(DSWD) Orientation On The Implementation of Basic Online Authentication Application

Republic of the Philippines
Philippine Statistics Authority
Briefing on the Use of Basic Online

Authentication Application in the DSWD
PhilSys Registration of 4Ps Beneficiaries
LANCE F. ALAMAR
Government Service Use Cases Division
Use Case Development and Management Service
PhilSys Registry Office
01 February 2024

A platform designed to authenticate the identity of a registered
person (4Ps Beneficiaries) seeking for a service, ensuring a
robust and high level identity verification.
4Ps Beneficiary
AUTHENTICATION WORKSTATION
COMPONENTS
Hardware Components of the Authentication Application
BIOMETRIC
INTERNET MOBILE
LAPTOP AUTHENTICATION
CONNECTIVITY PHONE/DEVICE
DEVICE
Note: Step 2 Registration Laptop
will be used for the DSWD Event
Software Components of the Authentication Application
BROWSER VIRTUAL
BIOMETRIC
PRIVATE TWO FACTOR
AUTHENTICATION
NETWORK (VPN) AUTHENTICATION
DEVICE INSTALLER
APP
Installer:
https://drive.google.com/drive/folders/1xT6q_RHF
MqqMepQ4Ty5fMtE_EWwzAB3Y?usp=drive_link
Setup of Authentication Workstation
1. Connect the FP Authentication Device to any

USB port of the laptop.
2. Open Web Browser.
3. Connect to VPN.
4. Encode Forti-token.
5. Launch the Basic Online Authentication
Application.
http://172.19.33.139:8080/RP-IDA/
Basic Online Authentication Application Login Page
1. Launch the Login Page 2. Enter username and password then click the
URL: http://172.19.33.139:8080/RP-IDA "login” button
1. Launch the Login Page 2. Enter username and password then click the
URL: http://172.19.33.139:8080/RP-IDA "login” button

3. After successful
Login,, Application
Modules will be
displayed
AUTHENTICATION MODULE
Authentication Module
Select the
“Authentication”
module
Select the
“Authentication”
module
Biometric
Authentication
Demographic
Authentication
Biometric
Authentication
1. Encode 16-digit PCN
and select ‘Biometric’
radio button
2. Select fingerprint icon

and click on Scan
button
Note: Iris and Face authentication

is under development
Biometric
Authentication
3. Place a finger
on the authentication device
4. After scan
completed, click ‘Submit’
button
5.
Authentication response is
either “YES DATA
MATCH” or “NO
MATCH”
Authentication Results
Successful Authentication Unsuccessful Authentication
Operational Guidelines
1. Authentication Process
Perform biometric authentication using PCN plus preferably either of the following Fingers:
1, 2, 6, or 7. If the result shows "YES, DATA MATCHED", meaning the identity of the person
is validated by PhilSys.
If the result is “NO MATCH”, try 3 attempts for each preferred fingers. If all results are “NO
MATCH”, record the PCN, Last Name, and Date of Birth.
2. Position of Finger
Ensure the correct positioning of the

client's finger while conducting
biometric authentication, as instructed
in the diagram. This will help to ensure
a good fingerprint capture.
3. FP Device Handling Instruction

Clean the glass portion (Platen Area) of
the sensor with the included cloths to
avoid latent fingerprint detection or
rejection
FOR QUESTIONS OR CLARIFICATIONS
Joana Maika Endaya Lance F. Alamar

Please contact: Information System Analyst I Project Development Officer III
Viber: 0968 851 8834 Viber: 09190097068
Email: [email protected] Email: [email protected]
THANK YOU!
http://www.psa.gov.ph
http://openstat.psa.gov.ph
https://twitter.com/PSAgovph
https://www.facebook.com/PhilippineStatisticsAuthority
SETTING UP OF AUTHENTICATION
WORKSTATION
AUTHENTICATION WORKSTATION
COMPONENTS
Hardware Components of the Authentication Application
BIOMETRIC
INTERNET MOBILE
LAPTOP AUTHENTICATION
CONNECTIVITY PHONE/DEVICE
DEVICE
Software Components of the Authentication Application
BROWSER VIRTUAL
BIOMETRIC
PRIVATE TWO FACTOR
AUTHENTICATION
NETWORK (VPN) AUTHENTICATION
DEVICE INSTALLER
APP
Setting Up Authentication Workstation
1. Connect the FP Authentication Device to any

