of 1.2 x 103L at this pressure?
2. Intro to Charles’ Law
 Imagine that you put a balloon filled with gas in liquid
nitrogen

What is happening to the temperature of the gas in the


balloon?

What will happen to the volume of the balloon?


2. Charles’ Law
2. Charles’ Law
 The volume and absolute temperature (K)
of a gas are directly proportional (an
increase in temp leads to an increase in
volume)
• at constant mass & pressure

T
2. Charles’ Law
2. Charles’ Law
 Charles’ Law leads to the mathematical
expression:

*Assuming pressure remains constant


Example Problem:
A birthday balloon is filled to a volume of 1.5L of helium gas in an
air-conditioned room at 293K. The balloon is taken outdoors on a
warm day where the volume expands to 1.55L. Assuming the
pressure and the amount of gas remain constant, what is the air
temperature outside in Celsius?
You Try:
A beach ball is inflated to a volume of 25L of air at 15oC. During
the afternoon, the volume increases by 1L. What is the new
temperature outside?
3. Intro to Gay-Lussac’s Law
 Imagine you have a balloon inside a container that ensures it
has a fixed volume. You heat the balloon.

What is happening to the temp of the gas inside the balloon?

What will happen to the pressure the gas is exerting on the


balloon?
3. Gay-Lussac’s Law
 The pressure and absolute temperature
(K) of a gas are directly proportional (as
temperature rises, so does pressure)
• at constant mass & volume

T
2. Gay-Lussac’s Law
 Gay-Lussac’s Law leads to the
mathematical expression:

*Assuming volume remains constant

Egg in a bottle to show Gay-Lussac's Law:


T & P relationship:
http://www.youtube.com/watch?v=r_JnUBk1JPQ
Example Problem:
The pressure of the oxygen gas inside a canister with a fixed
volume is 5.0atm at 15oC. What is the pressure of the oxygen gas
inside the canister if the temperature changes to 263K? Assume
the amount of gas remains constant.
You Try:
The pressure of a gas in a sealed canister is 350.0kPa at a room
temperature of 15oC. The canister is placed in a refrigerator that
drops the temperature of the gas by 20K. What is the new
pressure in the canister?
4. Combined Gas Law
By combining Boyle’s, Charles’ and Gay
Lussac’s Laws, the following equation is
derived:

P1V1 P2V2
=
T1 T2
Example Problem:
A gas occupies 7.84 cm3 at 71.8 kPa & 25°C. Find
its volume at STP.
Any Combination Questions 
a) A gas occupies 473 cm3 at 36°C. Find its volume at 94°C

b) A gas’ pressure is 765 torr at 23°C. At what temperature will the


pressure be 560. torr
How Did You Do?
Part B:
Learning Goals
I will be able to describe
Boyle’s, Charles’ and Gay-
Lussac’s Laws relating T,
P and/or V and be able to
calculate unknown values
using the equations
derived from these laws, as
well as the combined gas
law.

You might also like