Scribd
Upload
66 views2 pages

KAIZEN Road Map & OS

The document outlines an occupational standard for welding. It lists 12 core competencies for welding at NTQF Level II, including preparing engineering drawings, performing various welding processes, repairing welds, maintaining tools and equipment, and participating in workplace communication. It also provides knowledge bases on conceptual foundations, enablers, and methods for continuous improvement processes in welding.

Uploaded by

Abiy Mulugeta
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPT, PDF, TXT or read online on Scribd
66 views2 pages

KAIZEN Road Map & OS

The document outlines an occupational standard for welding. It lists 12 core competencies for welding at NTQF Level II, including preparing engineering drawings, performing various welding processes, repairing welds, maintaining tools and equipment, and participating in workplace communication. It also provides knowledge bases on conceptual foundations, enablers, and methods for continuous improvement processes in welding.

Uploaded by

Abiy Mulugeta
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPT, PDF, TXT or read online on Scribd
You are on page 1/ 2

Occupational Standard: Welding

Occupational Code: IND WLD


NTQF Level II
ቴክኖሎጂ
IND WLD2 01 0311 IND WLD2 02 0311 IND WLD2 03 0311
Prepare Basic Engineering Weld Using Shielded Metal Weld Using Gas Metal Arc
Drawing Arc Welding Process Welding Process (GMAW)
(SMAW)

IND WLD2 04 0311 INDቴክ. ክህሎት


WLD2 05 0311 IND WLD2 06 0311
Weld Using Oxyacetylene Repair Weld Perform Manual Heating and
Gas Process Thermal Cutting

IND WLD2 07 0311 IND WLD2 08 0311 IND WLD2 09 0311


Maintain Tools and Perform Mensuration and Work in Team Environment
Equipment Calculations

ሥራ ፈጣሪነት ካይዘን
IND WLD2 10 0311 IND WLD2 11 0311 IND WLD2 12 1012
Participate in Workplace Develop Business Practice Apply Continuous
Communication Improvement Processes
KAIZEN Corporate Culture:
An organization equipped with self-motivated endogenous and continual improvement
KAIZEN
in
Action
(KAIZEN Activities)
Knowledge Base No. 5 Knowledge Base No. 3 Knowledge Base No. 4
Analytical Tools Vehicle of Company-wide KAIZEN Methods
QC Seven (7) Tools Movement Muda-dori: Waste Elimination
1) Histogram; 2) Graphics; 3) Pareto QC Circle Basics Poka-yoke: Quality Management
Chart; 4) Check-sheet; 5) Scatter Diagram;
How to Operationalise QC Circle KYT: Safety Management
6) Control Chart; and
7) Fish-bone Chart Suggestion System TPM: Total Productive Maintenance
New QC 7 (7) Tools Management Organization for KAIZEN IE & SQC
any other analytical tools any other expertise

Knowledge Base No. 2


KAIZEN Starters
5S – Standardization of Work place Environment
Standardization of Operation

Knowledge Base No. 1


Conceptual Foundation
KAIZEN Concept Overview
– PDCA – A never-ending upward spiral
– Mind-set & Attitude
– TQM – Customer Satisfaction in QCD across total company with genuine participatory
corporate culture

Fundamental Enablers on Recurrent KAIZEN Agenda


 Business Planning  Cost Accounting and Operation Data  Trust and Employment

You might also like