USB port of the laptop.
2. Open Web Browser.
3. Connect to VPN.
4. Encode Forti-token.
5. Launch CRS Authentication Application.

http://172.19.33.139:8080/RP-IDA/
Republic of
Republic of the
the Philippines
Philippines
Philippine Statistics
Authority
Virtual Private Network (VPN) Installation

1. Install the VPN application 2. After the installation, a prompt will
appear to set and save the
configuration settings.
ID Authentication Training for the Civil Registration Service (CRS)

Republic of
Republic of the
the Philippines
Philippines
Philippine Statistics
Authority
Virtual Private Network (VPN) Installation
1. Enter required credentials:
Connection Name: CRS AUTH APP

Remote Gateway: 202.90.149.178
Customize port: 1044*
Client Certificate: None
Authentication: Save Login
Username: (sent via email)
2. Click “Save”.

Virtual Private Network (VPN) Setup
1. Double-click and Run the FortiClient VPN


2. Enter the Username and Password
3. Click on the Icon beside the VPN Name
Note: VPN Credentials are requested

from respective IT offices and sent via
email

4. Click Yes on the Security Alert Window
5. Get a Token from FortiToken Mobile


6. Enter Token from FortiToken Mobile
7. Click OK after providing the Token

8. Confirm successful connection to VPN
FortiToken Mobile
The FortiToken Mobile (FTM) enhances security while lowering the

risk of compromise associated with single-factor authentication
such as static passwords. It ensures that only authorized
individuals can access related resources for Basic Online
Authentication Application.

Fortitoken Activation Email Sample

Fortitoken Mobile Installation

1. Go to Play Store or App Store
2. In the search box, search “FortiToken Mobile”.
3. Tap Install.
4. After installation, tap Open to launch the application.

Fortitoken Mobile Set-up

5. At the FortiToken Mobile App. 6. Select the ‘Scan Barcode’. 6.1. Allow FortiToken Mobile to take 6.2. Scan the given barcode on
pictures and record video? Select ‘While received Email.
using the app’.

Fortitoken Mobile Set-up

7. You can now use the FortiToken Mobile To unhide the generated OTP digits, click the Expiration indicator of generated
and it will start to generate OTP digits. eye cross icon. OTP digits.

Fingerprint Authentication
Device Setup
Installer:
https://drive.google.com/drive/folders/1xT6q_RHFMqqMepQ4Ty5fMtE_EWwzAB3Y
Device Driver Installation



SBI Driver Installation




Firmware Update



BASIC TROUBLESHOOTING & BEST

PRACTICES
Unable to connect to VPN

• Ensure that the active internet connection is stable by performing a speed test. The
internet connection should exhibit a minimum of 20 Mbps for download/upload speeds.
• Ensure that the VPN configuration settings are correct, including the remote gateway,
custom port, and login credentials.
• Check if the VPN server is operational and not undergoing maintenance or

experiencing downtime. Contact the technical support team for server status updates.
Unable to access the CRS Authentication Application

• Ensure that the internet connection is stable and connected to VPN. Try accessing other websites to
confirm if the internet is functioning correctly.
• Attempt to access the Basic Authentication Application using a different web browser. This will help
determine if the issue is specific to the current browser that the user is using.
• Ensure that the user has entered the correct URL without any typos or misspellings.
• Confirm if the Basic Authentication Application server is operational and not undergoing maintenance
or experiencing downtime. Contact the technical support team for server status updates.
• If the user tries all troubleshooting steps and is still unable to access the Basic Authentication
Application, contact the support team for assistance.
Unable to detect the fingerprint authentication device and failed

biometric scan
• Ensure that the authentication device is properly connected to the workstation, the Mantra Mosip L1
MVDM service is running properly, and the configurations are properly set up.
• Disconnect the authentication device from the laptop, wait a few seconds, then reconnect the
authentication device.
• If the authentication device connects via USB or another interface, try using different ports to see if the
issue is related to a faulty port.
• Check if there is a firmware update available for the authentication device. Updating the firmware can
often resolve compatibility or performance issues.
Ensure the correct positioning of the client's

finger while conducting biometric
authentication, as instructed in the diagram.
This will help to ensure a good fingerprint
capture.
Restart the device SBI driver
1. Open Start menu then type Run then press Enter. Type "services" in the search
engine and press Enter.
Restart the device SBI driver.

2. Search for "Mantra Mosip L1 MVDM" and right-click.
3. Click "Start" if the service is not running, or "Restart" if it is already running.
Restart the device SBI drive

3. Relaunch the Basic Authentication Application page.
4. If all troubleshooting steps fail to resolve the issue, contact technical support for
further assistance.
“No data match” result

• Ensure that the internet connection is stable, the VPN is connected, and the
authentication device is properly connected.
• Ensure that the client’s data (PCN, Last Name, & Date of Birth) are encoded correctly.
• Ensure the correct positioning of the client's finger while conducting biometric
authentication.
• Confirm if the CRS Authentication Application server is operational and not
undergoing maintenance or experiencing downtime. Contact the technical support team
for updates.
HANDS-ON EXERCISE
Basic Online Authentication Sample Account
Username: 80370-CABALLRN
Password: Leyte08.rnc
THANK YOU!
http://www.psa.gov.ph
http://openstat.psa.gov.ph
https://twitter.com/PSAgovph
https://www.facebook.com/PhilippineStatisticsAuthority

(DSWD) Orientation On The Implementation of Basic Online Authentication Application

Uploaded by

Copyright:

Available Formats

(DSWD) Orientation On The Implementation of Basic Online Authentication Application

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

(DSWD) Orientation On The Implementation of Basic Online Authentication Application

Uploaded by

Copyright:

Available Formats

Republic of the Philippines

Philippine Statistics Authority

Briefing on the Use of Basic Online

Philippine Statistics Authority

Philippine Statistics Authority

Philippine Statistics Authority

Hardware Components of the Authentication Application

Philippine Statistics Authority

Software Components of the Authentication Application

Philippine Statistics Authority

Setup of Authentication Workstation

1. Connect the FP Authentication Device to any

Philippine Statistics Authority

Basic Online Authentication Application Login Page

Philippine Statistics Authority

Basic Online Authentication Application Login Page

Philippine Statistics Authority

Basic Online Authentication Application Login Page

Philippine Statistics Authority

Philippine Statistics Authority

Philippine Statistics Authority

Philippine Statistics Authority

2. Select fingerprint icon

Note: Iris and Face authentication

Philippine Statistics Authority

Philippine Statistics Authority

Philippine Statistics Authority

Philippine Statistics Authority

Ensure the correct positioning of the

3. FP Device Handling Instruction

Philippine Statistics Authority

FOR QUESTIONS OR CLARIFICATIONS

Joana Maika Endaya Lance F. Alamar

Philippine Statistics Authority

Philippine Statistics Authority

Philippine Statistics Authority

Philippine Statistics Authority

Hardware Components of the Authentication Application

Philippine Statistics Authority

Software Components of the Authentication Application

Philippine Statistics Authority

Setting Up Authentication Workstation

1. Connect the FP Authentication Device to any

2. Open Web Browser.

5. Launch CRS Authentication Application.

Virtual Private Network (VPN) Installation

ID Authentication Training for the Civil Registration Service (CRS)

Virtual Private Network (VPN) Installation

1. Enter required credentials:

Connection Name: CRS AUTH APP

ID Authentication Training for the Civil Registration Service (CRS)

Philippine Statistics Authority

Virtual Private Network (VPN) Setup

1. Double-click and Run the FortiClient VPN

Philippine Statistics Authority

Virtual Private Network (VPN) Setup

Note: VPN Credentials are requested

Philippine Statistics Authority

Virtual Private Network (VPN) Setup